Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 355 A; Terminal Shape: TAB/BLADE; Trip Time/Delay: .2 Seconds;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.225
100+ parts
1k+ parts
10k+ parts
$0.216
Northwest PG Solutions
$0.248
$0.218
Fuses 157.5700.6351 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Trip Time/Delay:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Shape:
Mounting Feature:
Packing Method:
157.5700.6351 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - LFPCNA0089 Strip Fuse Voltage Rating Change 8-10-15
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Mde Semiconductor
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LL4148
Changzhou Starsea Electronics
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
S218194
Mersen S A
Mersen S A's S218194 fuse has 10A rated current, 500V AC voltage, and 120000A breaking capacity. With a body length of 10.2mm and height of 38mm, it is used for electric circuit protection in inline/holder mounting applications at up to 250V DC.
PTS120660V010
Eaton Corporation
Eaton Corporation's PTS120660V010 is a 1206-sized electric fuse with a rated voltage of 60V and a rated current of 0.1A. It has a fast blow characteristic and is suitable for surface mount applications.
ATDR25
The Mersen S A ATDR25 fuse is a 25A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200000A.
KTK-R-2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
KTK-R-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 20 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
LP-CC-25
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
FWH-30A14F
The Eaton Corporation FWH-30A14F fuse, rated at 30A and 500V AC/DC, offers a high breaking capacity of 200kA. With a compact body size of 14.3mm x 50.8mm, it is ideal for electric circuit protection in various applications requiring reliable performance and compliance with CE, CSA, and UL standards.
JJS-60
The Eaton Corporation JJS-60 fuse, rated at 600V and 60A with a very fast blow characteristic, is ideal for electric circuit protection. With a compact body size of 20.6mm x 39.7mm and mounting feature for inline/holder use, it meets CE, CSA, and UL standards.
ATM15
The Mersen S A ATM15 fuse is a 15A fast blow electric fuse with 600V AC/DC rated voltage and 100kA breaking capacity. It comes in midget size, 10mm x 38mm dimensions, suitable for inline mounting applications. Compliant with CSA and UL standards, it is commonly used for circuit protection in various industrial equipment.
LP-CC-12
Eaton Corporation's LP-CC-12 fuse, rated at 12A and 600V AC/150V DC, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm and end cap terminals, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
SF-1206S050-2
SF-1206S050-2 by Bourns is a 1206 size surface mount fuse with a rated current of 0.5A and max operating temperature of 105°C. It is commonly used for circuit protection in electronic devices.
0453003MR
Littelfuse
Littelfuse 0453003MR NANO fuse with 3A current rating, 125V AC/DC voltage, and 1.65J joule integral. Ideal for circuit protection in electronics, featuring very fast blow characteristic and surface mounting feature.
FNQ-R-2
The Eaton Corporation FNQ-R-2 fuse is a 2A, 600V time delay CC class fuse with a rated breaking capacity of 200kA. It has nickel terminal finish and dimensions of 10.3mm x 38.1mm, suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, it comes in BOX packing method for easy installation.
ATM-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
FWP-10A14FI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 10 A; Terminal Shape: END CAP;
LPJ-70SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
FNQ-R-2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
170M1565
The Eaton Corporation 170M1565 fuse has a rated current of 63A and a nominal joule integral of 215J, suitable for circuit protection in applications requiring a rated breaking capacity of 200kA. With dimensions of 54mm x 21mm x 35mm, it is designed for use with AC/DC voltages up to 690V and features built-in indicator and tab/blade terminals.
BK/ATM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
LKN-100
ELECTRIC FUSE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
157.5701.6301
Littelfuse 157.5701.6301 fuse has a trip time of 0.2s, rated current of 300A, and rated voltage of 48V. It is used for circuit protection in applications requiring a compact size and high breaking capacity.
157.5701.6201
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1200 A;
157.5917.6201
The Littelfuse 157.5917.6201 fuse has a trip time of 0.2s, rated current of 200A, and rated voltage of 48V. It is used for circuit protection in applications requiring a high breaking capacity and operates within a temperature range of -40°C to 125°C.
157.5917.6331
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 325 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1950 A;
157.5700.6141
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 135 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 82 mm;
157.5700.6301
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 300 A; Terminal Shape: TAB/BLADE; Body Height: .8 mm;
157.5700.6401
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 82 mm;
157.5700.5401
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 82 mm;
157.5700.5801
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 82 mm;
157.5700.6161
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE; Packing Method: BULK;
157.5700.6271
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 275 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
157.5700.6131
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 130 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 780 A;
157.5700.6331
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 325 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 82 mm;
157.5700.5631
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE; Body Height: .6 mm;
157.5700.6171
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1050 A;
157.5700.6101
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 600 A;
157.5700.6201
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Body Height: .8 mm;
157.5700.6231
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 225 A; Terminal Shape: TAB/BLADE; Trip Time/Delay: .2 Seconds;
157.5700.6151
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved