Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Packing Method: BULK;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$6.105
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$5.983
Fuses 3561160000 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
3561160000 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Panjit International
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Diotec Semiconductor Ag
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Micro Commercial Components
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
0678L9250-02
Bel Fuse
ELECTRIC FUSE; JESD-609 Code: e4; Terminal Finish: Silver (Ag) - with Nickel (Ni) barrier;
0157010DR
Littelfuse
Littelfuse 0157010DR fuse has a rated current of 10A and nominal joule integral of 26.46J, suitable for circuit protection in applications requiring very fast blow characteristic at up to 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mounting method using matte tin terminal finish.
ANL-300
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 300 A; Terminal Shape: TAB/BLADE;
ATDR1-6/10
Mersen S A
Mersen S A's ATDR1-6/10 fuse, rated 1.6A and 600V AC, features time delay blow characteristic for circuit protection with a high breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in applications requiring inline mounting such as electrical systems compliant with CSA and UL standards.
37211000411
Littelfuse 37211000411 fuse has a rated current of 1A and trip time of 0.02s, suitable for electric fuse circuit protection at 250V AC. With a blow characteristic of TIME LAG and pre arcing rating of 5.5 A2/s, it offers reliable performance in applications requiring a max operating temperature of 85°C.
3403.0155.24
Schurter Ag
Schurter Ag's 3403.0155.24 fuse is a TIME LAG type with 0.08A rated current and 250V AC/DC voltage, suitable for ELECTRIC FUSE circuit protection in various applications. With dimensions of 10.1mm x 3mm x 3mm and a rated breaking capacity of 200A, it offers reliable performance at temperatures ranging from -55°C to 125°C. Ideal for surface mount installations, this fuse has a nominal joule integral of 0.022J for efficient energy dissipation.
3413.0331.22
Schurter Ag's 3413.0331.22 fuse is a 3.2x1.6mm TIME LAG electric fuse with a rated current of 20A and rated DC voltage of 63V, suitable for circuit protection in applications requiring a max operating temperature of 90°C.
0451.160MRL
0451.160MRL by Littelfuse is a NANO fuse with 0.16A rated current and 125V DC voltage, suitable for electric circuit protection. It has a very fast blow characteristic and a rated breaking capacity of 50A, making it ideal for surface mount applications in various industries. With dimensions of 6.1mm x 2.69mm x 2.69mm, this fuse operates b/w -55°C to 125°C temperatures according to CSA and UL standards.
0297030.WXNV
Littelfuse 0297030.WXNV is a MINI fuse with 30A rated current, 1230J nominal joule integral, and 0.03s trip time. Ideal for electric circuit protection in automotive applications due to its compact size (10.9mm x 3.8mm x 8.8mm) and high breaking capacity of 1000A at rated voltage of 32V.
TCF60RN
Eaton Corporation
Eaton Corporation's TCF60RN fuse is rated for 600V AC and 300V DC with a 60A current. With time delay blow characteristic, it offers circuit protection in inline/holder mounting applications. Measuring 54.1mm x 25.4mm x 28.58mm, it meets CSA and UL standards for electrical safety.
KTK-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP;
FNQ-R-10
FNQ-R-10 by Eaton Corp is a 10A CC fuse with 600V AC voltage rating and time delay blow characteristic. It has nickel terminal finish, 200kA rated breaking capacity, and CE/CSA/UL standards compliance. Ideal for electric circuit protection in inline/holder mounting applications.
SP/LPJ-100SP
Eaton Corporation's SP/LPJ-100SP fuse is a 100A, time delay electric fuse with 600V AC and 300V DC ratings. It features TAB/BLADE terminals, silver finish, and dimensions of 28.6mm x 66.7mm. Ideal for inline mounting applications requiring high breaking capacity up to 300kA, compliant with CE, CSA, and UL standards.
37212500001
Littelfuse 37212500001 fuse has a rated current of 2.5A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With a blow characteristic of TIME LAG, it offers a rated breaking capacity of 35A and operates within -40 to 85°C temperature range.
028707.5.PXCN
Littelfuse 028707.5.PXCN fuse with 7.5A rated current, 60J nominal joule integral, and 1000A rated breaking capacity. Ideal for electric circuit protection in applications requiring a fuse with dimensions of 19.1mm x 5.1mm x 12.3mm and operating temperatures from -40°C to 105°C.
ATDR25
The Mersen S A ATDR25 fuse is a 25A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200000A.
0298450.ZXH
Littelfuse 0298450.ZXH MEGA fuse with 450A rated current, 32V DC voltage, and 1050000J nominal joule integral. Ideal for electric circuit protection in automotive applications due to its time delay blow characteristic and compact dimensions of 29.21mm x 19.05mm x 10.67mm.
04511.60MRL
Littelfuse 04511.60MRL fuse has a rated current of 1.6A and very fast blow characteristic, suitable for electric circuit protection at 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mount applications with gold terminal finish and CSA/PSE/UL standards compliance.
AJT125/400
Mersen S A's AJT125/400 fuse, rated 125A and 600V, features time lag blow characteristic. With dimensions of 54mm x 181mm, it is a J-class fuse with 200kA breaking capacity. Ideal for electric circuit protection in applications requiring inline mounting and compliance with IEC and UL standards.
0485001.DR
Littelfuse 0485001.DR is a NANO fuse with rated current of 1A and rated voltage of 250V, suitable for circuit protection in various applications. It has a fast blow characteristic, trip time of 60s, and nominal joule integral of 0.3044J. This surface mount fuse operates b/w -55°C to 125°C with a max breaking capacity of 100A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3561400000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 4 A; Terminal Shape: END CAP; Minimum Operating Temperature: -25 Cel;
3561200002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 2 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
3561125002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
3561315002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
3561250000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Length/Diameter: 6.3 mm;
35611600029
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
3561400002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 4 A; Terminal Shape: END CAP; Minimum Pre Arcing Time: 10 ms;
3561100002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1 A; Terminal Shape: END CAP; Nominal Joule Integral: 4.4 J;
35612000029
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 2 A; Terminal Shape: END CAP; Reference Standard: CE; CUL; UL;
35611250029
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Packing Method: BULK;
3561315000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Packing Method: BULK;
3561250002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Height: 32 mm;
3561160002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Dimensions: 6.3mm x 32mm;
35613150029
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Blow Characteristic: SLOW;
3561125000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Minimum Pre Arcing Time: 10 ms;
3561200000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 2 A; Terminal Shape: END CAP; Minimum Operating Temperature: -25 Cel;
3561100000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1 A; Terminal Shape: END CAP; Packing Method: BULK;
35611000029
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1 A; Terminal Shape: END CAP; Trip Time/Delay: .01 Seconds;
35612500029
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Minimum Operating Temperature: -25 Cel;
3561160000
Wickmann Usa
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 440 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Reference Standard: CUL; UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved