Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Packing Method: Bulk; Length (Package): 12.5 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Component Stockers USA
$2.640
AZTECH Wire
$4.880
$4.690
$4.590
$4.500
Non-linear Resistors V10E40PL2 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Reference Standard:
Resistor Type:
Sub-Category:
Technology:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V10E40PL2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - Mult DEV Design 20/Dec/2023
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Toshiba
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fagor Electronica S Coop
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Won-top Electronics
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Philips Components
Protek Devices
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
EZJZ0V800AA
Panasonic
The Panasonic EZJZ0V800AA is a varistor resistor with dual-ended terminals, SMT package style, and matte tin finish. It operates at temperatures from -40 to 85°C and has a max voltage of 18V DC. Ideal for surface mount applications requiring protection against voltage surges.
V18MLA0805LNHAUTO
Littelfuse
V18MLA0805LNHAUTO by Littelfuse is a VARISTOR with 18V operating voltage, 0.1J energy capacity, and 14V RMS circuit voltage. It is used in automotive applications due to AEC-Q200 standard compliance and surface mounting type.
B72220S0421K101
TDK
The TDK B72220S0421K101 is a VARISTOR with 175J energy capacity, 420V RMS voltage, and 560V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide technology, it ensures reliable performance in a compact disk package.
NCP18XH103F03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103F03RB is a 10000 ohm NTC thermistor with dual-ended terminals, SMT package style, and 1% tolerance. It is used for temperature sensing applications with an operating voltage of 5V and a thermal sensitivity index of 3380K. The thermistor has a max operating temperature of 125°C and min of -40°C, making it suitable for various temperature monitoring systems.
MINIASMDC014F-2
TE Connectivity's MINIASMDC014F-2 is a PTC resettable fuse with 1.5 ohm resistance and 60V operating voltage. It features dual-ended terminals, SMT package style, and is used for overcurrent protection applications. With AEC-Q200, UL, TS16949 standards compliance, it operates b/w -40 to 85 °C temperatures.
RXEF185-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Additional Features: 0.08-0.12 OHMS AT 20 DEG CEL; JESD-609 Code: e3;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .89 mm; Terminal Shape: WRAPAROUND;
0603L050YR
0603L050YR by Littelfuse is a PTC resettable fuse with 0.1 ohm resistance, 6V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in SMT applications with -40 to 85°C temp range. Compliant with CUL, TUV, UL standards for reliable circuit protection.
RGEF600
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Terminal Placement: RADIAL; Terminal Shape: WIRE;
1812L010DR
1812L010DR by Littelfuse is a PTC resettable fuse with resistance of 1.6 ohm, suitable for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with matte tin finish and max operating temperature of 85°C. Ideal for circuit protection with a max DC voltage of 30V.
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
RXEF050-1
TE Connectivity's RXEF050-1 is a PTC resettable fuse with 72V URac. It has a rated power dissipation of 0.77W and max operating temp of 85°C. Ideal for temperature sensing applications, it features radial terminal placement in a disk package for through-hole mounting.
V18AUMLA2220H
V18AUMLA2220H by Littelfuse is a VARISTOR with 18V operating voltage and 25J energy capacity. It has a metal oxide film technology, dual-ended terminals, and operates b/w -40°C to 150°C. Ideal for surge protection in automotive electronics due to AEC-Q200 compliance.
MICROSMD050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Operating Voltage: 13.2 V;
MOV-10D201KTR
MOV-10D201KTR by Bourns is a VARISTOR with 30J energy capacity, 130V RMS voltage, and 170V operating voltage. It is used for surge protection in applications requiring high transient suppression capabilities. The device has radial terminal placement, metal oxide film technology, and a disk package shape.
RUEF400-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE;
0ZCJ0025AF2E
Bel Fuse
Bel Fuse's 0ZCJ0025AF2E is a PTC resettable fuse with resistance of 0.55 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package measuring 3.5mm x 1.8mm x 0.75mm.
RUEF135
TE Connectivity's RUEF135 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8 W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85 °C.
NTHS1206N01N1003JE
Vishay Intertechnology's NTHS1206N01N1003JE is a NTC thermistor with 100k ohm resistance, 5% tolerance, and 0.28W power dissipation. Ideal for temperature compensation applications, it operates b/w -40°C to 125°C with thermal sensitivity index of 3974K. This surface mount device features dual-ended terminals in a rectangular package.
V82ZA20P
V82ZA20P by Littelfuse is a VARISTOR with 50V max circuit RMS voltage and 25J energy absorption. Operating at -55 to 125°C, it's ideal for surge protection in various applications like power supplies and industrial equipment. With a radial package style, it offers reliable protection against voltage spikes.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V10E25P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Height (Package): 16 mm; No. of Terminals: 2;
V10E150PL1T
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Maximum Energy Absorbing Capacity: 30 J; Terminal Shape: WIRE;
V10E150P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3;
V10E150PL1A5
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; No. of Terminals: 2;
V10E150PL2B
V10E150PL2B by Littelfuse is a VARISTOR with 150V RMS and 200V DC max circuit voltage. It has a 30J energy absorbing capacity, suitable for surge protection applications. With a temperature range of -55 to 125°C, it features METAL OXIDE FILM technology in a DISK PACKAGE shape for THROUGH HOLE MOUNT installation.
V10E150PL2T
V10E150PL2T by Littelfuse is a VARISTOR resistor with a max circuit RMS voltage of 150V and an operating voltage of 200V. It has a max energy absorbing capacity of 30J and is commonly used in applications requiring protection against overvoltage.
V10E150PL2T5
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Reference Standard: CECC42201-006;
V10E150PL3B7
V10E150PL3B7 by Littelfuse is a VARISTOR with 150V RMS voltage, 200V operating voltage, and 30J energy capacity. Ideal for surge protection in applications requiring high reliability under extreme temperatures (-55 to 125°C) such as industrial equipment and power supplies.
V10E150PL3T7
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; Operating Voltage: 200 V;
V10E175PL1T
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 225 V; Reference Standard: CECC42201-006;
V10E275P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Width (Package): 5.6 mm; No. of Terminals: 2;
V10E130L3B7
Renesas Electronics
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit RMS Voltage: 130 V; Maximum Energy Absorbing Capacity: 25 J; Operating Voltage: 170 V; Maximum Circuit DC Voltage: 170 V;
V10E130L3B1
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Technology: METAL OXIDE FILM; Operating Voltage: 170 V; Maximum Circuit DC Voltage: 170 V;
V10E130L3A7
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 25 J; Maximum Circuit DC Voltage: 170 V; Operating Voltage: 170 V; Technology: METAL OXIDE FILM;
V10E130L2T7
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit RMS Voltage: 130 V; Maximum Energy Absorbing Capacity: 25 J; Technology: METAL OXIDE FILM; Operating Voltage: 170 V;
V10E130L3T1
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 25 J; Technology: METAL OXIDE FILM; Package Style (Meter): Radial; Operating Voltage: 170 V;
V10E130L3A1
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 25 J; Package Style (Meter): Radial; Technology: METAL OXIDE FILM; Maximum Circuit DC Voltage: 170 V;
V10E130L2T1
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 25 J; Operating Voltage: 170 V; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 130 V;
V10E130L2B1
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 25 J; Operating Voltage: 170 V; Maximum Circuit RMS Voltage: 130 V; Technology: METAL OXIDE FILM;
V10E130L3T7
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 130 V; Operating Voltage: 170 V; Package Style (Meter): Radial;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved