Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 3 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Rated AC Voltage (URac): 250 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$18.030
Component Stockers USA
$99.990
Native Components
$131.155
$125.909
Northwest PG Solutions
$144.270
Authorized Procurement Solutions
Non-linear Resistors 250R145-RAU attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Additional Features:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated AC Voltage (URac):
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
250R145-RAU Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Obsolescence/ EOL - Multiple Devices 12/Oct/2020
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Synsemi
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
B72260-B381-K1
TDK
The TDK B72260-B381-K1 is a VARISTOR with 1200J energy capacity, 385V RMS voltage, and 505V operating voltage. It has RADIAL terminals and RECTANGULAR PACKAGE shape. Ideal for surge protection in applications requiring high energy absorption capabilities at temperatures ranging from -40°C to 85°C.
V39CH8T
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 31 V; Terminal Placement: DUAL ENDED;
RUEF400K-AP
TE Connectivity
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
V10E25P
Littelfuse
V10E25P by Littelfuse is a VARISTOR with METAL OXIDE FILM tech, 13J energy capacity, and 25V RMS voltage. Ideal for surge protection in electronics due to its radial package style, -40 to 85°C operating temp range, and UL/CUL/TUV certifications.
MF-R050-2
Bourns
The Bourns MF-R050-2 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It features radial terminal placement and wire-shaped terminals, suitable for through-hole mounting applications in various electronic circuits.
NTHS1206N01N1003JE
Vishay Dale
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .28 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
2920L075/60MR
2920L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.3 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
NCP15WF104F03RC
Murata Manufacturing
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
ES110-0001
Honeywell Sensing And Control
ES110-0001 by Honeywell Sensing And Control is a NTC thermistor with 2000 ohm resistance, 5% tolerance, and thermal sensitivity index of 3468 K. It is used for temperature sensing applications in a rectangular package with panel mount terminal shape. Operating temperatures range from -40 to 150 °C.
B72207-S301-K101
The TDK B72207-S301-K101 is a VARISTOR with 300V max RMS voltage and 23J energy absorption. Suitable for applications requiring protection against voltage surges, it has a radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85°C, making it ideal for various electronic devices.
VCAT06AG18120YAT3A
KYOCERA AVX
VCAT06AG18120YAT3A by KYOCERA AVX is a VARISTOR with 18V operating voltage and 14V max RMS voltage. It has dual-ended terminals, SMT package style, and can operate b/w -55°C to 150°C. Ideal for automotive applications meeting AEC-Q200 standard.
RXEF050
TE Connectivity's RXEF050 is a PTC resettable fuse with 1.17 ohm resistance and rated power dissipation of 0.77 W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and radial terminal placement for easy installation in through-hole mounts.
1206L050/15YR-A
PTC RESETTABLE FUSE;
B72220S0681K101
B72220S0681K101 by TDK is a VARISTOR with 680V max RMS voltage and 895V operating voltage. With a max energy absorption of 250J, it is ideal for surge protection applications in electronics. Featuring radial terminal placement and metal oxide technology, this varistor has a temperature range from -40°C to 105°C.
B72210S0271K101
B72210S0271K101 by TDK is a VARISTOR with 275V RMS and 350V DC max circuit voltage. It has a 43J energy capacity, -40 to 105°C operating temp range, and radial package style. Ideal for surge protection in electronic circuits due to its high energy absorption capability.
NCU15XH103F6SRC
Murata Manufacturing's NCU15XH103F6SRC is a 10000 ohm NTC thermistor with dual-ended terminals for temperature sensing applications. It has a thermal sensitivity index of 3380 K and operates b/w -40 to 150 °C, suitable for surface mounting with a tolerance of 1%.
CG0402MLU-12G
The Bourns CG0402MLU-12G is a varistor with 12V operating voltage, -40 to 125°C temp range. It has dual-ended terminals, metal oxide film tech, and SMT package style. Ideal for surge protection in electronic circuits due to its compact size and high reliability.
B72214P2301K101
B72214P2301K101 by TDK is a VARISTOR with 140J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in electronic circuits due to its METAL OXIDE technology and DUAL ENDED terminal placement in a DISK PACKAGE.
B57861S0104F040
B57861S0104F040 by TDK is a NTC thermistor with 100k ohm resistance, 1% tolerance, and 4540 K thermal sensitivity index. It is used for temperature sensing applications in environments ranging from -55°C to 155°C. The thermistor has a disk package shape, radial terminal placement, and wire terminals for through hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
250R120U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Maximum Circuit RMS Voltage: 250 V;
250R080U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 14 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Reference Standard: CUL; TUV; UL;
250R120-RCU
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5.4 ohm; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 250 V; Thermistor Application: OVERLOAD PROTECTION;
250R080TZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; JESD-609 Code: e3; Terminal Shape: WIRE;
250R120-R1U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 6 ohm; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 250 V; Additional Features: 6 TO 16 OHMS MEASURED AT 20 DEG CEL;
250R120-RAU
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 7 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Shape (Package): RECTANGULAR PACKAGE;
250R120C-R3
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 2; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: 250R; Terminal Finish: Matte Tin (Sn);
250R120-RCZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5.4 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Terminal Placement: RADIAL;
250R080DR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 14 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Shape (Package): DISK PACKAGE;
250R120-R1ZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 6 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: 6 TO 16 OHMS MEASURED AT 20 DEG CEL; Manufacturer Series: 250R;
250R120-R2U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 8 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; No. of Terminals: 2;
250R120-R3ZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel;
250R120C-R1
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 2; Terminal Placement: RADIAL; Terminal Finish: Matte Tin (Sn); Thermistor Application: OVERLOAD PROTECTION;
250R120-RAZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 7 ohm; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 250 V; Minimum Operating Temperature: -40 Cel;
250R080TU
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 15 ohm; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 250 V; Thermistor Application: OVERLOAD PROTECTION;
250R120-R2ZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 8 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Radial; Terminal Placement: RADIAL;
250R120C-RC
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: 250R; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
250R080
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 22 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 5.8 mm; Width (Package): 4.6 mm;
250R080TDR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 15 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
250R080ZR
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 14 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 60 V; No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved