Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Length (Package): 10 mm; Maximum Circuit RMS Voltage: 230 V; Terminal Shape: WIRE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Component Stockers USA
$4.230
AZTECH Wire
$6.480
$6.220
$6.100
$5.980
Non-linear Resistors V10P230AUTO2T attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Temperature:
Reference Standard:
Resistor Type:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V10P230AUTO2T Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LAN8720AI-CP-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Surge Components
Taiwan Semiconductor
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Microsemi
MICROSMD075F-2
TE Connectivity
TE Connectivity's MICROSMD075F-2 is a PTC resettable fuse with a rated AC voltage of 6V. Featuring dual-ended terminals and a rectangular package, it is ideal for temperature sensing applications. With a max operating temperature of 85°C, this surface-mount thermistor offers reliable protection in various electronic devices.
ERTJ0EG103JA
Panasonic ERTJ0EG103JA is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 125°C max operating temp. Ideal for temperature compensation applications due to its thermal sensitivity index of 3435 K and SMT package style for surface mounting.
USP12837
Littelfuse
Littelfuse USP12837 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3892 K. Ideal for temperature sensing applications, it has radial terminal placement and operates b/w -55°C to 125°C. Package style is chassis mount with flexible wire terminals.
0603L004YR
0603L004YR by Littelfuse is a PTC resettable fuse with 4 ohm resistance, suitable for overcurrent protection. It features dual-ended terminals, matte tin finish, and operates at temperatures ranging from -40 to 85 °C. This SMT package has a compact size of 1.8mm x 1mm x 0.75mm and can handle up to 24V DC voltage, meeting CUL, TUV, and UL standards.
B72220S3301K101
TDK
The TDK B72220S3301K101 is a VARISTOR with 300V max RMS voltage and 385V operating voltage. With METAL OXIDE FILM tech, it has 290J energy capacity. Ideal for surge protection in applications like power supplies due to its high energy absorption and radial terminal placement.
V20E25P
V20E25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temp of 85°C and -40°C min, it offers protection against voltage spikes up to 31V RMS and DC. Its radial package style makes it ideal for through-hole mounting.
VC060305A150RP
KYOCERA AVX
KYOCERA AVX's VC060305A150RP is a SMT VARISTOR with 2 terminals, operating voltage of 5.6V, and max energy absorption of 0.1J. Ideal for surge protection in electronics due to its dual-ended terminal placement and high temp range (-55 to 125°C).
V390CH8T
V390CH8T by Littelfuse is a VARISTOR with a max operating temperature of 150°C and a rated power dissipation of 0.25W. It is commonly used in non-linear resistor applications to protect circuits from voltage surges up to 330V.
NCP15WF104F03RC
Murata Manufacturing
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
CG0603MLA-5.5ME
Bourns
Bourns CG0603MLA-5.5ME is a varistor with 5.5V operating voltage, 0.1J energy capacity, and 4V RMS voltage. It's a surface mount device with dual-ended terminals, metal oxide film technology, and nickel barrier finish. Ideal for surge protection in electronics due to its compact rectangular package design.
MINISMDC050F-02
TE Connectivity's MINISMDC050F-02 is a PTC resettable fuse with 1 ohm resistance, operating voltage of 24V, and dimensions of 4.73mm x 3.41mm x 0.62mm. It can withstand temperatures from -40 to 85°C and is ideal for overcurrent protection in various electronic applications.
MPTS2920L150R
Meritek Electronics
MPTS2920L150R by Meritek Electronics is a PTC thermistor resistor with a rated power dissipation of 1.5W and an operating voltage of 33V. It is designed for surface mount applications and has a rectangular package shape with dual-ended terminal placement.
B57321V2103J060
B57321V2103J060 by TDK is a NTC thermistor with 10000 ohm resistance and 5% tolerance. It is used for temperature compensation applications, with a thermal sensitivity index of 3980 K. This surface mount device has a max operating temperature of 125°C and min of -55°C.
RF1403-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN OVER NICKEL;
MF-PSMF020X-2
The Bourns MF-PSMF020X-2 is a PTC resettable fuse with resistance of 0.65 ohm, suitable for overcurrent protection in circuits up to 9V DC. It features dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C. Ideal for applications requiring compact surface-mount components with gold-nickel finish.
B59960C0080A070
B59960C0080A070 by TDK is a PTC thermistor with 5.6 ohm resistance and rated AC voltage of 63V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With a max operating temperature of 125°C, it offers reliable performance in various electronic circuits.
2920L185DR
2920L185DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
B57164K0102J000
B57164K0102J000 by TDK is a NTC thermistor with 1000 ohm resistance, 5% tolerance, and 3730 K thermal sensitivity index. It is used for temperature compensation applications, featuring radial terminal placement and matte tin finish. Operating temperatures range from -55 to 125 °C.
TO103J2J
TO103J2J by Littelfuse is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and thermal sensitivity index of 3892 K. It is used for temperature sensing applications with a rated temperature range from -55°C to 150°C. The thermistor has radial terminal placement and through hole mounting, making it suitable for various temperature monitoring systems.
NTC0805J470R
TE Connectivity's NTC0805J470R is a 470 ohm NTC thermistor with 5% tolerance and 0.125 W power dissipation. It features dual-ended terminals in a rectangular package (2mm x 1.25mm x 0.5mm) for temperature sensing applications, suitable for surface mounting method.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V10P11PL1A5
VARISTOR; Manufacturer Series: LVULTRAMOV;
V10P11PB5
V10P11PA
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Packing Method: Ammo Pack; Reference Standard: CUL, TUV, UL;
V10P11PL1A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Terminal Placement: RADIAL;
V10P11PL1
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Reference Standard: CUL, TUV, UL; Length (Package): 12.5 mm;
V10P11PB
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Height (Package): 16 mm; Maximum Energy Absorbing Capacity: 4.2 J;
V10P11PL1A7
V10P11P1
V10P11PB7
V10P11PA1
V10P11PL17
V10P11PL11
V10P11PA7
V10P11PL1A1
V10P11P7
V10P11PB1
V10P11P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Width (Package): 5 mm; Terminal Shape: WIRE;
V10P11P5
V10P11PA5
V10P11PL15
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved