Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Regulators; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 2 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Nova Conductors
Vyrian
One Stop Electronics
$0.500
Corohmni
$2.300
MARBEL Systems
$2.534
Texas Native Microelectronics
$2.913
$2.796
$2.709
$2.563
Kenton Components
$3.496
$3.076
Ampacity Inc.
$5.500
Parana Technologies
$5.722
$5.322
IDEA Electronic Components Group
$6.153
$5.845
AZTECH Wire
$6.213
Qasali Group International
$7.865
$7.315
$6.921
DigiPath Technology Company
$9.599
$9.215
Semicontronic
$11.500
$11.212
$11.155
Argo Parts USA
Corphita
Aranea Global
Continental Prestige Electronics
Other Function Regulators LT3007ETS8-3.3#TR attributes and parameters. Explore more Other Function Regulators devices from Linear Technology
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-30 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Sub-Category:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
LT3007ETS8-3.3#TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
TPS77150DGKT
TPS77150DGKT by Texas Instruments is a CMOS regulator with 5V output voltage, 0.15A max current, and 2% voltage tolerance. It is used in applications requiring precise power regulation in temperature range of -40 to 125°C, featuring a small outline package for surface mount assembly.
LT1185CT#06PBF
Linear Technology
Other Regulators; No. of Terminals: 5; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Terminal Finish: MATTE TIN OVER NICKEL; No. of Outputs: 1;
LM238KSTEEL
National Semiconductor
LM238KSTEEL by National Semiconductor is a BIPOLAR regulator with an operating temperature range of -25 to 150°C. It offers an adjustable output voltage from 1.2V to 32V, making it suitable for various applications requiring precise voltage regulation in a METAL package.
SN0211032DBVR
Texas Instruments SN0211032DBVR is a CMOS regulator with 1.6V output voltage, 0.15A output current, and 4% voltage tolerance. It operates b/w -40°C to 125°C, suitable for applications requiring precise voltage regulation in compact designs like portable electronics and IoT devices.
LM317K
Comset Semiconductors
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Maximum Line Regulation (%/V): .05; Operating Temperature (TJ-Min): 0 Cel; Adjustability: ADJUSTABLE;
UA723ML
UA723ML by Texas Instruments is an adjustable bipolar regulator with a min output voltage of 2V and max output voltage of 37V. It has a package style of cylindrical metal body with wire terminals, suitable for applications requiring precise voltage regulation in temperatures ranging from -55°C to 125°C.
UA78M06CKD3
UA78M06CKD3 by Texas Instruments is a fixed 6V voltage regulator with a max output current of 0.5A and operating temperature range from 0 to 125°C. This bipolar technology regulator has a plastic/epoxy package body material, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
UCC383-0T
UCC383-0T by Texas Instruments is a BICMOS regulator with adjustable output voltage from 1.5V to 8.5V and max current of 3A. It operates b/w 0°C to 70°C, making it suitable for various applications requiring precise voltage regulation in a compact package with plastic/epoxy body material.
SM74501MPX-5.0/NOPB
SM74501MPX-5.0/NOPB by Texas Instruments is a 3-terminal fixed voltage regulator with a nominal output of 5V, suitable for applications requiring a max load current of 0.05A. It operates b/w -40 to 125°C, with a max input voltage of 60V and offers precise line regulation at 0.03%.
TS78L05CS
Taiwan Semiconductor
TS78L05CS by Taiwan Semiconductor is a fixed 5V voltage regulator with a max output current of 0.04A. It operates in temperatures ranging from 0 to 125°C and has a max input voltage of 35V, making it suitable for various electronic applications requiring stable power supply.
LM105H
General Electric Solid State
Other Regulators; No. of Terminals: 8; Terminal Form: WIRE; No. of Outputs: 1; Adjustability: ADJUSTABLE; JESD-609 Code: e0;
LM309K
Motorola
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Package Body Material: METAL; Minimum Operating Temperature: 0 Cel; Terminal Finish: Tin/Lead (Sn/Pb);
LM723CH
Intersil
Other Regulators; No. of Terminals: 10; Terminal Form: WIRE; Maximum Operating Temperature: 70 Cel; Maximum Output Voltage-1: 37 V; No. of Outputs: 1;
UA7906CKC1
UA7906CKC1 by Texas Instruments is a -6V fixed voltage regulator with 1.5A output current and 2.3V dropout voltage, suitable for applications requiring stable power supply. With a max input voltage of 35V and operating temperature range from 0 to 125°C, it offers precise regulation in various electronic devices. The package body material is made of plastic/epoxy, making it durable for long-term use in different environments.
LM104L/883B
LM104L/883B by Texas Instruments is a MIL-STD-883 Class B (Modified) rated bipolar regulator with adjustable output voltage from -0.015V to -40V. Its cylindrical metal package makes it suitable for applications requiring precise voltage regulation in harsh environments with temperatures ranging from -55°C to 125°C.
LP2996LQ
LP2996LQ by Texas Instruments is a DDR termination regulator in a square chip carrier package with 16 terminals. It features a 0.5mm terminal pitch, 0.8mm max seated height, and measures 4x4mm. Ideal for applications requiring surface mount regulators with very thin profiles.
L7824CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Nominal Dropout Voltage-1: 4.2 V;
LM138K/883C
LM138K/883C by National Semiconductor is a metal-packaged bipolar regulator with an operating temperature range of -55°C to 150°C. It has an adjustable output voltage from 1.2V to 32V, making it suitable for various applications in military and industrial environments requiring MIL-STD-883 Class C screening.
LP2995MX/NOPB
LP2995MX/NOPB by Texas Instruments is a DDR termination regulator with 1.25V min output voltage and 1.5A max output current. It comes in a small outline package with gull wing terminals, suitable for applications requiring precise voltage regulation in compact spaces like mobile devices or computer peripherals.
NCV51200MNTXG
NCV51200MNTXG by Onsemi is a DDR termination regulator with AEC-Q100 screening. It features a max operating temperature of 125°C and min operating temperature of -40°C. This small outline, heat sink package is ideal for automotive applications requiring precise voltage regulation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT3032MPDE#PBF
Analog Devices
LT3032MPDE#PBF by Analog Devices is a dual-output LDO regulator with adjustable settings. It offers excellent load regulation of -0.075% and line regulation of 0.006%. With a small outline package style, it is suitable for applications requiring precise voltage regulation in compact spaces.
LT3007ETS8-3.3#TRMPBF
LT3080ET#31PBF
Other Regulators; No. of Terminals: 5; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Output Voltage-1: .8 V;
Other Regulators; No. of Terminals: 5; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Peak Reflow Temperature (C): 260; Nominal Dropout Voltage-1: .35 V;
LT3007ETS8#TRMPBF
Other Regulators; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Nominal Dropout Voltage-1: .3 V;
Other Regulators; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Surface Mount: YES; Terminal Position: DUAL;
LT3007ETS8-1.5#TRMPBF
LT3007ETS8-1.8#TRMPBF
Analog Devices' LT3007ETS8-1.8#TRMPBF is a bipolar technology regulator with 1.8V output voltage, ideal for applications requiring precise voltage regulation. With a max load regulation of 0.015% and operating temperature range from -40 to 125°C, it offers stable performance in various environments. The small outline package with gull wing terminals makes it suitable for space-constrained designs that require efficient power management.
LT3007ETS8-2.5#TRMPBF
Analog Devices' LT3007ETS8-2.5#TRMPBF is a bipolar technology regulator with 2% voltage tolerance and 2.5V output. It operates b/w -40°C to 125°C, suitable for applications requiring precise voltage regulation in compact spaces like consumer electronics and industrial control systems.
LT3007ETS8-5#TRMPBF
LT3007ETS8-3.3#TR
LT3007ETS8-5#TR
LT3007ETS8-1.2#TRMPBF
LT3007ETS8-2.5#TR
LT3007ETS8#TR
Other Regulators; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Packing Method: TR; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved