Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND; Dimensions: 3.2mm x 1.6mm x 0.6mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$10.330
Northwest PG Solutions
Native Components
Fuses FCD121500TP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
FCD121500TP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
Laube Technology
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
0217004.MXP
Littelfuse
Littelfuse 0217004.MXP fuse has a rated current of 4A and very fast blow characteristic. With dimensions of 5x20mm, it is suitable for circuit protection in applications requiring a max operating temperature of 125°C. The fuse has a rated AC voltage of 250V and trip time of 0.01s, making it ideal for use in inline/holder mounting setups.
0034.6618
Schurter Ag
Schurter Ag 0034.6618 fuse has 34J nominal joule integral, rated AC voltage of 250V, and a max operating temperature of 125°C. It is used for circuit protection with a time lag blow characteristic in applications requiring a rated current of 2A and rated breaking capacity of 35A.
ANL-300
Eaton Corporation
ANL-300 by Eaton Corp is a 300A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features END CAP terminals and an inline mounting feature. Ideal for circuit protection in applications requiring up to 80V DC voltage, compliant with CSA and UL standards.
FRN-R-6-1/4
Eaton Corporation's FRN-R-6-1/4 fuse, rated 6.25A at 250V AC/125V DC, features RK5 class with time delay blow characteristic. It has a compact body size of 14.22mm x 50.8mm and high breaking capacity of 200kA, suitable for electric circuit protection in various applications.
170E3933
The Eaton Corporation 170E3933 fuse is a 100A electric fuse with a rated breaking capacity of 60000A and rated DC voltage of 4000V. With dimensions of 365x57x70mm, it features TAB/BLADE terminals and can be mounted INLINE/HOLDER. Ideal for high-current circuit protection in industrial applications.
045201.5MRL
Littelfuse 045201.5MRL Nano Fuse with 1.5A current, 125V AC/DC voltage rating, and slow blow characteristic. Ideal for circuit protection in electronics with surface mounting feature and gold terminal finish.
FWP-600A
Eaton Corporation's FWP-600A fuse offers 66700 J nominal joule integral, 600 A rated current, and 50000 A rated breaking capacity. Ideal for circuit protection in applications requiring a 700 V AC/DC voltage rating. Dimensions: 63.5mm x 72.14mm with TAB/BLADE terminals and CE/CSA/UL certifications.
LP-CC-6
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
35421000029
Littelfuse 35421000029 fuse has a rated current of 10A, nominal joule integral of 500J, and rated AC voltage of 440V. It is used for circuit protection in applications requiring very fast blow characteristic and inline/holder mounting feature.
KTK-R-15
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
LPJ-200SP
LPJ-200SP by Eaton Corporation is a 600V J-class fuse with a rated current of 200A. It has a time delay blow characteristic and is suitable for circuit protection in applications such as inline or holder mounting.
KTK-12
The Eaton Corporation's KTK-12 fuse has a rated voltage of 600V and a rated current of 12A, with fast blow characteristic. It is an electric fuse with dimensions of 10.3mm x 38.1mm, suitable for circuit protection in various applications meeting CSA and UL standards.
NON-40
Eaton Corporation's NON-40 fuse, rated at 40A and 250V AC/125V DC, with a breaking capacity of 50kA. It is a K5 class electric fuse in a 20.57mm x 76.19mm body, suitable for inline mounting applications. Compliant with CE and UL standards, it offers reliable circuit protection in various electrical systems.
0JTD125.XXID
Littelfuse 0JTD125.XXID fuse, rated 125A & 600V AC/500V DC, with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring high breaking capacity of 200kA. Features indicator and complies with CSA & UL standards.
0297015WXNV
Littelfuse 0297015WXNV fuse with 270J joule integral, 15A rated current, and 32V DC voltage. Ideal for electric circuit protection in applications requiring inline mounting, such as automotive and industrial electronics. Operating temperatures range from -40°C to 125°C.
3403.0166.24
Schurter Ag's 3403.0166.24 fuse, rated at 1A and 250V, features a time lag blow characteristic with dimensions of 10.1mm x 3mm x 3mm. Suitable for electric circuit protection in various applications due to its high breaking capacity of 200A and wide temperature range from -55°C to 125°C.
KTK-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
JJS-50
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 50 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
ATDR1
Mersen S A
The Mersen S A ATDR1 fuse is a 1A, 600V time-delay electric fuse with a rated breaking capacity of 200kA. Measuring 10.4mm x 38.1mm, it features an end cap terminal shape and is suitable for inline/holder mounting applications in circuits requiring protection against overcurrents.
FNQ-3-1/2
Eaton Corporation's FNQ-3-1/2 fuse, rated 3.5A and 500V, features a time delay blow characteristic for electric circuit protection. With a compact size of 10.41mm x 38.1mm, it is ideal for inline mounting applications requiring a high breaking capacity of 10000A. Compliant with CE, CSA, and UL standards, it is commonly used in MIDGET fuse class circuits for industrial equipment protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FCD120200TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .2 A; Terminal Shape: WRAPAROUND;
FCD120250TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .25 A; Terminal Shape: WRAPAROUND;
FCD120315TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .315 A; Terminal Shape: WRAPAROUND;
FCD120400TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .4 A; Terminal Shape: WRAPAROUND;
FCD120500TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
FCD120630TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
FCD120800TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND;
FCD121100TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
FCD121125TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
FCD121160TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
FCD121200TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
FCD121250TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 64 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
FCD121315TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
FCD121400TP
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved