Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
6N138S-TA1 by Lite-on Technology is a single optocoupler with a max forward current of 0.02 A and isolation voltage of 2500 V. It is ideal for logic IC output applications, operating b/w temperatures of 0°C to 70°C. The device has a max on-state current of 0.06 A and comes in tape and reel packaging.
Median Price
$0.526
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$0.456
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.596
$0.542
$0.489
Mouser Electronics
$0.880
$0.443
$0.345
$0.282
DigiKey
$0.451
$0.378
Chip1Stop
$0.258
Verical
$0.254
Nova Conductors
$0.276
Vyrian
Aztec Data Supply Inc.
$0.168
Semicontronic
$0.219
$0.214
$0.212
Argo Parts USA
$0.267
Continental Prestige Electronics
$0.270
Netroflash
Component Stockers USA
$0.380
$0.260
$0.240
Corohmni
$0.505
Advanced Electronics
Perfect Parts
Single configuration simplifies the circuit design and reduces complexity.
Capable of handling higher currents for efficient operation.
Designed specifically for logic IC outputs, ensuring compatibility and reliable signal transmission.
Operates effectively within a wide temperature range, suitable for various environments.
Can function in low-temperature conditions without performance degradation.
TR packaging method is suitable for automated assembly processes, enhancing efficiency in manufacturing.
Provides high isolation voltage for safety and protection against voltage surges.
Capable of supporting higher on-state currents for reliable signal transmission.
Optocoupler Circuit Outputs 6N138S-TA1 attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Lite-on Technology
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
6N138S-TA1 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
Hitachi
5962-8957101PA
Defense Logistics Agency
Defense Logistics Agency's 5962-8957101PA is a complex optocoupler with 2 functions. It has a max forward current of 0.01A and operates b/w -55 to 125°C. With a data rate of 40MBps, it is ideal for logic IC output applications.
TLP5231(D4-TP,E
Toshiba
Toshiba's TLP5231(D4-TP,E is a logic IC output optocoupler with max forward current of 0.025A, isolation voltage of 5000V, and response time of 200ns. Ideal for complex circuit outputs in applications requiring surface mounting, operating b/w -40 to 110°C with a supply voltage of at least 3.3V.
TLP2770(E
Toshiba's TLP2770(E optocoupler features a max isolation voltage of 5000V, 32ns response time, and 20MBps data rate. Ideal for logic IC output applications with a single configuration, it operates b/w -40°C to 125°C temperature range.
TLP250HF
Toshiba TLP250HF is a single optocoupler with max. forward current of 0.02A, ideal for logic IC output applications. With a response time of 50ns and isolation voltage of 3750V, it operates b/w -40 to 125°C temperatures. Suitable for through-hole mounting with a min supply voltage of 10V.
HCPL2601SD
HCPL2601SD by Onsemi is a single optocoupler with a max forward current of 0.05A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a response time of 75ns. Suitable for surface mounting, it has a nominal voltage of 5V and data rate of 10MBps.
5962-8978501PA
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: OPEN COLLECTOR, HIGH RELIABILITY; No. of Functions: 2; Nominal Data Rate: .1 MBps; Maximum Forward Current: .01 A; Maximum Operating Temperature: 125 Cel;
HCPL2631SVM
The Onsemi HCPL2631SVM is a 2-channel logic IC output optocoupler with separate configuration. It offers a max isolation voltage of 5000V, nominal data rate of 10MBps, and operates at temperatures ranging from -40 to 100°C. Ideal for applications requiring high-speed signal transmission in industrial electronics and automation systems.
HCPL-0731-500E
Broadcom
Broadcom's HCPL-0731-500E is a 2-channel logic IC output optocoupler with separate configuration. It has a max forward current of 0.02A, min supply voltage of 4.5V, and max operating temp of 70°C. Ideal for applications requiring high isolation voltage and surface mounting feature.
HCPL-0701#500
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Data Rate: .1 MBps; Maximum On State Current: .06 A; Maximum Isolation Voltage: 2500 V; Configuration: SINGLE;
HCPL-2531-500E
Broadcom's HCPL-2531-500E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.025A, operating temp range from -55 to 100°C, and isolation voltage of 3750V. Ideal for logic IC output applications requiring high isolation and data rates up to 1MBps.
6N136
Aborn Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SINGLE; Shape: RECTANGULAR; No. of Elements: 1; Nominal Response Time: 30 ns;
HCNW3120#500
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Maximum Forward Current: .025 A; No. of Functions: 1; Configuration: COMPLEX; No. of Elements: 1;
6N137.S
Qt Optoelectronics
6N137.S by Qt Optoelectronics is a single optocoupler with max forward current of 0.05A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a data rate of 10MBps.
TLP2745(E(T
Toshiba's TLP2745(E(T optocoupler features 0.015A max forward current, 4.5V min supply voltage, and 110°C max operating temp. Ideal for logic IC output applications due to its fast 3ns response time and high 5000V isolation voltage in a surface mount configuration.
HCPL2631SD
HCPL2631SD by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.03A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
HCPL2731
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE;
6N139S
Everlight Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Maximum On State Current: .06 A; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
HCPL2730S
HCPL2730S by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It has a max isolation voltage of 2500V and can handle up to 0.06A on-state current. Ideal for applications requiring high-voltage isolation and signal transmission in harsh environments.
HCPL-0201
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .01 A; Nominal Data Rate: 5 MBps; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
HCPL-063L-060E
Broadcom's HCPL-063L-060E is a 2-channel logic IC output optocoupler with separate configuration. It operates at -40 to 85 °C, with max isolation voltage of 3750V and data rate of 15 MBps. Ideal for surface mount applications requiring fast response time and high isolation levels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6N137
Sharp Corporation
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: COMPLEX;
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: SINGLE; Maximum Forward Current: .02 A;
Renesas Electronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Nominal Response Time: 50 ns; Minimum Operating Temperature: 0 Cel;
Telefunken Microelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; Nominal Response Time: 50 ns;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Supply Voltage: 4.5 V; No. of Elements: 1; No. of Functions: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; No. of Elements: 1; Nominal Data Rate: 10 MBps; Configuration: SINGLE;
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: 10 MBps; Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1; No. of Functions: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: CMOS COMPATIBLE, UL APPROVED, CAN ALSO OPERATE ON 5V; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Nominal Data Rate: 15 MBps;
Vishay Intertechnology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; No. of Elements: 1; Maximum Forward Current: .015 A;
Morrihan International
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Supply Voltage: 5 V; JESD-609 Code: e0; No. of Elements: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum On State Current: .05 A; Maximum Forward Current: .05 A;
Isocom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Nominal Data Rate: 10 MBps; Minimum Supply Voltage: 4.5 V;
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Nominal Data Rate: 10 MBps; Maximum Forward Current: .05 A;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL APPROVED; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3;
Texas Instruments
6N137 by Texas Instruments is a logic IC output optocoupler with max. forward current of 0.02A and isolation voltage of 3000V. It operates b/w 0-70°C, ideal for complex circuit outputs requiring high hysteresis ratio (0.0167) and on-state current up to 0.05A.
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum On State Current: .05 A; No. of Elements: 1;
Marktech Optoelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 70 Cel;
General Instrument Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; JESD-609 Code: e0; Nominal Data Rate: 10 MBps; Minimum Operating Temperature: -40 Cel;
Rs Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; No. of Elements: 1; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved