Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0313002.HXP fuse, rated at 2A and 250V, offers a time lag blow characteristic with a trip delay of 14400s. With a nominal joule integral of 77J, it provides supplemental circuit protection in applications requiring an electric fuse with CE, CSA, PSE, and UL certifications.
Median Price
$0.964
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Arrow
1+ parts
$0.146
100+ parts
$0.145
1k+ parts
-
10k+ parts
Chip1Stop
$0.746
$0.462
$0.408
$0.394
Distrelec
$0.990
RS Americas
$1.270
$1.020
DigiKey
$1.510
$0.886
$0.676
$0.611
Newark
$0.950
$0.762
Mouser Electronics
$0.841
$0.699
TTI
$0.422
$0.398
$0.390
Farnell
$0.571
$0.514
RS (Exports)
$0.939
$0.753
Verical
$0.783
$0.531
Element14
$77.520
$46.920
Freelance Electronics
$0.472
$0.495
$0.467
Nova Conductors
$0.562
TME
$1.210
$0.415
Forefront Electronics and Design
$7.350
VNN
Vyrian
Midan Electronics
$0.530
Bristol Electronics
Bisco
IBS Electronics
$0.480
$0.364
$0.458
NAC Semi
$0.733
ACDS - Activité Composants Distribution Service
Inventory MP
Prism Electronics
Semi Source
Ampacity Inc.
$0.116
Argo Parts USA
$0.548
$0.532
CoreStaff
$0.697
$0.317
$0.270
Corohmni
$3.235
Aztec Data Supply Inc.
$6.240
Perfect Parts
Glotronic Ltd.
Continental Prestige Electronics
$0.632
GreenTree Electronics
Netroflash
$0.551
$0.534
$0.523
Authorized Procurement Solutions
Speed Components Ltd (Excess)
High joule rating provides excellent protection against power surges and overloads, ensuring the safety of the connected electronics.
Long trip time/delay allows for temporary overloads to pass without tripping the fuse, reducing nuisance tripping.
Suitable for low current applications, providing precise protection against overcurrent situations.
Time lag characteristic helps in handling temporary overloads in the circuit, reducing the risk of unnecessary interruptions.
Inline or holder mounting options offer flexibility in installation and replacement of the fuse as needed.
Fuses 0313002.HXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Fuse Class:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0313002.HXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Bytesonic Electronics
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
1552200168
Molex
WIRE AND CABLE;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LPJ-400SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
ATDR2-1/4
Mersen S A
ATDR2-1/4 by Mersen S A is a 2.25A time delay fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it offers a high breaking capacity of 200kA. Ideal for electric circuit protection in various applications like inline mounting or holders, meeting CSA and UL standards.
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
3413.0331.22
Schurter Ag
Schurter Ag's 3413.0331.22 fuse is a 3.2x1.6mm TIME LAG electric fuse with a rated current of 20A and rated DC voltage of 63V, suitable for circuit protection in applications requiring a max operating temperature of 90°C.
0297005.L
Littelfuse
0297005.L by Littelfuse is a MINI fuse with 5A rated current, 32V DC voltage, and 37J nominal joule integral. It has a trip time of 0.03s and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and pre-arcing rating of 25 A2/s.
JJS-500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Manufacturer Series: JJS;
0468001.NRHF
Littelfuse 0468001.NRHF fuse, rated at 1A and 63V, features a trip time of 0.0015s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring a time delay blow characteristic. Compliant with CSA, CUL, and UL standards, it offers a max operating temperature of 90°C and matte tin terminal finish for surface mount installation.
3413.0330.22
Schurter Ag's 3413.0330.22 fuse, rated at 15A and 32V, features a time lag blow characteristic with dimensions of 3.2x1.6x0.6mm. Ideal for circuit protection in applications requiring a surface mount fuse with a pre arcing rating of 65 A2/s and UL/CUL reference standard compliance.
KTK-R-1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
FWP-25A14F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 25 A; Terminal Shape: END CAP;
0ACJ-1250-TE
Bel Fuse
Bel Fuse 0ACJ-1250-TE is a 1.25A electric fuse with 350V AC and 600V DC ratings. It offers 0.95J nominal joule integral, 120s trip time delay, and WRAPAROUND terminals. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and high breaking capacity of 100A.
0287005.L
Littelfuse 0287005.L fuse has a Nominal Joule Integral of 26 J, Trip Time of 0.08 sec, and Rated Current of 5 A. It is used for circuit protection in applications requiring a rated DC voltage of 32 V, with dimensions of 19.1mm x 5.1mm x 12.3mm and terminal shape TAB/BLADE.
ATDR5-6/10
ATDR5-6/10 by Mersen S A is a 5.6A time delay electric fuse with 600V AC and 300V DC ratings. Featuring a 10.4mm x 38.1mm body, it has a high breaking capacity of 200kA. Ideal for inline mounting, it meets CSA and UL standards for circuit protection applications.
KTK-15
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
LP-CC-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
0215016.MXEP
Littelfuse 0215016.MXEP fuse, rated at 16A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 5x20mm, it has a pre arcing rating of 1408 A2/s and meets IEC, PSE, and UL standards.
37011000410
Littelfuse 37011000410 fuse has a rated current of 1A and nominal joule integral of 0.2J. With a trip time of 0.02s, it is ideal for circuit protection in applications requiring fast blow characteristic at 250V AC voltage.
0251001.MXL
Littelfuse 0251001.MXL PICO fuse, rated 125V, 1A with 0.256J joule integral. Very fast blow characteristic in a compact size of 2.8mm x 7.11mm for supplemental circuit protection applications. Operating temperature range -55 to 125 °C, suitable for electric fuse requirements in various industries.
KTK-R-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Packing Method: BOX;
KTK-R-1-1/2
Eaton Corporation
Eaton Corporation's KTK-R-1-1/2 fuse, rated at 1.5A and 600V, features fast blow characteristic with a body size of 10.3mm x 38.1mm. It is a CC class electric fuse with nickel terminal finish, suitable for inline mounting applications with a high breaking capacity of 200000A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3SB2-R
0313.600MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .6 A; Terminal Shape: END CAP; Packing Method: BULK;
0313.600HXP
The Littelfuse 0313.600HXP is a 3AG fuse with a rated current of 0.6 A and a max operating temperature of 125°C. It has a time lag blow characteristic and is commonly used for circuit protection in applications such as inline holders.
0313003.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0313002.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BULK;
031302.5HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
031302.5MXP
031302.5MXP by Littelfuse is a 2.5A, 250V time lag fuse with a rated breaking capacity of 100A. It has a nominal joule integral of 199J and trip time of 5s, suitable for electric fuse circuit protection applications. This fuse features nickel terminal finish, CE/CSA/KC/PSE/UL standards compliance, and operates within -60 to 125°C temperature range.
0313025.HXP
Littelfuse 0313025.HXP fuse, rated 25A and 32V, features time lag blow characteristic. With dimensions of 6.35mm x 31.75mm, it's ideal for electric circuit protection in applications requiring a rated breaking capacity of 300A and pre-arcing rating of 16500 A2/s.
0313025.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
0313003.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
0313005.HXP
Littelfuse 0313005.HXP fuse, rated at 5A and 250V, with a trip time of 5s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 6.35mm x 31.75mm, it has a pre-arcing rating of 140 A2/s and is compatible with CE, CSA, KTL, PSE, and UL standards.
0313.010MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .01 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
0313001.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; PSE; UL;
0313010.MXP
0313010.MXP fuse by Littelfuse is a 10A, 250V electric fuse with a time lag blow characteristic. It has a rated breaking capacity of 200A and nominal joule integral of 1285J. Ideal for circuit protection in applications requiring supplemental fuses with inline mounting features.
031302.5VXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0313025.VXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0313001.MXP
Littelfuse 0313001.MXP fuse, rated at 1A and 250V, with a trip time of 5s. Ideal for circuit protection in applications requiring a supplemental electric fuse with a blow characteristic of time lag. Measuring 6.35mm x 31.75mm, it has a pre-arcing rating of 14 A2/s and is compatible with CE, CSA, PSE, and UL standards.
0313.010HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .01 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
0313010.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 760 J;
0313005.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0313.250MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved