Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 85 Cel; Operating Voltage: 730 V;
Median Price
$0.877
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Arrow
1+ parts
$0.654
100+ parts
$0.447
1k+ parts
$0.284
10k+ parts
$0.237
DigiKey
$1.100
$0.429
$0.328
-
J2 Sourcing AB
Bristol Electronics
$0.493
$0.212
$0.197
Dan-Mar Components
Component Stockers USA
$0.560
$0.390
$0.270
AZTECH Wire
$4.880
$4.690
$4.590
$4.500
Non-linear Resistors V575LU10P attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V575LU10P Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - Radial MOV Taping/Lead Trim 30/Jun/2017 Mult Dev Marking Chg 17/May/2019
PCN Packaging - Tape and Reel and Ammo Pack Radial MOV 29/Dec/2014
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1552200168
Molex
WIRE AND CABLE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NTC0805J47K
TE Connectivity's NTC0805J47K is a 47000 ohm NTC thermistor with a thermal sensitivity index of 4100 K. It has a rated temperature range of -55 to 125 °C and is used for temperature sensing applications. This surface mount device comes in a rectangular package with dual-ended terminals, ideal for various electronic systems.
B72214P2301K101
TDK
B72214P2301K101 by TDK is a VARISTOR with 140J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in electronic circuits due to its METAL OXIDE technology and DUAL ENDED terminal placement in a DISK PACKAGE.
RXEF185K-2
TE Connectivity's RXEF185K-2 is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. Ideal for temperature sensing applications, it operates at temperatures ranging from -40 to 85°C with a max AC voltage of 72V. Its radial terminal placement and disk package shape make it suitable for through-hole mounting in various electronic devices.
175-104LAF-301
175-104LAF-301 by Honeywell is a NTC thermistor with 100000 ohm resistance, ideal for temperature sensing applications. It comes in a rectangular package with wraparound terminals for surface mounting. With a thermal sensitivity index of 3800 K, it operates b/w -40 to 150 °C effectively.
1206L050/15YR
Littelfuse
1206L050/15YR by Littelfuse is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection, featuring dual-ended terminals and SMT package style. Ideal for applications requiring a max temperature of 85°C and min temperature of -40°C.
2920L075DR
2920L075DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
RKEF250
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 2.8 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Rated AC Voltage (URac): 60 V;
SMD100F-2
TE Connectivity's SMD100F-2 is a PTC resettable fuse with dual-ended terminals, designed for overload protection. It comes in a rectangular package for surface mounting, with a max operating temperature of 85°C. Ideal for applications requiring reliable non-linear resistors.
ASMD150F/33-2
TE Connectivity's ASMD150F/33-2 is a PTC resettable fuse with resistance of 0.068 ohm, operating voltage of 33V, and dual-ended terminal placement. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. This SMT package features flat terminals and meets AEC-Q200 and TS 16949 standards.
1812L110/33MR
1812L110/33MR by Littelfuse is a PTC resettable fuse with resistance of 0.06 ohm and max circuit DC voltage of 33V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40°C to 85°C, meeting CUL, TUV, and UL standards.
B57164K0101J000
B57164K0101J000 by TDK is a NTC thermistor with 100 ohm resistance, 5% tolerance, and 3200 K thermal sensitivity index. It is used for temperature compensation applications with a rated temperature range of -55 to 125 °C. The thermistor has radial terminal placement and matte tin finish, suitable for through hole mounting in various electronic devices.
MF-R090-0-99
Bourns
Bourns MF-R090-0-99 is a PTC resettable fuse with 60V operating voltage. It offers overcurrent protection in radial package shape for through-hole mounting. With -40 to 85°C temp range, matte tin finish, and CUL/TUV/UL standards, it's ideal for various applications.
0ZCJ0050AF2E
Bel Fuse
Bel Fuse's 0ZCJ0050AF2E is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package measuring 3.5mm x 1.8mm x 1.2mm. Operating temperature range from -40°C to 85°C ensures reliable performance in various conditions.
B72220P3271K101
B72220P3271K101 by TDK is a VARISTOR with 280J energy capacity, 275V RMS voltage, and 350V operating voltage. It has a radial shape for through-hole mounting applications in non-linear resistor circuits.
B72207S0500K101
The TDK B72207S0500K101 is a VARISTOR with a max energy absorbing capacity of 4.2 J and a max circuit RMS voltage of 50 V. It is commonly used in non-linear resistor applications to protect against voltage surges.
590-33AA33-503
590-33AA33-503 by Honeywell is a NTC thermistor with resistance of 50k ohm and tolerance of 0.2%. It is used for temperature sensing applications, featuring radial terminal placement and flexible wire terminals. With a thermal sensitivity index of 4261 K, it operates b/w -60 to 125 °C.
B72660M0271K072
B72660M0271K072 by TDK is a METAL OXIDE FILM VARISTOR with 21J energy capacity, 275V RMS voltage, and 350V operating voltage. It is a non-linear resistor in DO-214var package for surge protection applications. With DUAL terminals and J BEND shape, it operates b/w -40 to 85°C for surface mounting.
RXEF375K
TE Connectivity's RXEF375K is a PTC resettable fuse with 72V URac. It features radial terminal placement, disk package shape, and -40 to 85°C operating temperature range. Ideal for temperature sensing applications, it has 2 terminals and wire-shaped terminals for through-hole mounting in bulk packaging.
B57237-S330-M
TDK B57237-S330-M is a NTC thermistor with 33 ohm resistance, rated for 265V AC. It has thermal sensitivity index of 3300 K and operates b/w -55 to 170 °C. Ideal for soft start applications, this radial thermistor comes in disk package with through hole mounting.
0ZCJ0020FF2E
Bel Fuse's 0ZCJ0020FF2E is a PTC resettable fuse with resistance of 0.6 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package style measuring 3.5mm x 1.8mm x 0.75mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V575LA80CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Technology: METAL OXIDE FILM; Height (Package): 20 mm;
V575LA80BP
V575LA80BP by Littelfuse is a VARISTOR with 575V URac and 730V operating voltage. With 220J energy capacity, it's ideal for TEMPERATURE COMPENSATION in circuits. Featuring METAL OXIDE FILM tech, this radial varistor has a max temp of 125°C and -55°C min temp.
V575LA40AP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; No. of Terminals: 2;
V575LA10CPX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Technology: METAL OXIDE; Minimum Operating Temperature: -55 Cel; Package Style (Meter): Radial;
V575LA10PWX2855
VARISTOR; Manufacturer Series: LA;
V575LA10X2855
V575LA10PWX10
VARISTOR; Manufacturer Series: ZA;
V575LA40APW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 8.3 mm; Packing Method: BULK; Operating Voltage: 730 V;
V575LA10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 575 V; Packing Method: BULK;
V575LA10PX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Thermistor Application: TEMPERATURE COMPENSATION;
V575LA10CPX2855
VARISTOR;
V575LA10PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Terminal Placement: RADIAL;
V575LA10X1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; Terminal Placement: RADIAL;
V575LA10PW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Width (Package): 7.3 mm; Maximum Energy Absorbing Capacity: 65 J;
V575LA40A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 730 V; No. of Terminals: 2;
V575LA10CPX10
V575LA10PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; Rated Temperature: 85 Cel;
V575LA10PWX1347
V575L80BP
Non-linear Resistors;
V575LA10CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 11 mm; Length (Package): 10 mm; Reference Standard: CECC42201-006;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved