Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 100 A; Terminal Shape: END CAP; Rated Breaking Capacity: 60000 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Ampacity Inc.
1+ parts
$0.210
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$3.420
$3.280
$3.220
$3.150
Northwest PG Solutions
Native Components
Fuses 15NLE100E attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Trip Time/Delay:
Built-in Features:
Terminal Shape:
Mounting Feature:
15NLE100E Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Unitrode
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Renesas Electronics
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
4554
Jw Miller Magnetics
Other Semiconductors;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
0468001.NR
Littelfuse
Littelfuse 0468001.NR fuse, rated at 63V and 1A, with trip time of 0.0015s. Ideal for circuit protection in electronics due to slow blow characteristic and compact size of 3.18mm x 1.52mm x 0.58mm. Compliant with CSA and UL standards for reliable performance in various applications.
CM32F
Eaton Corporation
ELECTRIC FUSE;
0251001.MRT1L
Littelfuse 0251001.MRT1L PICO fuse, rated 1A at 125V, offers very fast blow characteristic in a compact size of 2.8mm x 7.11mm. Ideal for supplemental circuit protection in applications requiring quick response to overcurrent events with a trip time of 0.004s. Suitable for use in various industries due to its high breaking capacity and wide operating temperature range from -55°C to 125°C.
ATDR6
Mersen S A
Mersen S A's ATDR6 fuse, rated 6A with 600V AC & 300V DC voltage, features time delay blow characteristic. Measuring 10.4mm x 38.1mm, it has a rated breaking capacity of 200kA and is ideal for electric circuit protection in various applications.
0ATO020.V
0ATO020.V fuse by Littelfuse has a rated current of 20A, trip time of 0.1s, and nominal joule integral of 520J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and min operating temperature of -40°C. The fuse features TAB/BLADE terminals and a rated breaking capacity of 1000A.
KTK-R-25
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATDR1/2
Mersen S A's ATDR1/2 fuse, rated 0.5A with 600V AC & 300V DC, features time delay blow characteristic and inline mounting. With a body size of 10.4mm x 38.1mm, it offers circuit protection up to 200kA, meeting CSA and UL standards for electrical applications.
ATM-20
Eaton Corporation's ATM-20 fuse, with 20A rated current and 32V rated voltage, features fast blow characteristic and tin terminal finish. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications requiring a UL reference standard compliance.
0217005.HXP
Littelfuse 0217005.HXP fuse, rated at 5A and 250V, offers very fast blow characteristic with a trip time of 0.01s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
LPJ-400SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
MST2A250V
SPC TECHNOLOGY/ MULTICOMP
MST2A250V fuse by Spc Technology/Multicomp is a 2A, 250V slow blow electric fuse with a rated breaking capacity of 100A. With dimensions of 8.35mm x 4.3mm x 7.7mm, it is suitable for circuit protection in applications requiring a nominal joule integral of 32J and operating temperatures ranging from -55°C to 125°C.
0451010.MRL
0451010.MRL by Littelfuse is a NANO fuse with 10A rated current and 125V rated voltage. It has a very fast blow characteristic, 26.46J nominal joule integral, and trip time of 5s. Ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity.
04511.60MRL
Littelfuse 04511.60MRL fuse has a rated current of 1.6A and very fast blow characteristic, suitable for electric circuit protection at 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mount applications with gold terminal finish and CSA/PSE/UL standards compliance.
PTS120660V010
Eaton Corporation's PTS120660V010 is a 1206-sized electric fuse with a rated voltage of 60V and a rated current of 0.1A. It has a fast blow characteristic and is suitable for surface mount applications.
JKS-40
Eaton Corporation's JKS-40 fuse, rated at 600V and 40A with a fast blow characteristic, is ideal for electric circuit protection. With a compact body size of 27mm x 60.3mm and high breaking capacity of 200kA, it is suitable for inline mounting applications. This J-class fuse conforms to CE, CSA, and UL standards for reliable performance in various electrical systems.
FWP-32A22F
Eaton Corporation's FWP-32A22F fuse offers 32A rated current and 200kA rated breaking capacity. With a 55J nominal joule integral, it provides circuit protection for applications requiring up to 700V AC and 500V DC. This electric fuse, compliant with IEC and UL standards, is designed for inline/holder mounting in various industrial settings.
TCF70
The TCF70 by Cooper Industries is a 70A electric fuse with a rated AC voltage of 600V. It has a time delay blow characteristic and a minimum operating temperature of -10°C. The fuse has a body length/diameter of 76.45mm, a body width of 25.4 inch, and a body height of 32mm. It has a tin terminal finish and a rated breaking capacity of 300000A. The TCF70 is suitable for applications that require circuit protection in systems with a maximum operating temperature of 65°C and a rated DC voltage of 300V.
04515.00MRL
04515.00MRL by Littelfuse is a 5A fuse with 125V AC/DC rated voltage, suitable for electric circuit protection. With dimensions of 6.1mm x 2.69mm x 2.69mm and very fast blow characteristic, it operates b/w -55°C to 125°C temperature range. This surface mount fuse has a rated breaking capacity of 50A and gold terminal finish for various applications requiring reliable protection.
FNQ-R-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
FNQ-R-1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Packing Method: BOX;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15NLE2150E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 150 A; Terminal Shape: END CAP; Dimensions: 162.05mm x 606.43mm;
15NLE-20EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 20 A; Terminal Shape: END CAP; Body Length/Diameter: 76.2 mm;
15NLE-10EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Breaking Capacity: 60000 A;
15NLE2-125EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 125 A; Terminal Shape: END CAP; Body Height: 606.4 mm;
15NLE2100E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 100 A; Terminal Shape: END CAP; Blow Characteristic: MEDIUM;
15NLE-15ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 15 A; Terminal Shape: END CAP; Additional Features: HERMITICALLY SEALED PART NUMBER;
15NLE2-150EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 150 A; Terminal Shape: END CAP; Body Height: 606.4 mm;
15NLE-100EL
15NLE-20ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 20 A; Terminal Shape: END CAP; Dimensions: 76.2mm x 606.43mm;
15NLE-10ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 10 A; Terminal Shape: END CAP; Additional Features: HERMITICALLY SEALED PART NUMBER;
15NLE2125E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 125 A; Terminal Shape: END CAP; Rated Breaking Capacity: 60000 A;
15NLE2-100EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 100 A; Terminal Shape: END CAP; Body Height: 606.4 mm;
15NLE-15EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 15 A; Terminal Shape: END CAP; Rated Breaking Capacity: 60000 A;
15NLE2-125ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 125 A; Terminal Shape: END CAP; Dimensions: 162.05mm x 606.43mm;
15NLE10E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 10 A; Terminal Shape: END CAP; Dimensions: 76.2mm x 606.43mm;
15NLE20E
15NLE-100ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 15500 V; Rated Current: 100 A; Terminal Shape: END CAP; Additional Features: HERMITICALLY SEALED PART NUMBER;
15NLE15E
15NLE2-100ES
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved