Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Length (Package): 2.01 mm; Width (Package): 1.25 mm; Minimum Operating Temperature: -55 Cel;
Median Price
$0.144
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aranea Global
$0.141
$0.135
Continental Prestige Electronics
Argo Parts USA
$0.140
Authorized Procurement Solutions
Non-linear Resistors VC080518A400TP attributes and parameters. Explore more Non-linear Resistors devices from KYOCERA AVX
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
VC080518A400TP Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Assembly/Origin - Conformal Tantalum Production 22/Jun/2020
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
1554216004
Molex
WIRE AND CABLE;
EU2B-YS3203F
Idec
ROTARY SWITCH;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RF0315-000
Littelfuse
PTC RESETTABLE FUSE; Terminal Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
RF2628-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.25 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE;
RXEF090
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): 3 mm; Rated AC Voltage (URac): 72 V; Packing Method: BULK;
CL-60
Keystone Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .025 W; Terminal Placement: RADIAL; No. of Terminals: 2;
B59707A0120A062
TDK
TDK's B59707A0120A062 is a PTC thermistor with 75 ohm resistance, rated for 80V AC/DC. It features dual-ended terminals and wraparound shape, suitable for overcurrent protection applications. Operating temperature ranges from -40 to 125°C, making it ideal for surface mount installations in various electronic devices.
B72220S1300K102
TDK's B72220S1300K102 is a VARISTOR with 30V RMS and 34V DC max circuit voltage. It has METAL OXIDE FILM tech, 26J energy absorption, and -40 to 85°C operating range. Ideal for surge protection in electronics due to its high energy capacity and radial terminal placement.
RXEF185K-AP
TE Connectivity
TE Connectivity's RXEF185K-AP is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating voltage is 72V with dimensions of 16.76mm x 3mm x 23mm, suitable for through hole mounting in various industries.
V390CH8T
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 250 V; Terminal Placement: DUAL ENDED;
RF1351-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: MINIMUM RESISTANCE IS 2.10 OHMS; Rated AC Voltage (URac): 30 V; Package Style (Meter): SMT;
RF0318-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; No. of Terminals: 2;
RXEF110
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 72 V; Width (Package): 3 mm; Height (Package): 12.8 mm;
B59607-A120-A62
B59607-A120-A62 by TDK is a PTC thermistor with 55 ohm resistance and 25% tolerance. It is used for overload protection, featuring dual-ended terminals in a rectangular package. With a rated AC voltage of 30V, it operates b/w -20°C to 85°C, suitable for surface mount applications.
V275LA20APW
V275LA20APW by Littelfuse is a VARISTOR with 275V max circuit RMS voltage, 75J energy capacity, and -55 to 125 °C operating temp. Ideal for surge protection in various applications due to its METAL OXIDE technology and THROUGH HOLE MOUNT design.
RUEF400K-AP
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
MICROSMD110F-2
TE Connectivity's MICROSMD110F-2 is a PTC resettable fuse with 2 terminals, rated for 6V AC voltage and 0.8W power dissipation. It is designed for temperature sensing applications, featuring dual-ended terminal placement in a rectangular surface mount package, suitable for use up to 85°C operating temperature.
NTC0805J5K0
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
RXEF185K
TE Connectivity's RXEF185K is a PTC thermistor with 0.19 ohm resistance and 72V operating voltage. It offers overload protection in applications, featuring radial terminal placement and disk package shape. With CSA, TUV, UL certifications, it operates b/w -40°C to 85°C temperatures.
LVR100S-240
TE Connectivity's LVR100S-240 is a PTC resettable fuse resistor with a resistance of 0.218 ohm and max operating temperature of 85°C. It is used for temperature sensing applications, has radial terminal placement, and can handle a max circuit RMS voltage of 240V.
SMD050F-2
TE Connectivity's SMD050F-2 is a surface mount PTC thermistor with a rectangular package and dual terminal placement. It offers overload protection, operates b/w -40°C to 85°C, and has a rated power dissipation of 1.5W.
B57237-S220-M
TDK's B57237-S220-M NTC Thermistor has a resistance of 22 ohm with 20% tolerance. Rated for 265V AC, it operates b/w -55°C to 170°C. Ideal for soft start applications due to its thermal sensitivity index of 3060 K.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VC080514A300DP
KYOCERA AVX
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Length (Package): 2.01 mm; Operating Voltage: 14 V;
VC080530A650DP
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; No. of Terminals: 2; Terminal Placement: DUAL ENDED;
VC080503C100RP
KYOCERA AVX's VC080503C100RP is a VARISTOR with max. operating voltage of 3.3V and energy capacity of 0.3J. Its dual-ended terminals make it suitable for SMT applications in electronics, offering protection against voltage surges from -55 to 125°C.
Kyocera
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Packing Method: TR, 7 INCH; Width (Package): 1.25 mm;
VC080505A150DP
KYOCERA AVX's VC080505A150DP is a VARISTOR with 5.6V operating voltage and 4V max RMS voltage, suitable for surge protection applications. It has a 0.1J energy absorbing capacity, operates b/w -55°C to 125°C, and features dual-ended terminals in a rectangular SMT package.
VC080505C150DP
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Shape (Package): RECTANGULAR PACKAGE; Operating Voltage: 5.6 V;
VC080526C580DP
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 18 V; Package Style (Meter): SMT; Height (Package): 1.02 mm;
VC080514A300
KYOCERA AVX's VC080514A300 is a chip-shaped VARISTOR with dual-ended terminals and metal oxide film technology. It has a max energy absorbing capacity of 0.1 J and can operate at temperatures ranging from -55 to 125 °C. Suitable for surface mount applications, it offers protection against voltage surges up to 14 V.
VC080514A300D
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Voltage: 14 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: .1 J;
VC080514A300TP
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 1.25 mm; Height (Package): 1.02 mm; JESD-609 Code: e3;
VC080526A580RP
KYOCERA AVX's VC080526A580RP is a VARISTOR with max operating voltage of 26V and max energy absorbing capacity of 0.1J. It is a non-linear resistor used for surge protection in various electronic applications.
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 1.25 mm; Length (Package): 2.01 mm; Package Style (Meter): SMT;
VC080503A100DP
KYOCERA AVX's VC080503A100DP is a VARISTOR with dual-ended terminal placement and a rectangular package. It has a max energy absorbing capacity of 0.1 J and can operate at temperatures ranging from -55 to 125 °C. This surface mount resistor is suitable for applications requiring voltage protection.
VC080518A400RP
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Shape (Package): RECTANGULAR PACKAGE; Maximum Circuit RMS Voltage: 13 V;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: .1 J; JESD-609 Code: e3; No. of Terminals: 2;
VC0805K121R020
KEMET Corporation
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .005 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Maximum Circuit DC Voltage: 26 V;
VC080530A650RP
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 1.25 mm; Packing Method: TR, 7 INCH; Package Style (Meter): SMT;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Length (Package): 2.01 mm; Terminal Placement: DUAL ENDED; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
VC080518A400
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 18 V; Maximum Energy Absorbing Capacity: .1 J;
VC080518A400TZ
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 1.25 mm; No. of Terminals: 2; Height (Package): 1.02 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved