Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Height: 20 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
Fuses 235004.P attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
235004.P Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Transys Electronics
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
0001.2511
Schurter Ag
Schurter Ag's 0001.2511 fuse is a 5x20mm size with 5A current rating and 250V AC voltage. With a time lag blow characteristic, it offers circuit protection in applications requiring a rated breaking capacity of 1500A and pre arcing rating of 97.5 A2/s.
FNQ-1/2
Eaton Corporation
FNQ-1/2 by Eaton Corp is a 500V, 0.5A time delay fuse with 10000A breaking capacity. Inline mounting feature and end cap terminal shape make it ideal for electric circuit protection in various applications. Compliant with CSA and UL standards, it comes in bulk packing with dimensions of 10.3mm x 38.1mm.
125LET
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 240 V; Rated DC Voltage: 150 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
BK/ATC-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE;
032601.5HXP
Littelfuse
Littelfuse 032601.5HXP fuse, rated 1.5A and 250V, with time lag blow characteristic. Nominal Joule Integral of 40.1J for circuit protection in applications requiring a delay of up to 14400s at -55°C to 125°C operating temperature range. Mountable using INLINE/HOLDER method, complies with CE, CSA, PSE, UL standards.
170M3744
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated DC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
LPJ-10SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
FNQ-R-3
Eaton Corporation's FNQ-R-3 fuse, rated 3A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for circuit protection in applications requiring a rated breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline/holder mounting setups for electrical fuse protection.
ATM-20
Eaton Corporation's ATM-20 fuse, with 20A rated current and 32V rated voltage, features fast blow characteristic and tin terminal finish. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications requiring a UL reference standard compliance.
LPJ-70SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
028707.5PXCN
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
ATDR1-4/10
Mersen S A
ATDR1-4/10 by Mersen S A is a 1.4A time delay electric fuse with 600V AC and 300V DC ratings. It features an end cap terminal shape, inline mounting, and a compact size of 10.4mm x 38.1mm. Ideal for circuit protection in various applications meeting CSA and UL standards.
0678L9300-02
Bel Fuse
Bel Fuse 0678L9300-02 is a 30A electric fuse with 1000J nominal joule integral and 250V AC voltage rating. It has a trip time of 60s, suitable for circuit protection in applications requiring medium blow characteristic. Dimensions are 9.8mm x 3.05mm x 3.05mm, with surface mounting feature and CUL; UL reference standard compliance.
0297010WXNV
Littelfuse 0297010WXNV fuse has 93J nominal joule integral, 10A rated current, and 32V DC voltage. With dimensions of 10.9mm x 3.8mm x 8.8mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C and min of -40°C.
031302.5HXP
Littelfuse 031302.5HXP fuse, rated 2.5A at 250V, offers a time lag blow characteristic with a trip delay of 14400s. With a nominal joule integral of 130J, it provides supplemental circuit protection in applications requiring a max operating temperature of 125°C and pre-arcing rating of 130 A2/s.
JJN-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 160 V; Rated Current: 30 A; Terminal Shape: END CAP;
LP-CC-1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
LP-CC-6/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: .6 A; Terminal Shape: END CAP;
0452.500MRL
Littelfuse 0452.500MRL is a NANO size fuse with 0.5A rated current and 125V AC/DC voltage. It has a slow blow characteristic, 0.24J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in applications requiring surface mount fuses with gold terminal finish.
FRS-R-60
Eaton Corporation's FRS-R-60 fuse, rated at 600V AC/DC and 60A, features a time delay blow characteristic. With a compact body size of 27mm x 139.7mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
235005
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: END CAP; Nominal Joule Integral: 27.411 J;
235003M
ELECTRIC FUSE; Rated Current: 3 A; Terminal Shape: PIN WIRE; Resistance: .0347 ohm; Reference Standard: CE; CSA; PSE; UL; Fuse Class: Supplemental;
235002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
235004XE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: PIN WIRE; Blow Characteristic: FAST;
235003XE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Blow Characteristic: FAST;
235002XP
235005M
ELECTRIC FUSE; Rated Current: 5 A; Terminal Shape: PIN WIRE; Reference Standard: CE; CSA; PSE; UL; Maximum Operating Temperature: 125 Cel; Trip Time/Delay: 14400 Seconds;
235001.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
235003.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Nominal Joule Integral: 8.394 J;
235002M
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: PIN WIRE; Resistance: .0603 ohm; Fuse Size: 5x20mm; Body Length/Diameter: 20 mm;
235003XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; JESD-609 Code: e3;
235002XE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Reference Standard: CSA; KTL; METI; PSE; UL;
235004XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
235001XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Nominal Joule Integral: .48 J;
235003
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
235001
235001XE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Dimensions: 6mm x 22.5mm;
235002.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Body Height: 20 mm;
235004
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved