Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THRESHOLD DETECTOR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 40 MHz; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
Median Price
$10.885
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Rochester
1+ parts
$8.170
100+ parts
$7.680
1k+ parts
$6.940
10k+ parts
-
Chip1Stop
$9.500
$7.160
Analog Devices Inc
$12.270
$10.108
$6.440
Element14
$12.600
$11.109
$7.980
$7.824
Newark
$12.790
$8.820
$8.140
Mouser Electronics
$14.110
$9.490
$8.890
DigiKey
$10.389
$8.891
$8.733
Richardson RFPD
$8.540
Arrow
$7.793
Verical
Digiode
$7.762
Nova Conductors
$8.400
Chip Stock
Anansix
Contempo Components LLC
Vyrian
Vectronix, Inc
Lantek
Corohmni
$0.864
Parana Technologies
$1.168
$1.086
Aztec Data Supply Inc.
$1.190
IDEA Electronic Components Group
$1.256
$1.193
DigiPath Technology Company
$1.959
$1.881
MARBEL Systems
$2.508
Texas Native Microelectronics
$2.883
$2.768
$2.681
$2.537
Kenton Components
$3.460
$3.044
Semicontronic
$5.880
$5.733
$5.704
Ampacity Inc.
Corphita
$7.353
Qasali Group International
$7.784
$7.239
$6.850
Netroflash
$7.812
Continental Prestige Electronics
$9.880
$7.670
$6.260
Lixinc
Argo Parts USA
Perfect Parts
Infinite Electronics LLP (Excess)
RF/Microwave Detectors LT5538IDD#PBF attributes and parameters. Explore more RF/Microwave Detectors devices from Linear Technology
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
LT5538IDD#PBF RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Zetex Plc
Hitachi
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LTC5508ESC6#PBF
Analog Devices
LTC5508ESC6#PBF by Analog Devices is a linear detector with a frequency range of 300-7000 MHz. It has a max input power of 12 dBm and min input power of -32 dBm, suitable for RF applications. With an operating temperature range from -40 to 85 °C, it is ideal for RF/microwave systems requiring precise power detection.
LT5534ESC6
Linear Technology
LINEAR DETECTOR; JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 50 MHz; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT;
MAX2204EXK+T
Maxim Integrated
THRESHOLD DETECTOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Output Polarity: POSITIVE;
MAX2205EBS+T10G45
THRESHOLD DETECTOR; JESD-609 Code: e1; Terminal Finish: TIN SILVER COPPER;
MAX2205EBS-T
THRESHOLD DETECTOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 2.7/5;
LTC5508ESC6#TR
LTC5508ESC6#TR by Analog Devices is a linear detector with a frequency range of 300-7000 MHz. It has a max input power of 12 dBm and min input power of -32 dBm. Ideal for RF applications, it operates b/w -40 to 85 °C, making it suitable for various temperature conditions.
33330C-001
Broadcom
LINEAR DETECTOR; Construction: COAXIAL; Minimum Operating Frequency: 10 MHz; Minimum Operating Temperature: -65 Cel; Maximum Input Power (CW): 23 dBm; Output Polarity: NEGATIVE;
HMC713MS8TR
THRESHOLD DETECTOR;
ADL6012ACPZN-R7
ADL6012ACPZN-R7 by Analog Devices is a RF/Microwave Detector with 20 dBm CW input power, 1.92 max VSWR, and 5V supply. Ideal for linear detection applications in the frequency range of 2-67000 MHz. It features a plastic/epoxy package, operates b/w -40 to 105 °C, and has 10 terminals with nickel palladium gold finish.
HMC602LP4RTR
Analog Devices' HMC602LP4RTR is a 24-terminal RF/Microwave Detector with a max input power of 15 dBm. Operating from -40 to 85°C, it detects signals from 1 MHz to 800 MHz with a characteristic impedance of 50 ohm. Ideal for threshold detection in various applications.
ADL6010SCPZN-R7
ADL6010SCPZN-R7 by Analog Devices is a RF/Microwave Detector with max input power of 20 dBm, operating freq. range from 500 MHz to 43500 MHz, and characteristic impedance of 50 ohm. It is a linear detector suitable for applications requiring precise power measurements in RF systems. The device has a compact surface mount package making it ideal for space-constrained designs in various electronic equipment.
LMH2100TMX
Texas Instruments
LMH2100TMX by Texas Instruments is a 50 ohm linear detector with a frequency range of 50-4000 MHz and max input power of 10 dBm. It operates in temperatures from -40 to 85°C, making it ideal for RF/microwave applications requiring precise power detection in various environments.
LT5534ESC6#TRPBF
LINEAR DETECTOR; JESD-609 Code: e3; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 50 MHz;
HMC614LP4E
HMC614LP4E by Analog Devices is a RF/Microwave Detector with max input power of 15 dBm, operating freq range of 100-3900 MHz, and -57 dBm min input power. It is a linear detector suitable for applications requiring precise signal detection in temperature range of -40 to 85 °C.
LTC5582HDD#TRMPBF
LTC5582HDD#TRMPBF by Analog Devices is an RF/Microwave Detector with a max input power of 24 dBm and min output voltage sensitivity of 11.5 mV/mW. It operates b/w -40 to 125 °C, suitable for RMS power detection in applications spanning from 40 MHz to 10 GHz.
HMC909LP4ETR
LINEAR DETECTOR; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
VMMK-3413-TR1G
LINEAR DETECTOR; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
LMV232TLX
LMV232TLX by Texas Instruments is a linear detector with a frequency range of 50-2000 MHz. It operates b/w -40°C to 85°C and has a characteristic impedance of 50 ohm. Ideal for RF applications, this component offers Tin/Silver/Copper terminal finish for reliable performance.
8474B
LINEAR DETECTOR; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 100 Cel; Maximum Video Resistance: 1500 ohm; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 10 MHz;
VMMK-3313-BLKG
LINEAR DETECTOR; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT5537EDDB#TRMPBF
LINEAR DETECTOR; Maximum Operating Frequency: 1000 MHz; Minimum Operating Frequency: 10 MHz; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Analog Devices' LT5537EDDB#TRMPBF is a 50 ohm linear detector with a frequency range of 10-1000 MHz. It can handle up to 22 dBm CW input power and operates b/w -40°C to 85°C. Ideal for RF/microwave applications requiring precise power detection in various environments.
LT5534ESC6#TRMPBF
Analog Devices' LT5534ESC6#TRMPBF is a 50 ohm linear detector with a frequency range of 50-3000 MHz. It operates b/w -40°C to 85°C, making it suitable for RF/microwave applications. The component features matte tin terminal finish and is ideal for detecting signals in various communication systems.
LINEAR DETECTOR; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Operating Frequency: 3000 MHz; Minimum Operating Frequency: 50 MHz;
LT5537EDDB#TRPBF
Analog Devices' LT5537EDDB#TRPBF is a 50 ohm linear detector with a frequency range of 10-1000 MHz and max input power of 22 dBm. It operates b/w -40 to 85°C, making it suitable for RF/microwave applications requiring precise power detection in various environments. The component's matte tin finish ensures reliable performance in diverse setups.
LINEAR DETECTOR; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 1000 MHz; Maximum Input Power (CW): 22 dBm;
Analog Devices' LT5534ESC6#TRPBF is a 50 ohm linear detector with a frequency range of 50-3000 MHz. It operates b/w -40°C to 85°C, making it suitable for RF applications. The component features matte tin terminal finish and is ideal for RF/microwave detection purposes.
LT5534ESC6#PBF
LINEAR DETECTOR; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 3000 MHz;
LT5534ESC6#PBF by Analog Devices is a 50 ohm linear detector with a frequency range of 50-3000 MHz. It operates b/w -40°C to 85°C, making it suitable for RF applications. The component features matte tin finish and is ideal for RF/microwave detection systems.
LT5537EDDB#PBF
LT5537EDDB#PBF by Analog Devices is a RF/Microwave Detector with 22 dBm CW input power, operating from -40 to 85 °C. It has a linear detection type with 50 ohm impedance, covering frequencies from 10 MHz to 1 GHz. Ideal for applications requiring precise RF power measurements in various electronic systems.
LINEAR DETECTOR; Minimum Operating Frequency: 10 MHz; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 22 dBm; Minimum Operating Temperature: -40 Cel;
LT5537EDDB#TRM
Analog Devices' LT5537EDDB#TRM is a 50 ohm linear detector with a frequency range of 10-1000 MHz and max input power of 22 dBm. It operates b/w -40 to 85 °C, making it suitable for RF applications requiring precise power detection in various environments.
LINEAR DETECTOR; JESD-609 Code: e0; Maximum Operating Frequency: 1000 MHz; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
LT5537EDDB#TR
Analog Devices' LT5537EDDB#TR is a 50 ohm linear detector with 10-1000 MHz frequency range, -40 to 85°C operating temp, and 22 dBm CW input power. Ideal for RF applications requiring precise power detection in components.
LINEAR DETECTOR; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 10 MHz; JESD-609 Code: e0; Maximum Operating Frequency: 1000 MHz; Maximum Input Power (CW): 22 dBm;
LT5537EDDB
Analog Devices' LT5537EDDB is a 50 ohm linear detector with 10-1000 MHz frequency range, -40 to 85°C operating temp, and 22 dBm CW input power. Ideal for RF/microwave applications requiring precise power detection in components.
LINEAR DETECTOR; JESD-609 Code: e0; Minimum Operating Frequency: 10 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 1000 MHz; Terminal Finish: Tin/Lead (Sn/Pb);
LT5581IDDB#PBF
LINEAR DETECTOR; Maximum Voltage Standing Wave Ratio: 2; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Input Power (CW): 6 dBm; Construction: COMPONENT; Minimum Input Power (CW): -34 dBm;
LINEAR DETECTOR; Maximum Operating Frequency: 6000 MHz; Terminal Finish: Matte Tin (Sn); Minimum Input Power (CW): -34 dBm; Minimum Operating Frequency: 10 MHz; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved