Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Qualification: Not Qualified;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Component Stockers USA
1+ parts
$8.220
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$16.280
Silicon Surge Protectors P1100Q12BLRP attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
P1100Q12BLRP Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - SIDACtor Devices Die Grid Design 16/May/2017
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Tak Cheong Electronics Holdings
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
1552200168
Molex
WIRE AND CABLE;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Goodwork Semiconductor
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TISP4145M3LPR
Texas Instruments
TISP4145M3LPR by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current. Its cylindrical package body made of plastic/epoxy houses a thyristor surge protector, ideal for bottom terminal applications requiring a max breakdown voltage of 145V.
TCM1050P
TCM1050P by Texas Instruments is a Silicon Surge Protector with 5A Non Repetitive Peak On-state Current and 7V Repetitive Peak Reverse Voltage. Its PLASTIC/EPOXY package makes it suitable for surge protection applications in various industries. With a max operating temperature of 85°C, it offers reliable protection against voltage spikes.
TISP4300H3LPR
TISP4300H3LPR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 300V and uses a thyristor surge protector as the trigger device. Ideal for protecting electronic devices from voltage surges in various applications.
NP3500SAMCT3G
NP3500SAMCT3G by Onsemi is a single silicon surge protector with 20A non-repetitive peak current. It has a max breakdown voltage of 400V and operates b/w -55 to 150 °C. Ideal for protecting electronic devices from power surges in various applications.
TPA110B-12
STMicroelectronics
STMicroelectronics TPA110B-12 is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a plastic/epoxy package body, tin/lead terminal finish, and 133V max breakdown voltage. Ideal for applications requiring isolated case connection and axial terminal position.
TLP140MTR
TLP140MTR by STMicroelectronics is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 31A and a max breakdown voltage of 200V. This surface-mount device in a small outline package is ideal for protecting electronic circuits from voltage surges.
TISP4220H3LMR
TISP4220H3LMR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max DC off-state voltage of 160V and trigger device type as thyristor surge protector. Ideal for protecting electronic devices from voltage surges in various applications.
NP1800GBRLG
NP1800GBRLG by Onsemi is a single silicon surge protector with 170V DC off-state voltage and 220V max breakdown voltage. It features a thyristor surge protector configuration, suitable for applications requiring high holding current up to 150000mA. Ideal for UL recognized systems needing isolated case connection in plastic/epoxy package style.
TISP4165H3LMFR
TISP4165H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current and 135V off-state voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges, with an operating temperature range of -40 to 150°C.
P1500SD
Teccor Electronics
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP7380F3P
TISP7380F3P by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 5.7A and a max DC off-state voltage of 270V. Ideal for applications requiring protection against surges in electrical circuits.
TISP4082F3LM
TISP4082F3LM by Texas Instruments is a single silicon surge protector with 4A peak current, 82V breakdown voltage, and -40 to 150°C operating range. Ideal for protecting circuits from voltage spikes in various applications like telecommunications equipment and industrial controls.
TPA120A-18
STMicroelectronics TPA120A-18 is a single silicon surge protector with 30A non-repetitive peak on-state current. It has a max breakdown voltage of 160V, making it ideal for protecting electronic devices from power surges. The package shape is round with wire terminals, suitable for applications requiring isolated case connection.
TBU-CA065-300-WH
Bourns
SILICON SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN;
TISP4125H3LP
TISP4125H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current. It has a max breakdown voltage of 125V and uses thyristor technology. Ideal for protecting electronic devices from voltage surges in various applications.
SMP100-320
SMP100-320 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak on-state current and 270V repetitive peak reverse voltage. It is used for surge protection in applications requiring a trigger device with a max operating temperature of 150 °C, featuring surface mount capability and dual terminal position.
TISP4095M3LP
TISP4095M3LP by Texas Instruments is a single thyristor surge protector with 30A non-repetitive peak on-state current and 95V max breakdown voltage. It features a plastic/epoxy package body, wire terminals, and cylindrical package style. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4040H1BJR-S
TISP4040H1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 50A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 40V. Ideal for protecting electronic devices from power surges in various applications.
2EL3
2EL3 by Texas Instruments is a single silicon surge protector with 10A non-repetitive peak current and 265V max breakdown voltage. It is a surface-mount device in a ceramic, metal-sealed co-fired package, ideal for protecting electronic circuits from voltage spikes in various applications.
TISP4070H3LMR
TISP4070H3LMR by Texas Instruments is a single silicon surge protector with 60A peak current, 58V DC voltage, and 70V breakdown voltage. It is a thyristor surge protector used for protecting circuits from voltage spikes in applications requiring high reliability and durability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P1100EB70RP2
Littelfuse
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
P1100EAL70RP1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: THROUGH-HOLE;
P1100EAALP1
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Off-state Voltage: 90 V;
P1100EB
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Breakdown Voltage: 130 V;
P1100EALRP1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Finish: MATTE TIN;
P1100EAL
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Off-state Voltage: 90 V;
P1100EBALP1
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 2;
P1100EA70
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-609 Code: e0;
P1100EAL70RP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-609 Code: e3;
P1100EAALP2
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: THROUGH-HOLE;
P1100EARP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Non Repetitive Peak On-state Current: 20 A;
P1100EALRP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
P1100EAAP2
P1100EB70RP1
P1100EA70RP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Time At Peak Reflow Temperature (s): 60;
P1100EAL70
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Breakdown Voltage: 125 V;
P1100EA
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Repetitive Peak Reverse Voltage: 90 V;
P1100EA70RP1
P1100EAAP1
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
P1100EARP1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved