Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0215.500MXP fuse, rated at 0.5A and 250V, features a time lag blow characteristic with trip time of 0.005s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a rated breaking capacity of 1500A and operating temperatures ranging from -55 to 125°C.
Median Price
$1.777
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.789
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$1.230
$1.147
$0.980
$0.813
Element14
$1.113
$0.885
$0.848
Mouser Electronics
$2.310
$1.360
$1.120
DigiKey
$1.355
$1.034
$0.976
Newark
$2.500
$1.550
$1.220
$1.160
Farnell
$10.330
$7.100
$5.180
$4.900
TTI
$1.560
Verical
$0.927
$0.922
Arrow
$0.434
$0.429
Master Electronics
$3.140
$1.480
Kempston Controls
$0.680
Nova Conductors
$0.757
IBS Electronics
$0.623
Vyrian
VNN
Pegasus Components GmbH
TME
$0.648
$0.398
ACDS - Activité Composants Distribution Service
NAC Semi
$0.343
LIBRA Elektronik GmbH
Speed Components Ltd
Semicontronic
$0.374
$0.365
$0.363
Ampacity Inc.
$0.495
Argo Parts USA
CoreStaff
$1.268
$0.528
$0.481
Continental Prestige Electronics
$0.928
$0.678
$0.583
Perfect Parts
Kepictronics
Netroflash
$0.742
$0.720
$0.704
Provides reliable protection by absorbing excess energy to prevent damage to the circuit.
Suitable for use in a wide range of AC voltage applications, increasing versatility.
Quick response time helps in preventing damage to the circuit by quickly disconnecting when a fault is detected.
Compact size makes it easy to install in various devices without taking up too much space.
Suitable for low power applications, providing precise protection without impacting the overall circuit.
Versatile mounting options make it easy to integrate into different types of circuits or devices.
Fuses 0215.500MXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0215.500MXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult DEV Design 09/SEP/2019
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Promax-johnton
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Plessey Semiconductors Discrete Components Div
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
ATQR2-1/4
Mersen S A
Mersen S A's ATQR2-1/4 fuse, rated at 2.25A and 600V AC, features time delay blow characteristic for circuit protection with a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is suitable for inline mounting applications in various industries meeting CSA, CE, and UL standards.
021801.6MXP
Littelfuse
The Littelfuse 021801.6MXP fuse is a 1.6A, 250V time lag electric fuse with a rated breaking capacity of 35A and trip time of 0.02s. It is commonly used for circuit protection in applications requiring supplemental fuses, such as inline mounting or holders. The fuse has dimensions of 5x20mm and meets standards like CCC, CE, CSA, UL, and VDE.
045201.5MRL
Littelfuse 045201.5MRL Nano Fuse with 1.5A current, 125V AC/DC voltage rating, and slow blow characteristic. Ideal for circuit protection in electronics with surface mounting feature and gold terminal finish.
0313025.MXP
Littelfuse 0313025.MXP fuse, rated at 25A and 250V, offers a time lag blow characteristic with a trip delay of 5s. With a nominal joule integral of 16500J, it is ideal for circuit protection in applications requiring supplemental fuses with a rated AC voltage of up to 32V.
0218016.HXP
Littelfuse 0218016.HXP fuse has 1955J Joule Integral, rated 250V AC voltage, and 16A current. With time lag blow characteristic, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
BK/ATM-15
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
04511.25MRL
04511.25MRL by Littelfuse is a NANO fuse with 1.25A rated current and 125V rated voltage. It has a very fast blow characteristic, 0.664J nominal joule integral, and trip time of 5 seconds. Ideal for circuit protection in applications requiring surface mount fuses with WRAPAROUND terminals.
0251.062HAT1L
Littelfuse 0251.062HAT1L PICO fuse with 0.062A rated current, 125V AC/DC voltage, and very fast blow characteristic. Ideal for electric circuit protection in applications requiring a compact size fuse with through-hole mounting. Meets CSA, QPL, and UL standards for reliable performance.
0297004.WXNV
Littelfuse 0297004.WXNV is a MINI fuse with 4A rated current, 31J nominal joule integral, and 0.03s trip time. It is used for circuit protection in applications requiring a 32V rated voltage, such as automotive electronics and power distribution systems.
BK/ATM-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
0297003.WXNV
Littelfuse 0297003.WXNV is a MINI fuse with 3A current rating, 32V DC voltage, and 20J nominal joule integral. It has a 0.03s trip time and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and UL reference standard compliance.
0297010WXNV
Littelfuse 0297010WXNV fuse has 93J nominal joule integral, 10A rated current, and 32V DC voltage. With dimensions of 10.9mm x 3.8mm x 8.8mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C and min of -40°C.
KTK-R-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
0215002MXP
Littelfuse 0215002MXP fuse with 2A current, 250V voltage rating, and 11.68J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1500A. Dimensions of 5x20mm with nickel terminal finish for inline mounting.
ANL-80
Eaton Corporation
ANL-80 by Eaton Corporation is an 81mm x 22.2mm electric fuse with a rated current of 80A and a blow characteristic of time delay. It is commonly used for circuit protection in applications requiring a rated breaking capacity of 2700A and a rated DC voltage of 80V.
0451.062MRL
0451.062MRL by Littelfuse is a NANO fuse with 0.062A rated current and 125V DC voltage. It has a very fast blow characteristic, suitable for electric circuit protection in applications requiring surface mounting feature.
0453005.MR
Littelfuse 0453005.MR fuse, rated at 5A and 125V, offers very fast blow characteristic with a trip time of 5s. Ideal for circuit protection in applications requiring a nano-sized fuse with surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, and UL standards.
0299060ZXNV
Littelfuse 0299060ZXNV fuse with 60A rated current, 15300J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring a fuse with dimensions of 29.21mm x 8.85mm x 21.59mm and silver terminal finish. Operating temperature range from -40°C to 125°C makes it suitable for various electronic devices.
7012540.5IP
Siba
The Siba 7012540.5IP fuse has a rated current of 5A and nominal joule integral of 10J, with dimensions of 6.35mm x 31.8mm. It is designed for very fast blow characteristic circuit protection at rated AC voltage of 600V and DC voltage of 500V, suitable for inline mounting applications in bulk packaging.
LPJ-400SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5HT500-R
Bel Fuse
0215016.MXEP
Littelfuse 0215016.MXEP fuse, rated at 16A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 5x20mm, it has a pre arcing rating of 1408 A2/s and meets IEC, PSE, and UL standards.
021501.6MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: PIN WIRE;
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
0215020.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 20 A; Terminal Shape: END CAP;
02153.15MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP;
0215.315MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: END CAP;
021502.5MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: PIN WIRE;
0215010MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP;
0215010.MXP
Littelfuse 0215010.MXP fuse, rated 10A at 250V, offers time lag blow characteristic with trip delay of 0.01s. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a rated breaking capacity of 1500A. Operating temperature range from -55 to 125°C makes it suitable for various electronic devices.
021502.5MXP
021502.5MXP fuse by Littelfuse is a 2.5A, 250V time lag electric fuse with a trip delay of 0.01s. It has a rated breaking capacity of 1500A and dimensions of 5x20mm, suitable for inline mounting applications in circuits requiring protection against overcurrent situations.
0215025.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0215008MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 8 A; Terminal Shape: END CAP;
0215008.MXP
Littelfuse 0215008.MXP fuse, rated at 8A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is suitable for circuit protection in applications requiring a max operating temperature of 125°C. The fuse has a nominal joule integral of 209.88J and is compatible with various mounting options as per CE, CSA, IEC standards.
0215.315HXP
Littelfuse 0215.315HXP fuse, rated at 0.315A and 250V, features a time lag blow characteristic with trip delay of 0.005s. With dimensions of 5x20mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
0215.315MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: PIN WIRE;
02153.15HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; JESD-609 Code: e3;
02153.15MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE;
0215001.MXP
Littelfuse 0215001.MXP fuse, rated at 1A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Compact size of 5x20mm makes it suitable for inline mounting in various electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved