Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 303 V; Maximum Circuit DC Voltage: 303 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Non-linear Resistors V175LA10C14 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated Power Dissipation (P):
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V175LA10C14 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Bkc Semiconductors
Panjit International
SMD0805B035TF
Brightking
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 6 V; Terminal Shape: WRAPAROUND;
MINISMDC020F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Reference Standard: CSA; TUV; UL;
MOV-10D431KTR
Bourns
The Bourns MOV-10D431KTR is a VARISTOR with 65J energy absorption, 275V RMS voltage, and 350V operating voltage. It is used for surge protection in applications requiring high transient energy handling capabilities. With a radial package style and through-hole mounting, it ensures reliable performance in diverse environments.
1206L035/16YR
Littelfuse 1206L035/16YR is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 16V, and max temp of 85°C. It is used for overcurrent protection in surface mount applications with dual-ended terminals and rectangular package shape.
VCAT06AG18120YAT1A
KYOCERA AVX
VCAT06AG18120YAT1A by KYOCERA AVX is a VARISTOR with 2 terminals, operating voltage of 18V, and max circuit RMS voltage of 14V. It is designed for non-linear resistor applications in automotive electronics due to its AEC-Q200 reference standard compliance and surface mounting type.
NTC0805J47K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTCG103JF103FT1
TDK
NTCG103JF103FT1 by TDK is a 10000 ohm NTC thermistor with 1% tolerance, operating at -40 to 125 °C. It has a rated power dissipation of 0.1 W and is used in temperature sensing applications due to its thermal sensitivity index of 3435 K.
B72220S2301K101
B72220S2301K101 by TDK is a VARISTOR with 250 J energy capacity, 300 V RMS voltage, and 385 V operating voltage. It is used for surge protection in various applications due to its METAL OXIDE FILM technology and radial package shape.
RXEF010-1
TE Connectivity
TE Connectivity's RXEF010-1 is a PTC resettable fuse with radial terminal placement and disk package shape. Ideal for temperature sensing applications, it operates b/w -40°C to 85°C. With through-hole mounting, this non-linear resistor has 2 wire terminals.
RXEF010
TE Connectivity's RXEF010 is a PTC resettable fuse with 4.5 ohm resistance, suitable for temperature sensing applications. Featuring radial terminal placement and disk package shape, it operates b/w -40 to 85°C with a max voltage of 60V. Ideal for through-hole mounting in various electronic circuits.
NTCS0603E3103GMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %;
0603L025YR
0603L025YR by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm, operating voltage of 9V, and max circuit DC voltage of 9V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style.
B57421V2103J062
The TDK B57421V2103J062 is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.21 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 3980 K and operating temperature range from -55 to 125 °C. The dual-ended rectangular package with SMT style makes it suitable for surface mount installations.
MINISMDC050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .62 mm; Packing Method: TR, EMBOSSED, 7 INCH;
MF-MSMF110-2
The Bourns MF-MSMF110-2 is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. Ideal for surface mounting with gold over nickel finish, it meets CUL, TUV, and UL standards.
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
B59607A0120A062
TDK B59607A0120A062 is a PTC thermistor with 30 ohm resistance, rated for 30V AC/DC. It offers overcurrent protection in SMT applications, with dual-ended terminals and wraparound shape. Operating from -40 to 125°C, it meets AEC-Q200 and UL standards for automotive and industrial use.
PRG18BB330MB1RB
Murata Manufacturing
Murata Manufacturing's PRG18BB330MB1RB is a PTC resettable fuse with 33 ohm resistance and 20% tolerance. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. With a rated AC voltage of 24V, it operates b/w -20 to 75°C, meeting CUL and UL standards.
RXEF050-AP
TE Connectivity's RXEF050-AP is a PTC resettable fuse with resistance of 0.5 ohm and rated power dissipation of 0.77W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, with radial terminal placement in disk package shape.
ERTJ1VG103FA
Panasonic
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V175LA10CPX2855
VARISTOR; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
V175LA10AX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
V175LA10APWX1347
VARISTOR; Manufacturer Series: LA;
V175LA10CPX10
VARISTOR; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
V175LA10C
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: 110 J; Maximum Circuit RMS Voltage: 175 V;
V175LA10APX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 85 Cel; Packing Method: BULK;
V175LA10CX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 110 J; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 175 V; Package Style (Meter): Radial;
V175LA10AP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: RADIAL; Terminal Shape: WIRE;
V175LA10AX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Rated Temperature: 85 Cel;
V175LA10APWX2855
V175LA10CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: 110 J; No. of Terminals: 2;
V175LA10APX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 85 Cel; Package Style (Meter): Radial;
V175LA10CPX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Package Style (Meter): Radial; Height (Package): 17 mm; Terminal Placement: RADIAL;
V175LA10APWX10
VARISTOR; Manufacturer Series: ZA;
V175LA10AX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Terminal Shape: WIRE; Shape (Package): DISK PACKAGE;
V175LA10A
V175LA10APW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 5.6 mm; Maximum Energy Absorbing Capacity: 55 J; Operating Voltage: 225 V;
V175LA10APX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: RADIAL; Minimum Operating Temperature: -55 Cel;
V175LA10C14P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; Minimum Operating Temperature: -55 Cel;
Harris Semiconductor
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved