Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Shape (Package): RECTANGULAR PACKAGE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Supply Digital
1+ parts
100+ parts
1k+ parts
10k+ parts
Non-linear Resistors V30MLA0603A attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Package Style (Meter):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V30MLA0603A Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Formosa Microsemi
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
MF-R090-0-9
Bourns
Bourns MF-R090-0-9 is a PTC resettable fuse with resistance of 0.07 ohm, operating voltage of 30V, and max temp of 85°C. Ideal for overcurrent protection in various applications due to its radial terminal placement and through-hole mounting style.
B72650-M301-K72
TDK
The TDK B72650-M301-K72 is a VARISTOR with 2 terminals, DUAL placement, and J BEND shape. It has a max energy capacity of 9.6J and operates b/w -40 to 85°C. Ideal for applications requiring protection against voltage surges up to 385V in surface mount configurations.
B57237-S100-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 170 Cel; No. of Terminals: 2; Terminal Shape: WIRE;
RUEF250-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .07 ohm; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
RUEF135-2
TE Connectivity's RUEF135-2 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and rectangular package shape, it offers reliable protection at rated AC voltage of 30V.
V430CH8
Thomson Consumer Electronics
VARISTOR; Mounting Type: SURFACE MOUNT; Operating Voltage: 369 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 23 J; Maximum Circuit RMS Voltage: 275 V;
NTCS0805E3103JHT
Vishay Intertechnology
Vishay Intertechnology NTCS0805E3103JHT is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3940 K thermal sensitivity index. Ideal for temperature sensing applications due to its -40 to 150 °C operating range and SMT package style.
RF2567-000
TE Connectivity's RF2567-000 is a PTC resettable fuse with 1.17 ohm resistance and rated AC voltage of 72V. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and disk package shape, it offers 0.77W power dissipation in bulk packing method.
MINISMDC150F/24-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Reference Standard: CSA; TUV; UL;
B57861S0104F040
B57861S0104F040 by TDK is a NTC thermistor with 100k ohm resistance, 1% tolerance, and 4540 K thermal sensitivity index. It is used for temperature sensing applications in environments ranging from -55°C to 155°C. The thermistor has a disk package shape, radial terminal placement, and wire terminals for through hole mounting.
2920L150DR
2920L150DR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and surface mounting type.
ERTJ1VG103FA
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
V275LA20APX1347
V275LA20APX1347 by Littelfuse is a VARISTOR with 275V URac, 75J energy capacity, and -55 to 125°C operating temp. Used for TEMPERATURE COMPENSATION in circuits requiring protection against voltage surges. RADIAL package style with THROUGH HOLE MOUNT for easy installation.
B72207S0271K101
B72207S0271K101 by TDK is a VARISTOR with 275V RMS and 350V DC max circuit voltage. It has a 21J energy absorbing capacity, suitable for surge protection applications. With radial terminal placement and metal oxide technology, it operates b/w -40°C to 105°C.
MF-MSMF110/24X-2
The Bourns MF-MSMF110/24X-2 is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-R050-2-17
The Bourns MF-R050-2-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in applications requiring radial terminal placement and matte tin finish. Ideal for CUL, TUV, UL reference standards.
NTCG103JF103FT1H
NTCG103JF103FT1H by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 175°C max operating temp. Ideal for temperature sensing in automotive electronics due to AEC-Q200 standard compliance and high thermal sensitivity index of 3453 K.
SMD030F-2018-2
TE Connectivity's SMD030F-2018-2 is a PTC resettable fuse with 2.3 ohm resistance and 1.7 W power dissipation, suitable for overload protection applications. Featuring dual-ended terminals in a rectangular package (5.44mm x 4.93mm x 1.78mm), it operates b/w -40°C to 85°C with a max voltage of 60V, meeting CSA, TUV, and UL standards.
NTCS0805E3103FMT
Vishay Intertechnology's NTCS0805E3103FMT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3570 K thermal sensitivity index. Ideal for temperature sensing applications, it operates b/w -40 to 150 °C and comes in a SMT package with dual-ended terminals.
MF-SM075/60-2
Bourns MF-SM075/60-2 is a PTC resettable fuse with resistance of 0.23 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. With an operating temperature range from -40 to 85°C, it meets AEC-Q200, CUL, TUV, and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V30MLA1210NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: 1.2 J; Terminal Finish: MATTE TIN OVER NICKEL; Rated AC Voltage (URac): 25 V;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Packing Method: TR, PLASTIC, 7 INCH; Terminal Placement: DUAL ENDED;
V30MLA1210NHAUTO
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 2.54 mm; Height (Package): 2.87 mm; Maximum Energy Absorbing Capacity: 1.2 J;
V30MLA1210H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Packing Method: TR, PLASTIC, 7 INCH;
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 30 V;
V30MLA0805LNH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Rated AC Voltage (URac): 25 V; Length (Package): 3.05 mm; Height (Package): 1.1 mm;
V30MLA0805LNH by Littelfuse is a varistor with 30V operating voltage and 0.1J energy absorption. It has dual-ended terminals, SMT package style, and matte tin finish. Ideal for surge protection in electronics, it offers a max circuit RMS voltage of 25V and operates b/w -40 to 125°C.
V30MLA1210LNHAUTO
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Length (Package): 3.2 mm; Package Style (Meter): SMT; Technology: METAL OXIDE;
V30MLA1812NTX2902
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Manufacturer Series: MLA; Terminal Placement: DUAL ENDED;
V30MLA0805L
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Shape (Package): RECTANGULAR PACKAGE;
V30MLA0603NHX3084
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Shape (Package): RECTANGULAR PACKAGE;
V30MLA0805LH
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Chip / Die; Minimum Operating Temperature: -55 Cel;
V30MLA0603WT
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 30 V; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
V30MLA0603NHAUTO
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Packing Method: TR, EMBOSSED PLASTIC, 7 INCH; No. of Terminals: 2; Width (Package): .8 mm;
V30MLA0805LA
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; Package Style (Meter): Chip / Die;
V30MLA0603H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; Operating Voltage: 30 V;
V30MLA0805LN
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED;
V30MLA0603N
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 150 Cel; Maximum Circuit RMS Voltage: 25 V; Terminal Shape: WRAPAROUND;
V30MLA0603NT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Minimum Operating Temperature: -40 Cel; Shape (Package): RECTANGULAR PACKAGE;
V30MLA0603A
Intersil
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 150 Cel; Height (Package): .9 mm; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved