Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
142.5631.6152 fuse by Littelfuse is a 150A electric fuse with a rated voltage of 58V and trip time of 0.1s, suitable for circuit protection applications. It has a nominal joule integral of 83400J, dimensions of 12mm x 7.8mm x 16mm, and operates within temperatures ranging from -40°C to 125°C.
Median Price
$3.190
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Newark
1+ parts
$1.440
100+ parts
1k+ parts
10k+ parts
-
Arrow
$1.781
Chip1Stop
$1.890
Farnell
$2.550
$2.140
$1.720
Mouser Electronics
$4.430
$2.330
$2.120
RS (Exports)
$4.540
$4.130
DigiKey
$4.700
$2.749
$2.124
Element14
$6.190
$3.750
$3.340
$2.920
Verical
TTI
Master Electronics
$1.430
$1.390
$1.360
Nova Conductors
$1.600
Maritex
$3.202
$2.062
Cyclops Electronics Ltd
Vyrian
VNN
NAC Semi
$2.890
IBS Electronics
$2.353
$2.314
Component Stockers USA
$0.710
$1.580
Ampacity Inc.
$1.110
Semicontronic
$1.220
$1.190
$1.183
Argo Parts USA
Netroflash
$1.520
$1.488
Corohmni
$1.826
Continental Prestige Electronics
$3.310
$2.060
$1.530
Aztec Data Supply Inc.
$4.410
Authorized Procurement Solutions
Perfect Parts
High joule rating ensures effective protection against power surges and overloads, making it a reliable choice for equipment safety.
Quick trip time ensures rapid response to faults, helping to prevent damage to connected devices or circuits.
High rated current capacity allows for safe operation of devices drawing up to 150 amps without risking overheating or failure.
Designed for use in circuits with a rated voltage of 58 volts, ensuring compatibility and effective protection within this range.
Wide operating temperature range allows for reliable performance in a variety of environmental conditions, enhancing versatility.
Versatile mounting options provide flexibility in installation, making it suitable for a range of applications and configurations.
Fuses 142.5631.6152 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Body Width:
Dimensions:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
142.5631.6152 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Vishay Semiconductors
Rectron
Excel (Suzhou) Semiconductor
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LPJ-70SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
FNQ-R-30
Eaton Corporation
Eaton Corporation's FNQ-R-30 fuse, rated at 30A and 600V AC/300V DC, features a time delay blow characteristic. With a CC class and nickel terminal finish, it offers a high breaking capacity of 200kA. Ideal for electric circuit protection in various applications with CE, CSA, and UL standards compliance.
0452002.MRL
Littelfuse
Littelfuse 0452002.MRL NANO fuse with 125V AC/DC, 2A rated current and slow blow characteristic. Ideal for circuit protection in electronics, featuring WRAPAROUND terminals and CSA/CUL/UL standards compliance. Dimensions: 6.1mm x 2.69mm x 2.69mm, operating temp -55 to 125 °C.
S-3/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: .3 A; Reference Standard: CE; CSA; UL; Manufacturer Series: S;
39211000440
Littelfuse 39211000440 TE5 fuse with 1A current rating, 250V voltage, and 8J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 35A. Dimensions of 8.5mm x 4mm x 8mm make it suitable for through-hole mounting in various electronic devices.
FWP-600A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE;
02170.05MXP
Littelfuse 02170.05MXP fuse, rated at 0.05A and 250V, with fast blow characteristic and trip time of 0.003s. Ideal for circuit protection in applications requiring a 5x20mm size fuse with rated breaking capacity of 35A. Operating temperature range from -55 to 125°C makes it suitable for various electronic devices.
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
0453001.MR
Littelfuse 0453001.MR NANO fuse, rated 1A at 125V AC/DC, with 0.6029J joule integral and 5s trip time. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm. Compliant with CE, CSA, CUL, PSE, TUV, UL standards for various applications.
0251001.NRT1L
Littelfuse 0251001.NRT1L PICO fuse, rated at 125V/1A with 0.004s trip time. Very fast blow characteristic, suitable for electric circuit protection. Dimensions of 2.8mm x 7.11mm make it ideal for through-hole mounting in various applications.
BK/AGC-10-R
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
FNQ-R-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
BK/ATM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Blow Characteristic: FAST;
LP-CC-1-1/2
LP-CC-1-1/2 by Eaton Corp is a 1.5A time delay electric fuse with 600V AC and 300V DC ratings. Measuring 10x38.1mm, it features an end cap terminal shape and inline mounting, suitable for circuit protection in various applications meeting CE, CSA, UL standards.
JJS-40
The Eaton Corporation JJS-40 fuse, with a rated current of 40A and very fast blow characteristic, is ideal for circuit protection in applications requiring a 600V AC voltage. Measuring 20.6mm x 39.7mm, it features an end cap terminal shape and inline/holder mounting feature, meeting CE, CSA, and UL standards for reliable performance with a high breaking capacity of 200kA.
FNQ-R-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
FWP-400A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
KTK-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3 A; Terminal Shape: END CAP; Manufacturer Series: KTK;
ATC-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE;
LPJ-150SP
Eaton Corporation's LPJ-150SP fuse, rated at 150A and 600V AC/DC, features a J class with time delay blow characteristic. Measuring 41.4mm x 76.2mm, it is designed for electric circuit protection in various applications, meeting CE, CSA, and UL standards. Suitable for inline mounting with TAB/BLADE terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142.5631.6122
Littelfuse 142.5631.6122 fuse has a rated current of 125A and nominal joule integral of 62500J, suitable for circuit protection with a rated voltage of 58V. Its compact dimensions (12mm x 7.8mm x 16mm) make it ideal for inline mounting applications in various electronic devices.
142.5395.6152
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE; Body Height: 9.3 mm;
142.5631.5402
The Littelfuse 142.5631.5402 fuse has a rated current of 40A and nominal joule integral of 6800J, suitable for circuit protection with a rated voltage of 58V. With dimensions of 12mm x 7.8mm x 16mm, it is commonly used in applications requiring electric fuse protection at temperatures ranging from -40°C to 125°C.
142.5395.6202
Littelfuse 142.5395.6202 fuse has a Nominal Joule Integral of 288000 J, Trip Time of 0.1s, and Rated Voltage of 58V. It is used for circuit protection in applications requiring a slow blow characteristic with rated current up to 200A and max operating temperature of 125°C.
142.5631.5502
The Littelfuse 142.5631.5502 fuse has a rated current of 50A and nominal joule integral of 6900J, suitable for circuit protection with a rated voltage of 58V. With dimensions of 12mm x 7.8mm x 16mm, it is commonly used in applications requiring electric fuse protection at temperatures ranging from -40°C to 125°C.
142.5631.5802
The Littelfuse 142.5631.5802 fuse has a rated voltage of 58V and nominal joule integral of 25600J, suitable for circuit protection in various applications. With a rated current of 80A and dimensions of 12mm x 7.8mm x 16mm, it offers reliable performance with a max operating temperature of 125°C and min operating temperature of -40°C.
142.5631.6102
The Littelfuse 142.5631.6102 fuse has a rated voltage of 58V and nominal joule integral of 42500J, suitable for circuit protection in various applications. With a rated current of 100A and dimensions of 12mm x 7.8mm x 16mm, it offers reliable performance with a max operating temperature of 125°C and min operating temperature of -40°C. Its terminal shape is TAB/BLADE, making it easy to install in INLINE/HOLDER mounting features according to UL standards.
142.5395.6102
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 29 mm;
142.5395.6122
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Body Height: 9.3 mm;
142.5395.6172
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 154400 J;
142.5395.6222
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 225 A; Terminal Shape: TAB/BLADE; Maximum Operating Temperature: 125 Cel;
142.5395.6252
The Littelfuse 142.5395.6252 fuse has a rated current of 250A, trip time of 0.1s, and nominal joule integral of 292500J. It is used for circuit protection in applications requiring a slow blow characteristic with a rated voltage of 58V and dimensions of 29mm x 18.8mm x 9.3mm.
142.5395.6302
Littelfuse 142.5395.6302 fuse with 486000J joule integral, 0.1s trip time, and 29mm body length is ideal for electric circuit protection at 58V rated voltage and 300A current. Its slow blow characteristic ensures reliable performance in applications requiring a max operating temperature of 125°C and UL reference standard compliance.
142.5631.5302
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Body Width: 12 inch;
142.5631.5602
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 60 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 16 mm;
142.5631.5702
142.5631.5702 fuse by Littelfuse is a 70A electric fuse with a rated voltage of 58V and dimensions of 12mm x 7.8mm x 16mm. It has a nominal joule integral of 22000J, making it suitable for circuit protection in various applications requiring a max operating temperature of 125°C and min operating temperature of -40°C.
142.5631.6202
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 58 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1000 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved