Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 110 A; Terminal Shape: TAB/BLADE; Body Height: 72.2 mm;
Median Price
$240.185
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
RS Americas
1+ parts
$204.230
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$276.140
$220.910
Allen Electronics Distributors
Fuses KLC110 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
KLC110 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5920-01-178-4230, 5920011784230
NIIN
011784230
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Pro-an Electronic
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Philips Components
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
Transys Electronics
NXP Semiconductors
0218.315HXP
Littelfuse
Littelfuse 0218.315HXP fuse, rated 250V, 0.315A, with 1.11J joule integral and time lag blow characteristic. Ideal for circuit protection in applications requiring supplemental fuses with dimensions of 5x20mm and operating temperatures from -55°C to 125°C. Compliant with CCC, CE, CSA, IEC, KC, SEMKO, UL, VDE standards.
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
AGC-10-R
Eaton Corporation
Eaton Corporation's AGC-10-R fuse, rated at 10A and 250V, with a blow characteristic of FAST, is ideal for circuit protection. With dimensions of 6.35x31.75mm and a pre-arcing rating of 0.492 A2/s, it offers reliable performance in inline/holder mounting applications while meeting CSA and UL standards.
LPJ-400SPI
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
JJS-25
The Eaton Corporation JJS-25 fuse, with a rated current of 25A and rated AC voltage of 600V, features a very fast blow characteristic. Measuring 14.3mm x 38.1mm in dimensions, it is an electric fuse suitable for inline/holder mounting applications with a high breaking capacity of 200kA. Compliant with CE, CSA, and UL standards.
ANL-80
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ATQR2-1/4
Mersen S A
Mersen S A's ATQR2-1/4 fuse, rated at 2.25A and 600V AC, features time delay blow characteristic for circuit protection with a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is suitable for inline mounting applications in various industries meeting CSA, CE, and UL standards.
029707.5.WXNV
Littelfuse 029707.5.WXNV is a MINI electric fuse with 7.5A rated current, 68J nominal joule integral, and 0.03s trip time. Ideal for circuit protection in automotive applications due to its TAB/BLADE terminal shape and high breaking capacity of 1000A.
0001.2534
Schurter Ag
Schurter Ag 0001.2534 fuse, rated 10A with 250V AC & 63V DC, offers time lag blow characteristic and 1500A breaking capacity. Ideal for electric circuit protection in applications requiring a compact 6.3x32mm size fuse with nickel terminal finish and CUL/UL standards compliance.
JJS-600
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
SS-5-4A-AP
Eaton Corporation's SS-5-4A-AP fuse has a rated current of 4A and nominal joule integral of 87J. With a blow characteristic of time delay, it is suitable for circuit protection at 250V AC voltage. The fuse, with dimensions 8.5mm x 4.3mm x 8.35mm, features a max operating temperature of 125°C and mounting via through hole terminals.
3413.0010.22
Schurter Ag's 3413.0010.22 fuse is a 3.2x1.6mm surface mount type with very fast blow characteristic, rated at 0.25A and 125V AC/63V DC for electric circuit protection. It has a pre-arcing rating of 0.0032 A2/s, operates b/w -55 to 90°C, and meets CUL; UL standards, suitable for various electronic applications requiring compact and efficient fuse protection.
ATM-15
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
MST160MA250V
SPC TECHNOLOGY/ MULTICOMP
MST160MA250V fuse by Spc Technology/ Multicomp is a 250V slow blow electric fuse with a rated current of 0.16A and nominal joule integral of 0.1331J. It has dimensions of 8.35mm x 4.3mm x 7.7mm, making it suitable for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 20ms.
LPJ-60SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
ATDR3
The Mersen S A ATDR3 fuse, rated at 3A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.4mm x 38.1mm and end cap terminals, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting applications, meeting CSA and UL standards.
LP-CC-6
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
0318002.HXP
Littelfuse 0318002.HXP fuse, rated at 2A and 250V, offers fast blow characteristic with a trip time of 5s. Ideal for circuit protection in various applications due to its compact size (6.99mm x 32.72mm) and high breaking capacity of 100A. Meets CE, CSA, KC, PSE, and UL standards for reliable performance.
ANN-500
Eaton Corporation's ANN-500 fuse is a 500A electric fuse with very fast blow characteristic. It has a rated AC voltage of 125V and rated breaking capacity of 2500A. Ideal for surface mount applications, it features built-in indicator and meets CSA and UL standards.
0297005.WXNV
Littelfuse 0297005.WXNV fuse, rated at 5A and 32V, offers quick 0.03s trip time with 37J nominal joule integral. Ideal for circuit protection in automotive applications due to its MINI size and TAB/BLADE terminals. Operating range from -40°C to 125°C ensures reliable performance in various conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KLC1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: TAB/BLADE; Body Height: 47.6 mm;
KLC10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 14.3 mm;
KLC100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 25.4 mm;
KLC-1000
Fuses;
KLC12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: TAB/BLADE; Body Height: 47.6 mm;
KLC125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -55 Cel;
KLC15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
KLC150
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 200000 A;
KLC17-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 17.5 A; Terminal Shape: TAB/BLADE; Dimensions: 14.3mm x 47.6mm;
KLC175
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -55 Cel;
KLC17.5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 17.5 A; Terminal Shape: TAB/BLADE; Body Height: 47.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved