Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
V300LA4P by Littelfuse is a varistor with 300V URac and 405V operating voltage. It has a max energy capacity of 25J, suitable for temperature compensation applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C.
Median Price
$0.246
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Farnell
1+ parts
$0.183
100+ parts
$0.146
1k+ parts
$0.115
10k+ parts
$0.092
DigiKey
$0.310
$0.165
$0.145
$0.127
Mouser Electronics
$0.340
$0.181
$0.157
-
Newark
$0.363
$0.207
$0.184
$0.180
RS Americas
$0.407
$0.318
$0.253
Element14
$0.575
$0.337
$0.271
Arrow
$0.122
Verical
$0.121
Chip1Stop
Future Electronics
$0.087
$0.082
TTI
$0.142
$0.123
IBS Electronics
$0.053
$0.125
$0.044
TME
$0.280
$0.141
$0.090
$0.086
ComSIT Distribution GmbH
Vyrian
Rutronik
$0.030
NAC Semi
$0.178
R&J Components
ACDS - Activité Composants Distribution Service
Mil-Aero Solutions, Inc.
Nova Conductors
Prism Electronics
Semicontronic
$0.060
$0.058
Aztec Data Supply Inc.
$0.205
Continental Prestige Electronics
$0.272
$0.218
$0.113
$0.108
Allen Electronics Distributors
$0.410
$0.380
$0.370
Corohmni
$0.477
Perfect Parts
Metaverse IC Inc.
Kepictronics
GreenTree Electronics
Futuretech Components
Argo Parts USA
Bastille Electronics
The rated temperature of 85°C ensures stable performance in a wide range of operating conditions.
The thermistor application for temperature compensation ensures accurate temperature regulation and control in various devices.
With a maximum energy absorbing capacity of 25 Joules, this product provides reliable protection against voltage spikes and surges.
The maximum operating temperature of 125°C allows for high temperature applications without compromising performance.
The minimum operating temperature of -55°C ensures functionality even in extreme cold environments.
Being a varistor indicates that this product is specifically designed to protect electronic circuits from overvoltage conditions.
The maximum circuit RMS voltage of 300 volts allows for safe operation in circuits with varying voltage levels.
The rated power dissipation of 0.25 watts ensures efficient performance while dissipating heat effectively.
The maximum circuit DC voltage of 405 volts indicates that this product can handle high voltage levels without damage.
Non-linear Resistors V300LA4P attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Additional Features:
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Rated Temperature:
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
V300LA4P Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - Mult Dev Marking Chg 17/May/2019
PCN Packaging - Inner Packaging for Radial Bulk 16/May/2013
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
KYOCERA AVX
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BAV99-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Hy Electronic
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Taiwan Semiconductor
NTCALUG01T103G501
Vishay Intertechnology
Vishay Intertechnology's NTCALUG01T103G501 is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and chassis mount package. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, meeting AEC-Q200, CUL, and UL standards.
RXEF110
TE Connectivity
TE Connectivity's RXEF110 is a PTC resettable fuse with resistance of 0.38 ohm and rated power dissipation of 1.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and disk package shape, it is designed for through hole mounting in various electronic circuits.
SMD030F-2
TE Connectivity's SMD030F-2 is a PTC resettable fuse with a resistance of 4.8 ohm and rated AC voltage of 60V. It is commonly used for temperature sensing applications, with dimensions of 7.98mm x 5.44mm x 3.18mm and an operating temperature range of -40 to 85 °C.
B72210S2271K101
TDK
B72210S2271K101 by TDK is a VARISTOR with 350V operating voltage and 55J energy absorption. Its METAL OXIDE FILM technology makes it suitable for surge protection in various applications. With a radial package style, this varistor has a max circuit RMS voltage of 275V and can operate b/w -40°C to 105°C.
MF-USHT110KX-2
Bourns
MF-USHT110KX-2 by Bourns is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 9V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style. Compliant with AEC-Q200, CUL, TUV standards.
NB21K00103JBB
NB21K00103JBB by KYOCERA AVX is a non-linear resistor with a resistance of 10000 ohm. It is used for temperature compensation in various applications. With a rated temperature range of -55 to 150 °C, it has a thermal sensitivity index of 3630 K and can handle a max power dissipation of 0.07 W.
RUEF300
TE Connectivity's RUEF300 is a PTC resettable fuse with resistance of 0.08 ohm and rated power dissipation of 2W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85°C.
B72520T0250K062
B72520T0250K062 by TDK is a VARISTOR with 25V max circuit RMS voltage and 1J max energy absorption. It has DUAL ENDED terminals, SMT package style, and operates b/w -55 to 150 °C. Ideal for surge protection in electronics applications.
B72650-M301-K72
The TDK B72650-M301-K72 is a VARISTOR with 2 terminals, DUAL placement, and J BEND shape. It has a max energy capacity of 9.6J and operates b/w -40 to 85°C. Ideal for applications requiring protection against voltage surges up to 385V in surface mount configurations.
NTCLE203E3103FB0
Vishay Intertechnology NTCLE203E3103FB0 is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3977 K and operates b/w -40 to 125 °C. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape.
2920L700/12MR
Littelfuse
2920L700/12MR by Littelfuse is a PTC resettable fuse with resistance of 0.003 ohm and operating voltage of 12V. It is used for overcurrent protection, featuring dual-ended terminals and surface mounting type. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, conforming to CUL, TUV, and UL standards.
MF-SM030-2
The Bourns MF-SM030-2 is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and rectangular package shape.
PTCCL13H921DBE
Vishay Intertechnology PTCCL13H921DBE is a PTC thermistor with resistance of 0.9 ohm, rated AC voltage of 30 V, and tolerance of 20%. It is used for overload protection in applications requiring radial terminal placement and disk package shape. Operating temperatures range from -40°C to 175°C.
NANOSMDC050F/13.2-2
TE Connectivity's NANOSMDC050F/13.2-2 is a PTC resettable fuse with dual-ended terminals, rated at 0.8W power dissipation. It has a rectangular package shape and operates b/w -40°C to 85°C, making it ideal for temperature sensing applications in surface mount installations.
2016L050MR
2016L050MR by Littelfuse is a PTC resettable fuse with a resistance of 0.2 ohm and an operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
B72520T0300K062
B72520T0300K062 by TDK is a VARISTOR with 30V max circuit RMS voltage and 1.1J energy absorbing capacity. It has dual-ended terminals, SMT package style, and operates b/w -55°C to 150°C. Ideal for surge protection in electronic circuits requiring high reliability and compact design.
NCP21XV103J03RA
Murata Manufacturing
NCP21XV103J03RA by Murata is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications due to its NTC thermistor type, dual-ended terminal placement, and surface mounting type.
MF-R050
The Bourns MF-R050 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It comes in a radial disk package for through-hole mounting applications. Ideal for overcurrent protection in various electronic devices.
1206L016WR
1206L016WR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 30V, ideal for overcurrent protection applications. Featuring dual-ended terminals and surface mounting type, it has a compact package style (SMT) with dimensions of 3.4mm x 1.8mm x 1.45mm (LxWxH). Compliant with CUL, TUV, and UL standards, it operates b/w -40°C to 85°C temperature range.
TRF250-145U
TE Connectivity's TRF250-145U is a PTC resettable fuse with 2 terminals, rated for 60V AC voltage. Its disk package measures 6mm x 3.8mm x 10mm and operates b/w -40°C to 85°C. Ideal for temperature sensing applications with radial terminal placement.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V300LA2P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Diameter (Package): 9 mm;
V300LA20AP
V300LA20AP by Littelfuse is a non-linear resistor with a max energy absorbing capacity of 77 J. It is used for temperature compensation and has a rated AC voltage of 300 V. Its package style is radial, with a length of 20 mm and diameter of 17 mm.
V300LA40AP
V300LA40AP by Littelfuse is a VARISTOR with 300V URac and 405V operating voltage. With a max energy absorption of 165J, it's ideal for TEMPERATURE COMPENSATION in circuits. Featuring METAL OXIDE FILM tech, this radial varistor has a rated temp of -55 to 125 °C.
V300LA40CPX745
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Length (Package): 20 mm;
V300LA4PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Diameter (Package): 9 mm; Rated AC Voltage (URac): 300 V;
V300LA4PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: 25 J; JESD-609 Code: e3;
V300LA40CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Package Style (Meter): Radial;
V300LA10P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Length (Package): 16 mm; Additional Features: STANDARD: IEC61051-1; IEC61051-2;
V300LT4P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 25 J;
V300LA10X10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Maximum Circuit DC Voltage: 405 V; Technology: METAL OXIDE FILM;
V300LA10PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Maximum Circuit DC Voltage: 405 V;
V300LA10CX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 75 J; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 300 V; Technology: METAL OXIDE FILM;
V300LA10CPX10
VARISTOR; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
V300LA10X1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e0; Packing Method: BULK;
V300LA10X2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Operating Voltage: 405 V;
V300LA2
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin (Sn); Terminal Placement: RADIAL;
V300LA10C
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Terminal Shape: WIRE; Maximum Circuit DC Voltage: 517 V;
V300LA10CPX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel; Length (Package): 12.5 mm; Packing Method: Bulk;
V300LA10PWX10
VARISTOR; Manufacturer Series: ZA;
V300LA4
Harris Semiconductor
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved