Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fuses JTD10ID attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Blow Characteristic:
Built-in Features:
Additional Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
JTD10ID Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - EAC Mark 20/Feb/2018 Mult Devices 28/Feb/2019
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
Alpha & Omega Semiconductor
Vishay Semiconductors
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
Leshan Radio
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
ATM-20
Eaton Corporation
Eaton Corporation's ATM-20 fuse, with 20A rated current and 32V rated voltage, features fast blow characteristic and tin terminal finish. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications requiring a UL reference standard compliance.
FNQ-R-1-1/8
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
3413.0002.11
Schurter Ag
Schurter Ag's 3413.0002.11 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. With a very fast blow characteristic and high breaking capacity of 10A, it operates b/w -55°C to 90°C temperatures efficiently, meeting CUL and UL standards for reliable performance.
ATC-3
The Eaton Corporation's ATC-3 fuse is a 32V, 3A electric fuse with fast blow characteristic. It has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for circuit protection in various applications like automotive, industrial machinery, and electronics due to its compact size and UL standard compliance.
C10G32
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 400 V; Rated Current: 32 A; Terminal Shape: END CAP;
02170.05MXP
Littelfuse
Littelfuse 02170.05MXP fuse, rated at 0.05A and 250V, with fast blow characteristic and trip time of 0.003s. Ideal for circuit protection in applications requiring a 5x20mm size fuse with rated breaking capacity of 35A. Operating temperature range from -55 to 125°C makes it suitable for various electronic devices.
KTK-R-10
Eaton Corporation's KTK-R-10 fuse, rated at 10A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, it comes in a box packing method.
FNQ-R-3-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3.5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
3403.0271.23
Schurter Ag's 3403.0271.23 fuse has a rated current of 0.5A and a rated AC voltage of 277V, with dimensions of 15.4mm x 5.35mm x 5.35mm. It is a time lag electric fuse suitable for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms, meeting standards like CUL, UL, VDE.
3413.0332.22
Schurter Ag's 3413.0332.22 fuse is a time lag electric fuse with dimensions of 3.2x1.6x0.6mm, rated for 25A current and 32V AC voltage, suitable for circuit protection in applications requiring a high breaking capacity of 100A such as electronics or automotive systems.
CM32F
ELECTRIC FUSE;
8020.5021
Schurter Ag's 8020.5021 fuse, rated at 10A and 500V, offers a time lag blow characteristic with a nominal joule integral of 700J. Ideal for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 1500A and operating temperatures ranging from -40°C to 85°C.
SS-5-4A-AP
Eaton Corporation's SS-5-4A-AP fuse has a rated current of 4A and nominal joule integral of 87J. With a blow characteristic of time delay, it is suitable for circuit protection at 250V AC voltage. The fuse, with dimensions 8.5mm x 4.3mm x 8.35mm, features a max operating temperature of 125°C and mounting via through hole terminals.
TR/3216FF2-R
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: END CAP;
FRN-R-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
BK/MDL-2-R
BK/MDL-2-R by Cooper Electronic Technologies is a 250V, 2A electric fuse with a rated breaking capacity of 100A. Featuring time delay blow characteristic and nickel terminal finish, it is ideal for inline mounting applications. With dimensions of 6.35mm x 31.75mm, this fuse offers circuit protection per CSA and UL standards in various electronic devices.
LP-CC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
ATM-30LP
Eaton Corporation's ATM-30LP fuse is a 30A electric fuse with fast blow characteristic. It has dimensions of 10.9mm x 3.81mm x 8.73mm and rated voltage of 32V, suitable for inline mounting applications in circuits requiring protection up to 1000A at temperatures ranging from -40°C to 125°C.
BK-MDL-2-R
BK-MDL-2-R by Eaton Corp is a 250V, 2A time delay electric fuse with 62.3J nominal joule integral. Measuring 6.4x31.7mm, it has a rated breaking capacity of 100A and terminal finish in Ni. Ideal for inline mounting applications, it conforms to CE, CSA, and UL standards for reliable circuit protection.
LP-CC-6
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
JTD1.25ID
Littelfuse JTD1.25ID fuse, rated 1.25A with time delay blow characteristic, suitable for electric circuit protection at 600V AC and 300V DC. Features indicator and high breaking capacity of 200kA. Commonly used in inline/holder mounting applications.
JTD125ID
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
JTD17.5
Littelfuse JTD17.5 fuse, rated 17.5A with time delay blow characteristic and 200kA breaking capacity. Ideal for electric circuit protection at 600V AC/300V DC in various applications like inline mounting or holder setups per CSA and UL standards.
JTD17.5ID
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 17.5 A; Terminal Shape: END CAP;
JTD175
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE;
JTD175ID
JTD100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
JTD171/2ID
JTD110
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 110 A; Terminal Shape: TAB/BLADE;
JTD125
JTD100ID
JTD110ID
JTD170ID
JTD1.25
Littelfuse JTD1.25 fuse, rated 1.25A with time delay blow characteristic and 200kA breaking capacity, suitable for electric circuit protection at 600V AC/300V DC. Measuring 20.6mm x 57.2mm, it features end cap terminals and can be mounted inline or in a holder as per CSA/UL standards.
JTD12ID
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
JTD11/2ID
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
JTD150
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
JTD150ID
JTD11/4ID
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved