Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .4 A; Terminal Shape: PIN WIRE; Body Height: 8 mm;
Median Price
$1.160
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.735
1k+ parts
$0.518
10k+ parts
$0.456
Vyrian
-
Native Components
Northwest PG Solutions
Perfect Parts
Fuses 37404000430 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
37404000430 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Lite-on Semiconductor
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
FNQ-R-2-1/4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
SC-60
Eaton Corporation
Eaton Corporation's SC-60 fuse, rated at 60A and 480V, features fast and time delay blow characteristic. With a rated breaking capacity of 100kA, it is suitable for electric circuit protection in applications requiring inline mounting or holder installation. Compliant with CSA and UL standards, SC-60 fuse comes in a box packing method.
LP-CC-6-1/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6.25 A; Terminal Shape: END CAP;
7010.9850.63
Schurter Ag
The Schurter Ag 7010.9850.63 fuse is a 7x2mm electric fuse with a rated current of 3A and very fast blow characteristic. It has a nominal joule integral of 1.3J, rated AC/DC voltage of 125V, and rated breaking capacity of 300A. Ideal for circuit protection in applications requiring surface mount fuses with high breaking capacities and quick response times.
FWH-30A14F
The Eaton Corporation FWH-30A14F fuse, rated at 30A and 500V AC/DC, offers a high breaking capacity of 200kA. With a compact body size of 14.3mm x 50.8mm, it is ideal for electric circuit protection in various applications requiring reliable performance and compliance with CE, CSA, and UL standards.
63LET
The Eaton Corporation 63LET fuse, with a rated current of 63A and rated breaking capacity of 200kA, is ideal for circuit protection in applications requiring a nominal joule integral of 180J. With dimensions of 17.7mm x 26.2mm and mounting options like INLINE/HOLDER, it offers reliable protection at AC voltage up to 240V and DC voltage up to 150V.
AGC-2-R
AGC-2-R by Eaton Corp is a 2A electric fuse with 250V AC voltage rating and 17.52J nominal joule integral. It has a fast blow characteristic, rated breaking capacity of 100A, and operates b/w -55°C to 125°C. Commonly used for circuit protection in inline/holder mounting applications.
0297010WXNV
Littelfuse
Littelfuse 0297010WXNV fuse has 93J nominal joule integral, 10A rated current, and 32V DC voltage. With dimensions of 10.9mm x 3.8mm x 8.8mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C and min of -40°C.
DFJ-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 450 V; Rated Current: 40 A; Terminal Shape: END CAP;
FNQ-R-2-1/2
Eaton Corporation's FNQ-R-2-1/2 fuse, rated at 2.5A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is suitable for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 200000A.
37215000411
Littelfuse 37215000411 fuse has a rated current of 5A, trip time of 0.02s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a time lag blow characteristic at rated AC voltage of 250V.
0458010.DR
Littelfuse 0458010.DR is a NANO fuse with 10A rated current, 63V DC voltage, and 15J nominal joule integral. Ideal for circuit protection in applications requiring a surface mount nano-sized fuse with a trip time of 5 seconds. Operating temperature range from -55°C to 125°C makes it suitable for various electronic devices.
0251004.MAT1L
Littelfuse 0251004.MAT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in electronics due to its small size (2.8mm x 7.11mm) and high breaking capacity of 50A at -55°C to 125°C operating range. Compliant with CCC, CSA, PSE, QPL, TUV, UL standards for reliable performance.
8020.0608.H.PT
Schurter Ag's 8020.0608.H.PT fuse, rated at 40A and 250V AC, offers a time lag blow characteristic with a nominal joule integral of 5867J. Ideal for circuit protection in applications requiring a through-hole mounting feature and high breaking capacity up to 500A.
BD40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 550 V; Rated DC Voltage: 250 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
17.5TDLSJ16
The Eaton Corporation 17.5TDLSJ16 fuse is a 16A electric fuse with a rated AC/DC voltage of 17500V, offering a high breaking capacity of 50000A. With dimensions of 51mm x 292mm and built-in indicator features, it is commonly used for circuit protection in various applications requiring reliable overcurrent protection.
029707.5L
029707.5L by Littelfuse is a MINI fuse with 7.5A rated current and 32V DC voltage, featuring a trip time of 0.03s and pre arcing rating of 68 A2/s. It is used for circuit protection in applications requiring a compact size fuse with high breaking capacity and UL reference standard compliance.
BK/AGC-2-R
BK/AGC-2-R fuse by Cooper Industries is a 2A fast blow electric fuse with a rated voltage of 250V AC. It has a nominal joule integral of 0.00509 J and a rated breaking capacity of 100A, suitable for inline mounting applications. This nickel-finished fuse conforms to CSA and UL standards, making it ideal for circuit protection in various electronic devices.
SP/LPJ-400SP
Eaton Corporation's SP/LPJ-400SP fuse, rated 400A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 53.6mm x 38.3mm and TAB/BLADE terminals, it offers circuit protection for high breaking capacity applications in various industries. Compliant with CE, CSA, and UL standards, it is suitable for inline mounting/holders.
TCF90
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 90 A; Terminal Shape: TAB/BLADE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
37402000410
The Littelfuse 37402000410 is a TR5 fuse with a rated current of 0.2 A and a rated voltage of 250 V. It has a trip time/delay of 60 seconds and is suitable for circuit protection in applications such as electric fuses.
37404000410
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .4 A; Terminal Shape: PIN WIRE; Packing Method: BULK;
3740080041
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Body Height: 8 mm;
37400500410
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Fuse Size: TR5;
3740063000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Terminal Finish: Tin (Sn);
3740080000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Packing Method: TAPE AND REEL;
374006200
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 8.5 mm;
37400800410
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: .025 J;
3740050000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
37400630000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Rated Breaking Capacity: 50 A;
3740050043
ELECTRIC FUSE; Rated Current: .05 A; Terminal Finish: Matte Tin (Sn); Rated Breaking Capacity: 50 A; Body Length/Diameter: 8.5 mm; Reference Standard: CSA; UL;
3740063041
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Packing Method: BULK;
374008000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
374005041
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Terminal Finish: MATTE TIN;
37400800000
3740050041
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Body Height: 8 mm;
37400630410
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Terminal Finish: TIN;
374006241
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Blow Characteristic: TIME LAG;
374005000
37400500000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved