Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0215.500HXP fuse, rated at 0.5A and 250V, features a time lag blow characteristic with trip delay of 0.005s. With a nominal joule integral of 0.42J, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with standards such as CCC, CE, CSA, CUL, SEMKO, SEV, UL, and VDE.
Median Price
$1.780
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$0.561
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$0.890
$0.856
$0.854
$0.851
RS Americas
$1.420
RS (Exports)
$2.020
$1.610
Distrelec
$2.155
$1.429
$1.180
Element14
$2.350
$1.560
$1.230
Mouser Electronics
$2.420
$1.410
Future Electronics
$0.430
$0.410
$0.365
Verical
$0.762
Component Electronics Inc.
$1.920
$1.440
$1.250
IBS Electronics
$0.481
$0.468
$0.442
Continental Prestige Electronics
$1.570
$0.950
$0.713
Allen Electronics Distributors
$1.940
$1.550
Kepictronics
Glotronic Ltd.
Northwest PG Solutions
Perfect Parts
Native Components
This high joule integral value ensures efficient protection against power surges and overloads, making it a reliable choice for electronic devices.
Suitable for use in standard AC voltage applications, providing consistent and reliable performance.
With a fast trip time/delay, this fuse quickly disconnects the circuit in case of a fault, helping prevent damage to connected equipment.
Compact size allows for easy installation in various devices and equipment.
Designed to handle currents up to 0.5 A, suitable for low-power devices and circuits.
Can operate efficiently at high temperatures without compromising performance, ensuring reliability in diverse environments.
Specifically designed for circuit protection, offering a crucial safeguard against overcurrent situations.
Versatile mounting options provide flexibility in installation, making it easier to integrate into different systems.
Fuses 0215.500HXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0215.500HXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Cheng-yi Electronic
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Temic Semiconductors
Formosa Microsemi
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BK/AGC-10-R
Cooper Industries
BK/AGC-10-R by Cooper Industries is a 10A fast blow electric fuse with rated voltage of 250V AC. It has a nominal joule integral of 0.492J and dimensions of 6.35mm x 31.75mm, suitable for inline mounting applications in circuit protection systems.
045801.5DR
Littelfuse
Littelfuse 045801.5DR NANO fuse with 1.5A current rating, 75V DC voltage, and 0.548J joule integral. Ideal for circuit protection in applications requiring a rated AC voltage of 48V, such as automotive electronics and industrial equipment. Dimensions: 3.175mm x 1.575mm x 1.575mm, surface mountable with gold terminal finish for reliable performance in temperatures ranging from -55°C to 125°C.
0218016.MXP
0218016.MXP by Littelfuse is a 5x20mm electric fuse with a rated current of 16A and a trip time of 0.02s. It has a max operating temperature of 125°C and is commonly used for circuit protection in various applications.
0215020.MXP
0215020.MXP by Littelfuse is a 20 A fuse with 2600 J nominal joule integral and 0.01s trip time. Ideal for circuit protection in applications requiring a 250 V rated AC/DC voltage, such as inline mounting in electronic devices.
0217002.MXP
0217002.MXP by Littelfuse is a 5x20mm fuse with rated current of 2A and rated voltage of 250V. With very fast blow characteristic, it offers circuit protection for applications requiring a max operating temperature of 125°C. Suitable for use in various industries, complies with standards such as CCC, CE, CSA, IEC, UL.
80ET
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 350 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
ATM-20
Cooper Electronic Technologies
ATM-20 by Cooper Electronic Technologies is a 20A fast-blow electric fuse with a rated DC voltage of 32V. It has a compact body size of 10.92mm x 3.81mm x 8.81mm and features a tab/blade terminal shape. The fuse has a high breaking capacity of 1000A and can be mounted inline or in a holder. Its primary application is circuit protection in various electronic devices.
0217002.HXP
0217002.HXP fuse by Littelfuse is a 5x20mm electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a very fast blow characteristic and is commonly used for circuit protection in applications such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, SEV, UL, and VDE standards.
0157002.DRT
Littelfuse 0157002.DRT NANO fuse with 8.2J joule integral, 125V AC voltage, and 0.1s trip time. Ideal for circuit protection in electronics with WRAPAROUND terminals and TIME LAG blow characteristic. Rated at 2A current, it offers a compact size of 6.1mm x 2.69mm x 2.69mm for surface mount applications.
JJS-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
KRP-C-800SP
Eaton Corporation
Eaton Corporation's KRP-C-800SP fuse, rated at 800A and 600V AC/DC, features a time delay blow characteristic. With dimensions of 61mm x 95.3mm and a L-class fuse type, it is suitable for inline mounting applications requiring electric circuit protection. This silver terminal finish fuse has a high breaking capacity of 300kA and complies with CE, CSA, and UL standards.
0466001.NRHF
0466001.NRHF by Littelfuse is a 1206 size fuse with 63V rated voltage and 1A current. It offers fast blow characteristic, 0.0423J joule integral, and 0.2s trip time. Ideal for circuit protection in electronics with surface mounting feature.
0298450ZXH
Littelfuse 0298450ZXH is a bulk fuse with dimensions of 29.21mm x 19.05mm x 10.67mm, rated for 450A current and 32V DC voltage. It has a silver terminal finish, TAB/BLADE shape, and is used for electric circuit protection in applications requiring a max operating temperature of 125°C and min of -40°C.
0466002.NR
Littelfuse 0466002.NR fuse, rated at 2A and 63V, offers very fast blow characteristic with 0.2326J nominal joule integral. Ideal for circuit protection in electronics, it has a compact size of 1206 (3.18mm x 1.52mm x 0.58mm) and matte tin over nickel terminal finish for surface mount applications.
FNQ-R-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 5 A; Terminal Shape: END CAP; Fuse Class: Supplemental;
0485001.DR
Littelfuse 0485001.DR is a NANO fuse with rated current of 1A and rated voltage of 250V, suitable for circuit protection in various applications. It has a fast blow characteristic, trip time of 60s, and nominal joule integral of 0.3044J. This surface mount fuse operates b/w -55°C to 125°C with a max breaking capacity of 100A.
0313025.MXP
Littelfuse 0313025.MXP fuse, rated at 25A and 250V, offers a time lag blow characteristic with a trip delay of 5s. With a nominal joule integral of 16500J, it is ideal for circuit protection in applications requiring supplemental fuses with a rated AC voltage of up to 32V.
ATQR2/10
Mersen S A
The Mersen S A ATQR2/10 fuse is a time-delay electric fuse with a rated current of 0.2A and voltage of 600V, suitable for inline mounting applications. It has a compact body size of 10.4mm x 38.1mm and meets CSA, CE, and UL standards, offering high breaking capacity of 200kA for circuit protection at up to 80°C temperature.
0215016.MXEP
Littelfuse 0215016.MXEP fuse, rated at 16A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 5x20mm, it has a pre arcing rating of 1408 A2/s and meets IEC, PSE, and UL standards.
0451.125MRL
Littelfuse 0451.125MRL is a NANO fuse with 0.125A rated current and 125V DC/AC voltage. It has a very fast blow characteristic, gold terminal finish, and CSA/UL reference standards. Ideal for electric circuit protection in applications requiring surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5HT500-R
Bel Fuse
021501.6MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: PIN WIRE;
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
0215002MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 20 A; Terminal Shape: END CAP;
02153.15MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP;
0215.315MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: END CAP;
021502.5MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: PIN WIRE;
0215010MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP;
0215010.MXP
Littelfuse 0215010.MXP fuse, rated 10A at 250V, offers time lag blow characteristic with trip delay of 0.01s. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a rated breaking capacity of 1500A. Operating temperature range from -55 to 125°C makes it suitable for various electronic devices.
021502.5MXP
021502.5MXP fuse by Littelfuse is a 2.5A, 250V time lag electric fuse with a trip delay of 0.01s. It has a rated breaking capacity of 1500A and dimensions of 5x20mm, suitable for inline mounting applications in circuits requiring protection against overcurrent situations.
0215025.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0215008MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 8 A; Terminal Shape: END CAP;
0215008.MXP
Littelfuse 0215008.MXP fuse, rated at 8A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is suitable for circuit protection in applications requiring a max operating temperature of 125°C. The fuse has a nominal joule integral of 209.88J and is compatible with various mounting options as per CE, CSA, IEC standards.
0215.500MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: END CAP;
0215.315HXP
Littelfuse 0215.315HXP fuse, rated at 0.315A and 250V, features a time lag blow characteristic with trip delay of 0.005s. With dimensions of 5x20mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
0215.315MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: PIN WIRE;
02153.15HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; JESD-609 Code: e3;
02153.15MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE;
0215001.MXP
Littelfuse 0215001.MXP fuse, rated at 1A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Compact size of 5x20mm makes it suitable for inline mounting in various electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved