Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: TIN; Additional Features: IEC61051-1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Component Stockers USA
$9.530
AZTECH Wire
$19.740
Non-linear Resistors V460LA40CP attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Additional Features:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistor Type:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
V460LA40CP Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - Mult Dev Marking Chg 17/May/2019
PCN Packaging - Inner Packaging for Radial Bulk 16/May/2013
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
EU2B-YS3303C
Idec
ROTARY SWITCH;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Laube Technology
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Panjit International
SIOV-S14K275
TDK
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Tolerance: 10 %; Package Style (Meter): Radial;
55015
Measurement Specialties
NTC THERMISTOR; No. of Terminals: 2;
MF-SM150/33-2
Bourns
The Bourns MF-SM150/33-2 is a PTC resettable fuse with resistance of 0.06 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting.
SMD100F-2
TE Connectivity
TE Connectivity's SMD100F-2 is a PTC resettable fuse with dual-ended terminals, designed for overload protection. It comes in a rectangular package for surface mounting, with a max operating temperature of 85°C. Ideal for applications requiring reliable non-linear resistors.
TRF250-120UT
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 7 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel;
MF-R030
Bourns MF-R030 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It has radial terminal placement and wire shape, suitable for through hole mounting applications in various electronic circuits.
1206L020YRT
Littelfuse 1206L020YRT is a PTC resettable fuse with resistance of 0.6 ohm, dual-ended terminals, and rectangular package. Ideal for temperature sensing applications, it operates b/w -40 to 85°C. Suitable for surface mounting method.
NTCG163JF103FT1S
NTCG163JF103FT1S by TDK is a Non-linear Resistor with 10000 ohm resistance, 1% tolerance, and -40 to 150 °C operating temperature range. It is a surface mount thermistor in a rectangular package suitable for automotive applications meeting AEC-Q200 standards.
SMD075F/60-2
TE Connectivity's SMD075F/60-2 is a PTC resettable fuse with a rated AC voltage of 60V and max operating temp of 85°C. It features end terminal placement in a rectangular package, ideal for overload protection applications. The surface mount device has 2 terminals with wraparound shape and tin finish, packed in tape and reel format for easy installation.
MF-MSMF250/16X-2
Bourns MF-MSMF250/16X-2 is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 16V, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range from -40 to 85 °C and meets AEC-Q200, CUL, TUV, and UL standards.
V05P25P
V05P25P by Littelfuse is a VARISTOR with 2.5J energy capacity, 25V RMS voltage, and 31V operating voltage. It has METAL OXIDE FILM tech, RADIAL terminal placement, and THROUGH HOLE mounting type. Ideal for surge protection in electronics due to its high energy absorption and voltage ratings.
MF-R110-2
The Bourns MF-R110-2 is a PTC resettable fuse with resistance of 0.1 ohm and operating voltage of 30V. It has radial terminal placement, wire-shaped terminals, and operates b/w -40 to 85°C. Ideal for overcurrent protection in various electronic applications due to its compact disk package design.
MF-USMF150-2
MF-USMF150-2 by Bourns is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
MF-R010-2
The Bourns MF-R010-2 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage. It has radial terminal placement, wire-shaped terminals, and operates b/w -40 to 85°C. Ideal for overcurrent protection in various electronic applications due to its compact disk package design.
RXEF110K
TE Connectivity's RXEF110K is a PTC resettable fuse with resistance of 0.38 ohm and rated power dissipation of 1.5W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating at a max temperature of 85°C, it has a rated AC voltage of 72V and through-hole mounting type.
B72210-S271-K101
TDK's B72210-S271-K101 varistor has a max energy capacity of 43J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
NTCS0402E3214SMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0402E3214SMT is a NTC thermistor with 210k ohm resistance, 1% tolerance, and 0.07W power dissipation. Ideal for temperature sensing applications due to its thermal sensitivity index of 3590K and operating range from -40°C to 125°C. Features dual-ended terminals in a surface mount rectangular package.
V5.5MLA0603H23
Harris Semiconductor
VARISTOR;
PTS181224V150
Eaton Corporation
PTS181224V150 by Eaton Corporation is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and comes in a rectangular package. With a max operating temperature of 85°C and min operating temperature of -40°C, it is suitable for surface mount applications.
RXEF050S
TE Connectivity's RXEF050S is a PTC resettable fuse with rated AC voltage of 72V. Its dimensions are 7.9mm x 3mm x 13.7mm, suitable for temperature sensing applications. With radial terminal placement and through-hole mounting, it meets CSA, TUV, and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V460SM7
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Shape: J BEND; Reference Standard: UL; Maximum Energy Absorbing Capacity: 37 J;
V460LA10CPX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Packing Method: Bulk; Maximum Energy Absorbing Capacity: 95 J; Reference Standard: CECC42201-006, CSA, VDE;
V460LA10X2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 615 V; Technology: METAL OXIDE FILM;
V460LA10PWX10
VARISTOR; Manufacturer Series: ZA;
V460LA10X10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 56 J; Operating Voltage: 615 V;
V460LA10P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Maximum Energy Absorbing Capacity: 56 J;
V460LA20A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; No. of Terminals: 2;
V460LA10C
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 95 J; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 460 V;
V460LA10CPX2855
VARISTOR; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
V460LA10PWX1347
VARISTOR; Manufacturer Series: LA;
V460LA10PWX2855
V460LA10PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 460 V; Packing Method: BULK;
V460LA10CX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit RMS Voltage: 460 V; Technology: METAL OXIDE FILM; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 95 J;
V460LA10X1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Maximum Circuit DC Voltage: 615 V;
V460LA10CPX10
VARISTOR; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
V460LA10PX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Thermistor Application: TEMPERATURE COMPENSATION;
V460LA10PW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Terminal Placement: RADIAL; Rated Temperature: 85 Cel;
V460LA10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e0; Maximum Circuit RMS Voltage: 460 V;
V460LA10CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Rated Temperature: 85 Cel; Maximum Energy Absorbing Capacity: 95 J; Minimum Operating Temperature: -55 Cel;
V460LA10CX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 460 V; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 95 J;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved