Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-1CHYE by Lite-on Technology is a 3.1mm SINGLE COLOR LED with peak wavelength of 585nm and yellow color output. With max forward current of 0.02A, it offers a viewing angle of 45° suitable for applications requiring bright yellow illumination in compact spaces.
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.190
$0.086
$0.060
$0.045
DigiKey
$0.092
$0.067
$0.052
Verical
$0.058
$0.043
Chip1Stop
$0.081
Nova Conductors
Jameco Electronics
Schukat
$0.063
$0.030
$0.028
IBS Electronics
$0.055
$0.100
Vyrian
Prism Electronics
Corohmni
$0.034
Semicontronic
$0.049
$0.048
Aranea Global
$0.059
$0.057
Argo Parts USA
Continental Prestige Electronics
Aztec Data Supply Inc.
$0.220
Authorized Procurement Solutions
Perfect Parts
Kepictronics
Single configuration makes it easy to integrate into various electronic devices and circuits.
Compact size allows for flexibility in design and placement within products.
Low forward current requirement helps in energy efficiency and prolongs the lifespan of the LED.
Specific peak wavelength of 585 nm provides a consistent and bright yellow light output.
Transparent lens ensures maximum light transmission and brightness.
Simple 2-terminal design simplifies the connection process during installation.
High operating temperature range allows for use in a variety of environments without risking damage.
Optimal height for visibility and fitting into different product designs.
Round shape provides a wide viewing angle, making the LED suitable for various display applications.
Consistent yellow color output makes it ideal for applications requiring yellow light.
Bulk packaging allows for cost-effective purchasing in large quantities for manufacturing purposes.
Standard terminal pitch for easy integration into PCBs and other electronic circuits.
Wide 45° viewing angle ensures good visibility from different perspectives.
High luminous intensity of 40.0 mcd ensures a bright and visible light output.
Radial mount design allows for easy and secure mounting on PCBs or panels.
Low forward voltage requirement facilitates efficient operation and power consumption.
Visible LEDs LTL-1CHYE attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
T-code:
Terminal Pitch:
Viewing Angle:
LTL-1CHYE Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Microsemi
Frontier Electronics
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
SML-D12M8WT86CN
ROHM
Visible LEDs; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
597-7703-607F
Dialight
Dialight's 597-7703-607F is a dual-color LED with peak wavelengths of 639nm and 574nm. Featuring a water-clear lens, it has a viewing angle of 130° and nominal luminous intensity of 55/45 mcd. Ideal for surface mount applications, this LED has separate elements for red and green light emission, making it suitable for status indicators in various electronic devices.
HLMP-1503
Quality Technologies
SINGLE COLOR LED; Color: HIGH EFFICIENCY GREEN; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; T-code: T-1; No. of Functions: 1;
CLP6C-FKB-CM1Q1H1BB7R3R3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; No. of Functions: 1; Color: RED/GREEN/BLUE; T-code: T1-1/2;
150141RV73100
Wuerth Elektronik & Kg
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
LTV-356T-V
Lite-on Technology
SINGLE COLOR LED; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
KP-1608SURCK
Kingbright Electronic
Kingbright Electronic's KP-1608SURCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices due to its compact size and water clear lens type.
XHP35B-00-0000-0D0UB227G
SINGLE COLOR LED;
QTLP650C-2.TR
Fairchild Semiconductor
Fairchild Semiconductor's QTLP650C-2.TR is a 2mm single color LED with peak wavelength of 640nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens and nominal luminous intensity of 6mcd, making it suitable for various visible LED lighting projects.
LTST-C19HE1WT-H
Visible LEDs;
HSMH-C150
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Terminal Pitch: 2.7 mm;
SLR-56VR3F
ROHM's SLR-56VR3F is a 5mm single color LED with peak wavelength of 650nm. It has a max forward current of 0.02A and viewing angle of 40°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
TLMO1000-GS08
Vishay Intertechnology
TLMO1000-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 610nm and max forward current of 0.015A. Ideal for applications requiring soft orange light, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
XHP50B-00-0000-0D0BJ40E5
598-8710-307F
Dialight's 598-8710-307F is a COMMON ANODE, 3 ELEMENTS LED with size 1.6mm and max forward current of 0.02A. Ideal for applications requiring TRIPLE COLOR illumination with RED/GREEN/BLUE colors, it operates b/w -40 to 100 °C and has a viewing angle of 140°.
OVLAW4CB7
Tt Electronics Plc
OVLAW4CB7 by Tt Electronics Plc is a 3.05mm SINGLE COLOR LED with WATER CLEAR lens, WHITE color, and 3500.0mcd luminous intensity. It operates b/w -40 to 85°C, has a forward current of 0.02A, and a viewing angle of 45°. Ideal for applications requiring high brightness in compact spaces like indicator lights or displays.
HLMP-4740
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SSL-LX3044AD-12V
Lumex
SSL-LX3044AD-12V by Lumex is a 3mm single color LED with peak wavelength of 605nm and 15.0mcd luminous intensity. Ideal for applications requiring amber light, it has a diffused lens, operates at -40 to 85°C, and features radial mounting.
SSL-LX5093XUSBC
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
KP-2012SYC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL1BEKVJNN
LTL1BEKVJNN by Lite-on Technology is a 3mm dual color LED with a common cathode configuration. It has a peak wavelength of 639/575nm and a max forward current of 0.03A. This LED is commonly used in applications that require super red and green colors, such as signage or indicator lights.
LTL-1CHGE
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: TRANSPARENT; Maximum Operating Temperature: 100 Cel;
LTL-14CDJN
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7/12.6; Lens Type: DIFFUSED WHITE; Viewing Angle: 80 deg;
LTL-1CHEE
LTL-1CHEE by Lite-on Technology is a 3.1mm SINGLE COLOR LED with peak wavelength of 635nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices due to its compact size and high luminous intensity of 19.0mcd.
LTL-14CDJN-DL
DUAL COLOR LED;
LTL-14CDJNH36P
LTL-14CDJNH36P by Lite-on Technology is a 2.9mm DUAL COLOR LED with COMMON BIPOLAR TERMINAL. It has a peak wavelength of 585/565nm, forward current of 0.02A, and viewing angle of 80°. Ideal for applications requiring diffused white light in compact spaces due to its small size and radial mount feature.
LTL-14CDJNH79
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.7/12.6; Lens Type: DIFFUSED WHITE; Terminal Finish: Pure Tin (Sn);
LTL-14CDJNHBP
LTL-1CHG-011A
LTL-1CHG-011A by Lite-on Technology is a 3.1mm SINGLE COLOR LED with peak wavelength of 565nm, emitting GREEN light. With 0.03A forward current and 60° viewing angle, it's ideal for TR packing in various applications requiring diffused lighting.
LTL-1CHG
LTL-1CHG by Lite-on Technology is a 3.1mm SINGLE COLOR LED with peak wavelength of 565nm, emitting GREEN light. With a max forward current of 0.03A and forward voltage of 2.6V, it's ideal for applications requiring low power consumption and high luminous intensity up to 12.6mcd in a viewing angle of 60°.
LTL-1CHG-002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; T-code: T-1;
LTL-1CHGE-0D1A
LTL-1CHGH114
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Maximum Operating Temperature: 100 Cel;
LTL-1CHG-002A
LTL-1CHG-002A by Lite-on Technology is a 3.1mm SINGLE COLOR LED with peak wavelength of 565nm, emitting GREEN light. With 0.03A forward current and 12.6mcd luminous intensity, it's ideal for applications requiring a diffused lens and radial mount like indicator lights or displays.
LTL-1CHG-012A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Size: 3.1 mm;
LTL-1234A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL1234A
Taiwan Liton Electronic C
LTL1234A by Taiwan Liton Electronic C is a 2mm single color LED with a peak wavelength of 565nm and a max forward current of 0.03A. It is commonly used in applications that require green light emission, such as indicator lights or displays.
LTL1BEKVJNN-ADB
LTL-1CHYE-001
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40; Lens Type: TRANSPARENT; Maximum Forward Current: .02 A;
LTL-1CHAE-071A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 29.0; Lens Type: TRANSPARENT; Peak Wavelength (nm): 610;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved