Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Fuses;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$165.831
100+ parts
1k+ parts
10k+ parts
$159.197
Northwest PG Solutions
$182.414
CY14X51M1 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
FNQ-R-20
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
KLDR01.5TXP
Littelfuse
KLDR01.5TXP by Littelfuse is a 1.5A CC fuse with 600V AC/300V DC ratings, 0.9302J joule integral, and 12s trip time. Ideal for electric circuit protection in various applications due to its CE/CSA/UL certifications and time-delay blow characteristic. Measures 10.3mm x 38.1mm with nickel terminal finish for inline mounting in bulk packaging.
028707.5.PXCN
Littelfuse 028707.5.PXCN fuse with 7.5A rated current, 60J nominal joule integral, and 1000A rated breaking capacity. Ideal for electric circuit protection in applications requiring a fuse with dimensions of 19.1mm x 5.1mm x 12.3mm and operating temperatures from -40°C to 105°C.
AGC-3-R
Eaton Corporation
AGC-3-R fuse by Eaton Corp is a 3A, 250V electric fuse with fast blow characteristic. With dimensions of 6.35x31.75mm and rated breaking capacity of 100A, it's ideal for inline circuit protection applications. Compliant with CSA and UL standards, it operates b/w -55 to 125°C temperatures efficiently in various electrical systems.
FWP-40A22F
The Eaton Corporation FWP-40A22F fuse is a 40A electric fuse with a rated AC voltage of 700V and rated DC voltage of 500V. With a nominal joule integral of 68J and rated breaking capacity of 200kA, it is suitable for circuit protection in various applications. The fuse has dimensions of 22.2mm x 58mm and can be mounted inline or in a holder.
FNQ-R-2-1/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
FNQ-R-3-1/2
Eaton Corporation's FNQ-R-3-1/2 fuse, rated at 3.5A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
LP-CC-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 4 A; Terminal Shape: END CAP;
BK-AGC-10-R
The Eaton BK-AGC-10-R fuse, rated at 10A and 250V, with dimensions of 6.3x32mm, is a fast blow electric fuse suitable for circuit protection in various applications. It has a nominal joule integral of 486J and a rated breaking capacity of 200A, meeting CSA and UL standards. The fuse operates b/w -55°C to 125°C temperature range with pre-arcing rating of 0.492 A2/s.
JJS-600
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
JKS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 40 A; Terminal Shape: END CAP; Dimensions: 27mm x 60.3mm;
0466001.NR
0466001.NR by Littelfuse is a 1206 size fuse with rated current of 1A and fast blow characteristic. It has a nominal joule integral of 0.0423J, rated AC voltage of 63V, and trip time of 0.2s. Ideal for circuit protection in applications requiring surface mount fuses with matte tin over nickel terminal finish.
LP-CC-6-1/4
Eaton Corporation LP-CC-6-1/4 fuse, rated 6.25A and 600V AC, features time delay blow characteristic for electric circuit protection. With a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL compliant systems.
NON-40
Eaton Corporation's NON-40 fuse, rated at 40A and 250V AC/125V DC, with a breaking capacity of 50kA. It is a K5 class electric fuse in a 20.57mm x 76.19mm body, suitable for inline mounting applications. Compliant with CE and UL standards, it offers reliable circuit protection in various electrical systems.
KTK-R-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
AMG-100
The Eaton Corporation's AMG-100 fuse, with dimensions of 29.2mm x 15.4mm x 9mm, is rated for 100A current and 48V DC voltage. It features TAB/BLADE terminals and UL standard compliance, making it ideal for electric circuit protection in various applications.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6.25 A; Terminal Shape: END CAP;
02170.04MXP
Littelfuse 02170.04MXP fuse, rated at 0.04A and 250V, offers fast blow characteristic with trip time of 0.003s. Measuring 5x20mm, it provides circuit protection in applications requiring a rated breaking capacity of 35A at temperatures ranging from -55 to 125°C.
0313025.HXP
Littelfuse 0313025.HXP fuse, rated 25A and 32V, features time lag blow characteristic. With dimensions of 6.35mm x 31.75mm, it's ideal for electric circuit protection in applications requiring a rated breaking capacity of 300A and pre-arcing rating of 16500 A2/s.
39211000440
Littelfuse 39211000440 TE5 fuse with 1A current rating, 250V voltage, and 8J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 35A. Dimensions of 8.5mm x 4mm x 8mm make it suitable for through-hole mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CY14X51G20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 20 A; Terminal Shape: END CAP; Body Height: 51 mm;
CY14X51M20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 20 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
CY14X51M2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 2 A; Terminal Shape: END CAP; Reference Standard: IEC;
CY14X51M25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
CY14X51G6
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 6 A; Terminal Shape: END CAP; Dimensions: 14mm x 51mm;
CY14X51M16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 16 A; Terminal Shape: END CAP; Rated Voltage: 690 V;
CY14X51G40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
CY14X51G50
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated Current: 50 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
CY14X51G25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Length/Diameter: 14 mm;
CY14X51G8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 8 A; Terminal Shape: END CAP; Dimensions: 14mm x 51mm;
CY14X51M12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 12 A; Terminal Shape: END CAP; Body Height: 51 mm;
CY14X51G4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 4 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
CY14X51G2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 14mm x 51mm;
CY14X51M10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
CY14X51G12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 12 A; Terminal Shape: END CAP; Dimensions: 14mm x 51mm;
CY14X51G10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
CY14X51G16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated Current: 16 A; Terminal Shape: END CAP; Reference Standard: IEC;
CY14X51G32
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 32 A; Terminal Shape: END CAP; Reference Standard: IEC;
CY14X51M100
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved