Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-4221NLC by Lite-on Technology is a 3mm diffused red LED with a peak wavelength of 635nm. It has a max forward current of 0.007A and a viewing angle of 60°. This LED is commonly used in applications such as indicator lights, displays, and signage.
Median Price
$0.123
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.300
100+ parts
$0.089
1k+ parts
$0.080
10k+ parts
$0.047
DigiKey
$0.420
$0.203
$0.153
$0.124
Chip1Stop
-
$0.066
$0.033
Verical
$0.081
Arrow
$0.156
$0.127
Future Electronics
$0.090
$0.084
Edge Electronics
IBS Electronics
$0.060
$0.252
$0.245
Nova Conductors
$0.125
EXC GmbH
$0.145
TME
$0.289
$0.069
$0.065
Rutronik
$0.053
$0.048
Schukat
$0.064
$0.032
$0.030
Chip Stock
Vyrian
NAC Semi
$0.189
R&J Components
LIBRA Elektronik GmbH
Resion
GES GmbH
Prism Electronics
ABC Electronics Ltd.
Semicontronic
$0.020
$0.019
Continental Prestige Electronics
$0.120
$0.118
Argo Parts USA
$0.116
Aranea Global
$0.122
Corohmni
$0.393
Aztec Data Supply Inc.
$0.530
Authorized Procurement Solutions
Perfect Parts
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Speed Components Ltd (Excess)
This product has a single configuration, allowing for a simple and straightforward installation process.
With its compact size, this LED is suitable for applications where space is limited.
With a single function, this LED is ideal for basic lighting or signaling purposes.
The low maximum forward current ensures energy efficiency and prevents excessive power consumption.
The specific wavelength of 635 nm guarantees a vibrant red color, making it suitable for visually appealing designs.
The diffused red lens disperses light evenly, providing a softer and more uniform illumination.
This LED is designed to emit a single color, allowing for consistent and precise lighting effects.
With only two terminals, connecting and installing this LED is convenient and hassle-free.
The T-1 T-code indicates the standardized size and shape of the LED, ensuring compatibility with various mounting options.
The high maximum operating temperature of 100°C ensures durability and reliability in demanding environments.
The moderate height makes this LED adaptable for various applications while maintaining a compact profile.
The round shape provides a classic and versatile design, suitable for a wide range of lighting projects.
With a low minimum operating temperature, this LED remains functional even in extremely cold conditions.
This LED emits a vibrant red color, enhancing visual appeal and creating attention-grabbing lighting displays.
The high efficiency of the red color ensures maximum brightness while minimizing power consumption, making it an energy-efficient choice.
The bulk packing method allows for cost-effective purchasing of multiple LEDs, ideal for large-scale projects or manufacturing.
The terminal pitch of 2.54 mm guarantees compatibility with standard electronic components and facilitates easy integration.
With a wide viewing angle of 60°, this LED provides a broad illumination range, suitable for applications requiring extensive coverage.
The nominal luminous intensity of 2.5 mcd ensures a bright output, making this LED visible even in well-lit environments.
The radial mounting feature allows for secure and stable installation, ensuring the LED stays in place during operation.
With a maximum forward voltage of 2.2 V, this LED operates efficiently and effectively at lower voltage levels, contributing to energy savings.
Visible LEDs LTL-4221NLC attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
T-code:
Terminal Pitch:
Viewing Angle:
LTL-4221NLC Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
HSMF-C162
Broadcom
HSMF-C162 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 595nm. With a viewing angle of 120°, it's ideal for surface mount applications requiring amber/orange-red light output. Operating temperatures range from -30 to 85 °C, making it suitable for various electronic devices.
KP-1608SGC
Kingbright Electronic
KP-1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
HLMP-3962
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Size: 5 mm; T-code: T-1 3/4;
5201
Microprecision Electronics Sa
DUAL COLOR LED;
597-6601-607F
Dialight
Dialight's 597-6601-607F LED has a peak wavelength of 468nm, max forward current of 0.02A, and water-clear lens. Ideal for applications requiring blue light emission with a viewing angle of 70°. Operating temp range from -55°C to 85°C makes it suitable for various lighting solutions.
LSQ976-Z
Osram Opto Semiconductors
LSQ976-Z by Osram Opto Semiconductors is a 1mm single color LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for applications requiring super red light emission in compact spaces.
5310F5
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: DIFFUSED; T-code: T-1;
598-8160-107F
Dialight's 598-8160-107F is a single color LED with a size of 1.2mm and max forward current of 0.025A. It operates b/w -30 to 85°C, emitting yellow-green light at a viewing angle of 140°. Ideal for surface mount applications requiring a compact, efficient lighting solution.
LGL29K-G2J1-24
Osram Opto Semiconductors' LGL29K-G2J1-24 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and viewing angle of 160°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 3.9mcd.
XHP35B-00-0000-0D0BD40E7
Wolfspeed
SINGLE COLOR LED;
HSMG-C170
HSMG-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With max forward current of 0.02A and viewing angle of 170°, it operates b/w -40 to 85 °C, making it suitable for surface mount configurations in various electronic devices.
HLMP-4740
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
550-2404F
Dialight's 550-2404F is a 5mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.02A and viewing angle of 50°. Ideal for applications requiring red light indication in electronic devices due to its compact size and high luminous intensity.
150080YS75000
Wuerth Elektronik & Kg
150080YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm, forward current of 0.03A, and luminous intensity of 120.0mcd. Ideal for surface mount applications in electronics, providing a viewing angle of 140° for efficient illumination in compact spaces.
598-8710-307F
Dialight's 598-8710-307F is a COMMON ANODE, 3 ELEMENTS LED with size 1.6mm and max forward current of 0.02A. Ideal for applications requiring TRIPLE COLOR illumination with RED/GREEN/BLUE colors, it operates b/w -40 to 100 °C and has a viewing angle of 140°.
LSQ976-NR-1
LSQ976-NR-1 by Osram Opto Semiconductors is a 1mm single color LED with peak wavelength of 645nm. It has a viewing angle of 160° and nominal luminous intensity of 104.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85 °C, making it suitable for various lighting solutions.
HLMP-1790-A00A1
Broadcom's HLMP-1790-A00A1 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a compact, low-power consumption light source.
QTLP650C24TR
Everlight Electronics
Visible LEDs; Lens Type: WATER CLEAR; Viewing Angle: 0 deg; Color At Wavelength: Green/Orange-Red; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
SML-D15MWT86
ROHM
ROHM's SML-D15MWT86 is a 1.2mm SINGLE COLOR LED with 0.035A max forward current and 71.0mcd nominal luminous intensity. Ideal for surface mount applications, it emits YELLOWISH GREEN light at -40 to 100°C, making it suitable for various visible LED lighting projects.
JE2835AWT-00-0000-000A0HG830E
Cree Led
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Shape: RECTANGULAR; Color: WARM WHITE; Maximum Operating Temperature: 105 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL42NKFD
Lite-on Technology
Visible LEDs;
LTL-4231NLC
LTL-4231NLC by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.007A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTL-4231N
LTL-4231N by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°, making it ideal for applications requiring green light emission in compact spaces. With a radial mount feature and matte tin terminal finish, this LED operates b/w -55°C to 100°C efficiently.
LTL4231N
Taiwan Liton Electronic C
LTL4231N by Taiwan Liton Electronic C is a green visible LED with a peak wavelength of 565nm and a max forward voltage of 2.8V. It has a diffused lens type and can operate in temperatures ranging from -55°C to 100°C. This LED is commonly used for various lighting applications due to its low power consumption and wide viewing angle of 60°.
LTL-4231N-022
LTL-4231N-022 by Lite-on Technology is a 3mm green LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices. Operating temperature range from -55 to 100°C makes it versatile for various environments.
LTL-4233
LTL-4233 by Lite-on Technology is a 5mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring diffused lighting, such as indicator lights in electronic devices. With a viewing angle of 36°, it offers a nominal luminous intensity of 19mcd for clear visibility.
LTL4233
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.8 V;
LTL-4231N-1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.6; Lens Type: DIFFUSED; Maximum Operating Temperature: 100 Cel;
LTL-4231NHBP
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Maximum Forward Current: .03 A;
LTL-4231NHCP
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Peak Wavelength (nm): 565;
LTL-4233-R1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-4233-R2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 29.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-4221N
LTL-4221N by Lite-on Technology is a 3mm diffused red LED with a peak wavelength of 635nm. It has a max forward current of 0.03A and a viewing angle of 60°. This LED is commonly used in applications such as indicator lights, displays, and signage.
LTL4221N
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7; Lens Type: DIFFUSED RED; Terminal Finish: Matte Tin (Sn);
LTL-4231N-002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Size: 3 mm;
LTL-4233-002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; No. of Functions: 1;
LTL-4233-012
LTL-4233-FL
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-4223
LTL-4223 by Lite-on Technology is a 5mm single color LED with a peak wavelength of 635nm. It has a max forward current of 0.03A and a viewing angle of 36°. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-4221NP6
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7; Lens Type: DIFFUSED RED; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved