Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX's TPSC107K010R0100 is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc, and 0.08 Tan Delta. Ideal for applications requiring high ripple current (420mA) in compact SMT designs. Operating temperature range from -55 to 125 °C makes it suitable for various electronic devices.
Median Price
$0.860
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.190
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$0.670
$0.570
Element14
$0.930
$0.443
$0.435
Farnell
$0.938
$0.497
$0.464
Mouser Electronics
$1.040
$0.473
$0.395
$0.384
DigiKey
$0.472
Newark
$1.120
$0.554
$0.447
Future Electronics
$0.830
Arrow
Verical
$0.350
$0.328
TTI Europe
$0.310
$0.298
TTI
$0.704
DF Sales Co.
$0.300
Nova Conductors
$0.394
Maritex
$0.568
$0.342
$0.252
Component Electronics Inc.
$0.620
$0.460
$0.400
TME
$1.190
$0.548
NAC Semi
$2.900
Cyclops Electronics Ltd
North Shore Components
Chip Stock
Vyrian
IBS Electronics
$1.038
$0.449
Bristol Electronics
Rutronik
$0.344
$0.325
ComSIT Distribution GmbH
ComSIT USA
LIBRA Elektronik GmbH
SIE Connect GmbH - GreenChips
Goldney Electronics S.L.
ACDS - Activité Composants Distribution Service
Classic Components Corporation
Dan-Mar Components
NPI Materials, Inc.
Greenchips
Connect4Technologies Inc.
Florida Circuit
Prism Electronics
Sensible Micro Corp
$0.361
$0.333
New Tech Sourcing
EMSNET
PC Components Company LLC
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$0.200
Semicontronic
$0.195
$0.194
Aztec Data Supply Inc.
$0.250
Corohmni
$0.268
Argo Parts USA
$0.381
$0.370
Continental Prestige Electronics
$0.373
Bastille Electronics
$0.374
$0.356
$0.351
Modulus Dynamics
$0.423
$0.419
$0.406
Advanced Electronics
$0.411
$0.386
Abacus Technologies
Metaverse IC Inc.
Futuretech Components
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Benley Electronics
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Infinite Electronics LLP (Excess)
Computer Components Inc. - USA
Tantalum capacitors have high capacitance values, low leakage, and excellent stability, making them a reliable choice for various applications.
With a capacitance of 100uF, this capacitor can store a significant amount of charge, making it suitable for filtering and smoothing power supplies.
The high maximum operating temperature allows this capacitor to be used in a wide range of environments without the risk of overheating.
The surface mount package style makes it easy to integrate this capacitor into PCB designs, saving space and improving assembly efficiency.
With a rated DC voltage of 10V, this capacitor is suitable for use in low voltage circuits, such as those found in portable electronics.
Fixed Capacitors TPSC107K010R0100 attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TPSC107K010R0100 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Taitron Components
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
National Semiconductor
BFC241646803
Vishay Intertechnology BFC241646803 is a film capacitor with 0.068 uF capacitance, 63 V rated DC voltage, and 25 V rated AC voltage. It features polypropylene dielectric material and is suitable for applications requiring a temperature range of -55 to 85 °C. Ideal for through hole mounting in various electronic circuits.
GRM188R60J106KE47D
Murata Manufacturing
Murata Manufacturing's GRM188R60J106KE47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
CL21A226MAYNNNE
Samsung Electro-mechanics
CL21A226MAYNNNE by Samsung Electro-mechanics is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications in various electronic devices due to its compact rectangular package and multi-layer design.
GCJ32ER71H475KA12L
Murata Manufacturing's GCJ32ER71H475KA12L is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style for surface mounting.
C1608X7R1H104K080AE
TDK
TDK C1608X7R1H104K080AE is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in varying temperatures.
CGA5L1X7R1H106K160AC
TDK's CGA5L1X7R1H106K160AC is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating temperature range, and AEC-Q200 standard compliance. Ideal for automotive applications requiring compact SMT capacitors with high reliability.
0603B103K500CT
American Accurate Components
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; JESD-609 Code: e3;
GRM188R61A106KE69D
Murata Manufacturing's GRM188R61A106KE69D is a 0603 SMT ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
M39006/25-0072
KEMET Corporation
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C105K4RACAUTO7411
KEMET C0603C105K4RACAUTO7411 is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
C1206C106K3RACTU
KEMET C1206C106K3RACTU is a ceramic capacitor with 10uF capacitance, 25V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range. Ideal for SMT applications requiring compact size and high reliability.
TAJA106K010RNJV
KYOCERA AVX
TAJA106K010RNJV by KYOCERA AVX is a 10uF Tantalum Capacitor with 10% positive/negative tolerance, suitable for applications requiring a rated DC voltage of 10V. With a compact SMT package style and dimensions of 3.2mm x 1.6mm x 1.6mm, it operates b/w -55°C to 125°C and has an ESR of 3000 mΩ, making it ideal for various electronic circuits.
0402ZD106MAT2A
0402ZD106MAT2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM188R60J226MEA0D
Murata Manufacturing's GRM188R60J226MEA0D is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CGA3E2C0G1H103J080AA
TDK's CGA3E2C0G1H103J080AA is a ceramic capacitor with capacitance of 0.01uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
C0402C104K4RACAUTO7411
KEMET C0402C104K4RACAUTO7411 is a ceramic capacitor with 0.1uF capacitance, rated at 16V URdc. It has X7R temperature characteristics and -55 to 125°C operating range, suitable for automotive applications meeting AEC-Q200 standard. With SMT package style and wraparound terminals, it offers compact design for surface mounting feature.
CL10A226MO7JZNC
Samsung Electro-mechanics CL10A226MO7JZNC is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
CGA2B3X7R1H104K050BB
The TDK CGA2B3X7R1H104K050BB is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C3216X5R1C476M160AB
TDK's C3216X5R1C476M160AB is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high capacitance stability.
GRM1885C1H101JA01D
Murata Manufacturing's GRM1885C1H101JA01D is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style, it is ideal for compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPSC106K025R0500
TPSC106K025R0500 by KYOCERA AVX is a TANTALUM CAPACITOR with 10uF capacitance and 25V URdc. It features low Tan Delta of 0.06, high ripple current of 188mA, and low leakage current of 0.0025mA, making it ideal for applications requiring stable performance in a compact SMT package.
TPSC476K010R0350
The KYOCERA AVX TPSC476K010R0350 is a TANTALUM CAPACITOR with 47uF capacitance and 10V rated DC voltage. It features low Tan Delta of 0.06, high ripple current of 224mA, and low ESR of 350mohm. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
TPSC107K010R0075
KYOCERA AVX TPSC107K010R0075 is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc. It has low Tan Delta of 0.08 and 484mA ripple current, suitable for SMT applications requiring high reliability in a compact size.
TPSC226K016R0375
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC476K016R0350
KYOCERA AVX TPSC476K016R0350 is a TANTALUM CAPACITOR with 47uF capacitance, 16V URdc. It has low Tan Delta of 0.06 and ESR of 350mohm, suitable for SMT applications requiring high ripple current up to 224mA.
TPSC107K010R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC227K006R0125
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC226K025R0275
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC475K035R0600
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC227K006R0100
KYOCERA AVX TPSC227K006R0100 is a TANTALUM CAPACITOR with 220uF capacitance, 6.3V URdc, and 0.08 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current (0.0139mA) and high ripple current (420mA).
TPSC226K020R0100
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC335K035R0700
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 3.3 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC227K006R0070
TPSC226K020R0150
TPSC107K006R0150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TPSC107M010R0200
KYOCERA AVX TPSC107M010R0200 is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc, and 0.08 Tan Delta. Ideal for SMT applications due to its compact size (6x3.2x2.6mm) and low ESR of 200mohm, suitable for various electronic devices requiring stable performance under temperatures ranging from -55°C to 125°C.
TPSC226K020R0400
TPSC226K025R0400
TPSC107K010R0150
KYOCERA AVX TPSC107K010R0150 is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc. It has low Tan Delta of 0.08 and ESR of 150mohm, suitable for applications requiring high ripple current (343mA) in compact SMT designs.
TPSC107K010R200
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved