Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TPSD107K016R0125 by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance, 16V URdc, and 0.06 Tan Delta. Ideal for applications requiring low leakage current (0.016mA), high ripple current (438mA), and operating temperatures from -55°C to 125°C in SMT designs.
Median Price
$0.521
Lifecycle Status
Suppliers In-Stock
50
In-Stock Inventory
1k+
Newark
1+ parts
$1.200
100+ parts
$0.871
1k+ parts
$0.670
10k+ parts
-
DigiKey
$1.280
$0.605
$0.484
$0.431
Mouser Electronics
$0.450
$0.403
Arrow
$0.392
$0.367
Verical
TTI Europe
$0.353
Future Electronics
$0.415
$0.400
Element14
$0.663
$0.481
TTI
Farnell
$0.511
Chip1Stop
DF Sales Co.
$0.300
Nova Conductors
$0.504
Maritex
$0.728
$0.435
$0.319
NAC Semi
$1.010
$0.950
TME
$1.090
$0.591
$0.434
$0.417
IBS Electronics
$1.445
$0.582
Component Electronics Inc.
$2.310
$1.730
$1.500
Rutronik
$0.462
$0.436
Vyrian
Chip Stock
Bristol Electronics
$0.464
$0.346
$0.322
MISTER SPROCKETS
Dan-Mar Components
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
LWI Electronics Inc
Prism Electronics
Electronics Depot
Bas Electronics GmbH & Co. KG
Avant Electronics Limited
ABC Electronics Ltd.
Quantum Digital Technology
CirComp Electronics, Inc.
Sunrise Surplus Inc.
SPM Sales
QIE Inc.
Atlantic Semiconductor
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
PC Components Company LLC
Semi Source
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
NPI Materials, Inc.
A2Z Electronics, Inc.
Cyclops Electronics Ltd
Speed Components Ltd
Holdelec - ElecDif-Pro
Advanced Electronics
$0.097
$0.092
Corohmni
$0.256
Ampacity Inc.
$0.261
Semicontronic
$0.254
$0.253
Decca Corp
Aztec Data Supply Inc.
$0.320
Argo Parts USA
$0.489
Perfect Parts
Abacus Technologies
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Assy Fe
Continental Prestige Electronics
$0.572
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
S.R.D Solutions
SIE Connect GmbH (Excess)
Tantalum capacitors are known for their high reliability and stability, making them a great choice for critical applications.
Low tan delta indicates low loss and excellent efficiency, ensuring optimal performance of the capacitor.
With low leakage current, this capacitor offers high insulation resistance, reducing power loss.
Rectangular package design is space-efficient and easy to mount, suitable for compact electronic devices.
High ripple current rating allows the capacitor to handle fluctuations in power supply smoothly.
Tape and reel packaging simplifies automated assembly processes, improving manufacturing efficiency.
Size code 2917 denotes a standard size, ensuring compatibility with various circuit designs.
Two terminals make connection easy and secure, enhancing the overall reliability of the capacitor.
Surface-mount technology enables easy installation on PCBs, saving space and simplifying assembly.
J bend terminals provide mechanical stability, reducing the risk of detachment during operation.
Negative tolerance of 10% ensures that the actual capacitance value will not fall below the specified rating.
High maximum operating temperature allows the capacitor to function reliably in elevated temperature environments.
Tantalum capacitors offer high capacitance in a compact size, making them ideal for high-performance applications.
Wide operating temperature range ensures the capacitor can function in both extreme cold and hot conditions.
Matte tin finish with nickel barrier offers excellent solderability and corrosion resistance.
Polarity ensures proper orientation during installation, preventing damage to the capacitor and the circuit.
Low profile design makes this capacitor suitable for slim and space-constrained electronic devices.
Compact width allows for easy integration into compact circuit layouts.
Low ESR value indicates minimal energy loss and high efficiency in energy storage applications.
Surface mount capability simplifies PCB assembly and offers mechanical stability during operation.
Standard length facilitates easy placement and alignment on the PCB.
Positive tolerance ensures the actual capacitance value will not exceed the specified rating, maintaining consistency in performance.
High capacitance value allows this capacitor to store and release a significant amount of energy, suitable for filtering and smoothing applications.
16V rated DC voltage makes this capacitor suitable for low to medium voltage applications.
Fixed Capacitors TPSD107K016R0125 attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TPSD107K016R0125 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Transys Electronics
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Meritek Electronics
CL05C101JB5NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05C101JB5NNNC is a ceramic capacitor with 0.0001uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring high precision and stability in electronic circuits.
M39006/220377
Cornell Dubilier Electronics
M39006/220377 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with 68uF capacitance, 60V rated DC voltage, and 0.13 Tan Delta. It is polarized, has a leakage current of 0.002mA, and operates b/w -55 to 125 °C. Ideal for applications requiring high ripple current handling in military-grade electronics per MIL-C-39006/22 standard.
EEEFK1H471AM
Panasonic
Panasonic EEEFK1H471AM is a 470uF Aluminum Electrolytic Capacitor with 50V URdc. It features Tan Delta of 0.12, Leakage Current of 0.235mA, and Ripple Current of 1207.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
M39006/25-0052
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL32B225KCJSNNE
CL32B225KCJSNNE by Samsung Electro-mechanics is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and matte tin terminal finish. Ideal for surface mount applications requiring high capacitance stability in a compact rectangular package.
JMK107ABJ106MAHT
Taiyo Yuden
Taiyo Yuden's JMK107ABJ106MAHT is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it has a compact SMT package ideal for automotive applications. With dimensions of 1.6mm x 0.8mm x 0.8mm, this multi-layer capacitor offers high reliability and performance in harsh environments.
293D106X9010A2TE3
Vishay Intertechnology's 293D106X9010A2TE3 is a TANTALUM CAPACITOR with 10uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
GRM32ER71E226KE15L
Murata Manufacturing
Murata Manufacturing's GRM32ER71E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CGA8P1X7R1E226M250KC
TDK
TDK's CGA8P1X7R1E226M250KC is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT package shape and wraparound terminals facilitate easy surface mount installation.
Vishay Tansitor
CC0402JRNPO9BN101
Yageo
Yageo's CC0402JRNPO9BN101 is a SMT ceramic capacitor with 0.0001uF capacitance and 50V URdc. It features C0G temp characteristics, -55 to 125 °C operating range, and 5% tolerance. Ideal for applications requiring compact size, stable performance, and high reliability in various electronic circuits.
CL21B105KBFNNNG
Samsung Electro-mechanics' CL21B105KBFNNNG is an 0805 SMT ceramic capacitor with 1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in a wide temperature range.
C0603C104K5RAC
KEMET C0603C104K5RAC is a ceramic capacitor with 0.1uF capacitance, 50V URdc, and X7R temperature code. Ideal for SMT applications, it has a compact rectangular package (1.6mm x 0.8mm x 0.8mm) with wraparound terminals and -55°C to 125°C operating range.
GCJ31CR71H225KA12L
Murata Manufacturing's GCJ31CR71H225KA12L is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
GCM155R71H104KE02D
Murata Manufacturing's GCM155R71H104KE02D is a ceramic capacitor with 0.1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is used in SMT applications for automotive electronics due to its AEC-Q200 compliance and compact 0402 size.
C0603C105K3PACTU
KEMET C0603C105K3PACTU is a 1uF ceramic capacitor with 10% tolerance, X5R temp coefficient, and 25V rated voltage. Ideal for SMT applications, it operates b/w -55°C to 85°C. Suitable for various electronic devices requiring compact and reliable capacitors.
C0402C104J4RACTU
KEMET C0402C104J4RACTU is a ceramic capacitor with 0.1uF capacitance, rated at 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CGA5L3X5R1H106K160AB
TDK's CGA5L3X5R1H106K160AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X5R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and compact 3.2x1.6x1.6mm size for surface mounting feature.
ZRB18AR61E106ME01L
Murata Manufacturing's ZRB18AR61E106ME01L is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its small size (1.6mm x 0.8mm x 1mm) and wraparound terminals.
C1608X5R1H104K080AA
The TDK C1608X5R1H104K080AA is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPSD106K035R0300
KYOCERA AVX
TPSD106K035R0300 by KYOCERA AVX is a 10uF tantalum capacitor with a rated DC voltage of 35V. It has a low tan delta of 0.06 and leakage current of 0.0035mA, making it suitable for applications requiring high reliability and stability in a compact size.
TPSD107K010R0100
KYOCERA AVX TPSD107K010R0100 is a SMT TANTALUM CAPACITOR with 100uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring low leakage current (0.01mA), high ripple current (490mA), and operating temperatures from -55 to 125°C.
TPSD107K010R0100V
TPSD107K010R0100V by KYOCERA AVX is a 100uF tantalum capacitor with a rated DC voltage of 10V. It has a low tan delta of 0.06 and leakage current of 0.01mA, making it suitable for applications requiring high reliability and stable performance in a compact size.
TPSD107K016R0100
TPSD107K016R0100 by KYOCERA AVX is a TANTALUM CAPACITOR with capacitance of 100 uF and rated DC voltage of 16 V. It has low Tan Delta (0.06) and leakage current (0.016 mA), making it suitable for applications requiring high ripple current (490 mA) and operating temperature up to 125 °C.
TPSD107M010R0100
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD106K035R0125
TPSD106K035R0125 by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 438mA making it ideal for applications requiring high reliability in compact SMT designs.
TPSD227K010R0050
TPSD227K010R0050 by KYOCERA AVX is a 220uF TANTALUM CAPACITOR with 10V URdc. It features low Tan Delta of 0.08 and ESR of 50mohm, suitable for applications requiring high ripple current up to 693mA in SMT mounting.
TPSD107M016R0125
TPSD107M016R0125 by KYOCERA AVX is a 100uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.016mA, and Ripple Current of 438mA making it ideal for applications requiring high capacitance and low ESR such as power supplies and filtering circuits.
TPSD106M035R0300
TPSD106M035R0300 by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 283mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125 °C.
TPSD687K002R0035
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD107K016R0150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD157M010R0050
TPSD157M010R0050 by KYOCERA AVX is a TANTALUM CAPACITOR with 150uF capacitance and 10V rated DC voltage. It features low Tan Delta of 0.08, high ripple current of 693mA, and low leakage current of 0.015mA. Ideal for applications requiring compact SMT capacitors with high reliability and performance in a wide temperature range from -55 to 125°C.
TPSD685K050R0600
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 6.8 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD337K004R0035
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 4 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD337K006R0045
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD107K010R0050
TPSD107K010R0050 by KYOCERA AVX is a 100uF TANTALUM CAPACITOR with 10V URdc. It features low Tan Delta of 0.06, high Ripple Current of 693mA, and low Leakage Current of 0.01mA. Ideal for applications requiring compact SMT capacitors with high reliability and performance in a wide temperature range from -55 to 125°C.
TPSD226K025R0200
TPSD226K025R0200 by KYOCERA AVX is a 22uF TANTALUM CAPACITOR with 25V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0055mA, and Ripple Current of 346mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125 °C.
TPSD157K010R0100
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD476K025R0250
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSD107K016R0070
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved