Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0157005.DRT by Littelfuse is a NANO fuse with 5A rated current, 125V AC/DC voltage, and 53.72J nominal joule integral. It has a time lag blow characteristic and trip time of 0.1s, suitable for electric circuit protection in various applications due to its compact size and surface mounting feature.
Median Price
$2.033
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.690
100+ parts
$1.630
1k+ parts
$1.620
10k+ parts
$1.430
Arrow
$1.775
$1.693
$1.611
-
Distrelec
$3.272
$2.503
Mouser Electronics
$4.940
$2.890
$2.040
$2.030
Newark
$5.790
$3.610
$3.080
DigiKey
Farnell
$1.870
$1.610
$1.510
Element14
$3.300
$3.010
$2.920
Verical
Nova Conductors
$1.770
Atlantic Semiconductor
Rutronik
$2.210
Vyrian
VNN
Sensible Micro Corp
A2Z Electronics, Inc.
Bristol Electronics
Ampacity Inc.
Argo Parts USA
Netroflash
$1.735
Component Stockers USA
$2.100
$1.720
$1.530
$1.470
Authorized Procurement Solutions
Perfect Parts
Glotronic Ltd.
GreenTree Electronics
Continental Prestige Electronics
$1.520
Kepictronics
This high Joule rating ensures that the fuse can handle a large amount of energy, providing reliable protection for your circuit.
Suitable for use with standard AC voltage levels, ensuring compatibility with most electrical systems.
The quick trip time helps to swiftly interrupt the circuit in case of a fault, minimizing potential damage.
Compact size allows for easy installation in tight spaces or on small circuit boards.
Suitable for low to medium current applications, making it versatile for a range of electrical setups.
Can withstand high temperatures, ensuring reliability even in demanding environments.
The time lag characteristic provides extra protection against temporary surges in current, reducing the risk of false blows.
Surface mount design makes installation quick and easy, ideal for modern circuit board layouts.
Fuses 0157005.DRT attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0157005.DRT Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
FDLL4148
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
CM32FC
Eaton Corporation
ELECTRIC FUSE;
KTK-R-1
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
ATM5
Mersen S A
Mersen S A's ATM5 fuse, rated 5A and 600V, features fast blow characteristic with 100kA breaking capacity. It is a midget size fuse with end cap terminal shape for inline mounting applications in circuits requiring electric protection. Compliant with CSA and UL standards, it comes in bulk packaging for easy installation.
0456040.DRSDE
Littelfuse
Littelfuse 0456040.DRSDE NANO fuse with 40A rated current, 250V AC/DC voltage, and fast blow characteristic. Ideal for circuit protection in applications requiring a compact surface mount design with high breaking capacity of 150A.
0451010.MRL
0451010.MRL by Littelfuse is a NANO fuse with 10A rated current and 125V rated voltage. It has a very fast blow characteristic, 26.46J nominal joule integral, and trip time of 5s. Ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity.
37212500001
Littelfuse 37212500001 fuse has a rated current of 2.5A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With a blow characteristic of TIME LAG, it offers a rated breaking capacity of 35A and operates within -40 to 85°C temperature range.
0259001T
Littelfuse 0259001T fuse has a rated current of 1A and nominal joule integral of 0.01J. With a rated AC voltage of 125V, it is ideal for circuit protection in applications requiring electric fuses. This through-hole mounted fuse operates b/w -55°C to 90°C, with a rated breaking capacity of 50A.
0453001.MR
Littelfuse 0453001.MR NANO fuse, rated 1A at 125V AC/DC, with 0.6029J joule integral and 5s trip time. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm. Compliant with CE, CSA, CUL, PSE, TUV, UL standards for various applications.
0468002.NRHF
Littelfuse 0468002.NRHF fuse, rated 2A and 63V, with 0.506J nominal joule integral. Ideal for circuit protection in electronics due to time delay blow characteristic and compact 1206 size. Features WRAPAROUND terminals and matte tin finish for surface mount applications.
179020.1
Siba
Siba 179020.1 is a 5x20mm fuse with a rated current of 1A and rated voltage of 250V. It has a very fast blow characteristic and a nominal joule integral of 1.5J, making it suitable for circuit protection in various applications.
0218.063MXP
Littelfuse 0218.063MXP fuse, rated at 0.063A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C.
0297015WXNV
Littelfuse 0297015WXNV fuse with 270J joule integral, 15A rated current, and 32V DC voltage. Ideal for electric circuit protection in applications requiring inline mounting, such as automotive and industrial electronics. Operating temperatures range from -40°C to 125°C.
FNQ-R-5-6/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 5.6 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
25ET
25ET fuse by Eaton Corporation is a 25A electric fuse with a rated AC voltage of 690V and rated DC voltage of 350V. With a nominal joule integral of 25J and rated breaking capacity of 200kA, it is ideal for circuit protection in various applications. This fuse has dimensions of 48mm x 19.1mm and features TAB/BLADE terminals for easy installation in INLINE/HOLDER mounting setups.
FNQ-R-2-1/4
Eaton Corporation's FNQ-R-2-1/4 fuse, rated at 2.25A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200000A.
FNQ-R-4-1/2
Eaton Corporation's FNQ-R-4-1/2 fuse, rated at 4.5A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
AJT125N
AJT125N fuse by Mersen S A is a 125A, time delay electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. It features TAB/BLADE terminals, measures 41mm in diameter and 146mm in height, suitable for inline mounting applications. Compliant with CSA, IEC, and UL standards, it is ideal for circuit protection in systems up to 500V DC.
37011000000
Littelfuse 37011000000 fuse, rated at 1A and 250V, offers fast blow characteristic with trip time of 0.02s. Ideal for circuit protection in various applications with rated breaking capacity of 35A. Dimensions: 8.5mm x 8mm, suitable for THROUGH HOLE mounting method.
ATDR1/4
Mersen S A's ATDR1/4 fuse, rated 0.25A and 600V AC, features time delay blow characteristic. With a body size of 10.4mm x 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA such as inline mounting systems compliant with CSA and UL standards.
BK/ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Body Width: 3.81 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0157002DRT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0157002.DRT
Littelfuse 0157002.DRT NANO fuse with 8.2J joule integral, 125V AC voltage, and 0.1s trip time. Ideal for circuit protection in electronics with WRAPAROUND terminals and TIME LAG blow characteristic. Rated at 2A current, it offers a compact size of 6.1mm x 2.69mm x 2.69mm for surface mount applications.
0157010.DR
Littelfuse 0157010.DR Nano fuse with 10A current rating, 125V AC/DC voltage, and 26.46J joule integral. Ideal for circuit protection in electronics with very fast blow characteristic and UL reference standard compliance.
0157010DR
Littelfuse 0157010DR fuse has a rated current of 10A and nominal joule integral of 26.46J, suitable for circuit protection in applications requiring very fast blow characteristic at up to 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mounting method using matte tin terminal finish.
0157.200.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .2 A; Terminal Shape: WRAPAROUND;
0157.200DR
0157.750DRT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .75 A; Terminal Shape: WRAPAROUND;
0157.750.DRT
0157003.DRT
Littelfuse 0157003.DRT fuse has a rated current of 3A, trip time of 0.1s, and nominal joule integral of 20.16J. It is a NANO-sized electric fuse with time lag blow characteristic suitable for circuit protection in applications requiring a surface mounting feature.
0157003DRT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0157.125DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .125 A; Terminal Shape: WRAPAROUND;
0157.125.DR
0157.750.DR
0157.750DR
0157005DRT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
01571.25DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
0157.500.DRT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
0157.500DRT
0157005.DR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved