Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 505 V; Minimum Operating Temperature: -55 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$20.480
Non-linear Resistors V385LC40BPX2855 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Additional Features:
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Rated Temperature:
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
V385LC40BPX2855 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - Mult Dev Marking Chg 17/May/2019
PCN Packaging - Inner Packaging for Radial Bulk 16/May/2013
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
EU2B-YS3103F
Idec
ROTARY SWITCH;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Dc Components
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
1N4148W-T
Rectron
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Sangdest Microelectronics (Nanjing)
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RXEF005
TE Connectivity
TE Connectivity's RXEF005 is a PTC resettable fuse with 20 ohm resistance and rated AC voltage of 60V. Ideal for temperature sensing applications, it has a max operating temp of 85°C and min of -40°C. With radial terminal placement and disk package shape, it is mounted through hole for bulk packing.
B72220P3301K101
TDK
The TDK B72220P3301K101 is a VARISTOR with 305J energy capacity, 385V operating voltage, and 1W power dissipation. It is used for surge protection in circuits with up to 300V RMS voltage. Ideal for applications requiring high transient voltage suppression in radial through-hole mounting setups.
MINISMDC014F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Terminal Shape: WRAPAROUND;
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
NTCS0603E3222FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
V430CH8
V430CH8 by Littelfuse is a varistor with 8J energy capacity, rated for 125°C temp. Ideal for surge protection in circuits with max operating voltage of 369V. Features SMT package style, dual-ended terminals, and metal oxide technology.
V5.5MLA0805NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.05 mm; JESD-609 Code: e3;
SMD100F-2
TE Connectivity's SMD100F-2 is a PTC resettable fuse with dual-ended terminals, designed for overload protection. It comes in a rectangular package for surface mounting, with a max operating temperature of 85°C. Ideal for applications requiring reliable non-linear resistors.
B72210-S300-K101
The TDK B72210-S300-K101 is a VARISTOR with 30V URac and 4.4J energy capacity. It operates b/w -40°C to 85°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable overvoltage protection in bulk packaging.
1210L050YR
1210L050YR by Littelfuse is a PTC resettable fuse with resistance of 0.25 ohm, operating voltage of 13.2V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and rectangular package shape.
RUEF135
TE Connectivity's RUEF135 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8 W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85 °C.
RUEF400-2
TE Connectivity's RUEF400-2 is a PTC resettable fuse with resistance of 0.05 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and rectangular package shape, it is designed for through hole mounting.
USP10975
Littelfuse USP10975 NTC Thermistor has 10000 ohm resistance with 1% tolerance. It is a chassis mount device with flexible wire terminals, operating b/w -55 to 125 °C. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3892 K.
RXEF300K
TE Connectivity's RXEF300K is a PTC resettable fuse with resistance of 0.1 ohm and rated power dissipation of 2.8W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and operates at 72V AC voltage. With radial terminal placement and disk package shape, it offers reliable protection in bulk packing method.
RF2628-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.25 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE;
VC060305A150RP
KYOCERA AVX
KYOCERA AVX's VC060305A150RP is a SMT VARISTOR with 2 terminals, operating voltage of 5.6V, and max energy absorption of 0.1J. Ideal for surge protection in electronics due to its dual-ended terminal placement and high temp range (-55 to 125°C).
0ZCJ0025AF2E
Bel Fuse
Bel Fuse's 0ZCJ0025AF2E is a PTC resettable fuse with resistance of 0.55 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package measuring 3.5mm x 1.8mm x 0.75mm.
2920L400/15MR
2920L400/15MR by Littelfuse is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 15V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting standards like CUL, TUV, and UL.
MINISMDC075F/24-02
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Packing Method: TR, EMBOSSED, 7 INCH;
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V385LA20APW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Height (Package): 20.5 mm; Packing Method: BULK; Technology: METAL OXIDE;
V385LA10PX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 505 V; Terminal Placement: RADIAL;
V385LA10CPX2855
VARISTOR;
V385LA20A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; No. of Terminals: 2;
V385LA10PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Rated Temperature: 85 Cel;
V385LA10PWX1347
VARISTOR; Manufacturer Series: LA;
V385LA20APWX10
VARISTOR; Manufacturer Series: ZA;
V385LA10CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Reference Standard: CECC42201-006; Additional Features: IEC61051-1; Terminal Shape: WIRE;
V385LA10PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Shape (Package): DISK PACKAGE;
V385LA10P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; Diameter (Package): 12.5 mm;
V385LA10X2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: RADIAL; Packing Method: BULK;
V385LA10X10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Terminal Placement: RADIAL; Minimum Operating Temperature: -55 Cel;
V385LA10PWX10
V385LA20AP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Diameter (Package): 17 mm; Additional Features: STANDARD: IEC61051-1; IEC61051-2; IEC60950-1;
V385LA10CPX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Shape: WIRE; Reference Standard: CECC42201-006, CSA, VDE; Minimum Operating Temperature: -55 Cel;
V385LA10PWX2855
V385LA10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Reference Standard: CECC42201-006; Package Style (Meter): Radial;
V385LA10CPX10
V385LA10PW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 51 J; Maximum Circuit RMS Voltage: 385 V;
V385LA10X1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e0; Operating Voltage: 505 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved