Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX's TCJA226M006R0300 is a TANTALUM CAPACITOR with 22uF capacitance, 6.3V URdc, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current (0.0132mA) and high ripple current (200mA).
Median Price
$0.406
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.890
100+ parts
$0.398
1k+ parts
$0.310
10k+ parts
$0.264
Mouser Electronics
$0.399
$0.311
$0.293
Newark
$0.913
$0.436
-
Verical
$0.255
Arrow
$0.304
Chip1Stop
$0.319
Farnell
$0.259
Element14
$0.493
ACDS - Activité Composants Distribution Service
R&J Components
Ashlea Components Ltd
J2 Sourcing AB
Nova Conductors
Kepictronics
Metaverse IC Inc.
Perfect Parts
CPlus Electronics
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Tantalum solid polymer dielectric material offers high reliability and stability, making the capacitor suitable for use in a variety of applications.
Low tan delta indicates low dielectric loss, ensuring efficient performance and minimal energy loss in the capacitor.
Low leakage current results in better efficiency and reliable operation of the capacitor.
High ripple current rating allows the capacitor to handle fluctuations in current effectively, making it suitable for various power supply applications.
Matte tin over nickel terminal finish ensures good solderability and enhances the durability of the capacitor.
The capacitance of 22 uF meets the specific capacitance requirements of certain circuits or applications, providing the necessary storage capacity for energy.
With a rated DC voltage of 6.3 V, the capacitor is suitable for use in low voltage circuits, ensuring safe and reliable operation.
Fixed Capacitors TCJA226M006R0300 attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TCJA226M006R0300 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Yangzhou Yangjie Electronics
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Daco Semiconductor
M39006/22-0351
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
LMK325BJ107MM-T
Taiyo Yuden
Taiyo Yuden's LMK325BJ107MM-T is a ceramic capacitor with 100uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for surface mount applications in various electronic devices.
GRM21BR6YA106KE43L
Murata Manufacturing
Murata Manufacturing's GRM21BR6YA106KE43L is an 0805 SMT ceramic capacitor with 10uF capacitance and 35V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and reliable performance in various electronic devices.
CK05BX104K
Vishay Intertechnology's CK05BX104K is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a temperature coefficient of 15% per °C, making it suitable for applications requiring stable performance across temperatures. With a compact rectangular package design and through-hole mounting feature, it is ideal for various electronic circuits where space-saving and reliable operation are essential.
EEEFT1H331AP
Panasonic
Panasonic EEEFT1H331AP is a 330uF aluminum electrolytic capacitor with 50V URdc. It has a tan delta of 0.1 and ripple current of 585mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105°C operating temperature range.
GRM188R6YA106MA73D
Murata Manufacturing's GRM188R6YA106MA73D is a 0603 SMT ceramic capacitor with 10uF capacitance and 35V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±20% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
CL21B106KOQNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL21B106KOQNNNE is an 0805 SMT ceramic capacitor with 10uF capacitance and 16V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable performance in a compact surface mount package.
C1206C226M8RACTU
KEMET Corporation
KEMET C1206C226M8RACTU is a ceramic capacitor with 22uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package shape and wraparound terminals.
EMVY101ARA101MKE0S
United Chemi-con
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Polarity: POLARIZED;
GRM32EC81C476KE15L
Murata Manufacturing's GRM32EC81C476KE15L is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. With X6S temperature characteristics, it operates b/w -55 to 105 °C, making it ideal for SMT applications requiring high reliability in compact designs. Its multi-layer design and matte tin over nickel terminal finish ensure stable performance in various electronic devices.
CC0603KRX7R7BB105
Yageo
Yageo's CC0603KRX7R7BB105 is a 1uF ceramic capacitor with X7R temperature characteristics, suitable for a wide temperature range from -55 to 125°C. It has a 16V rated DC voltage and ±10% tolerance, making it ideal for various applications requiring stable capacitance values in compact SMT designs. The rectangular package measures 1.6mm x 0.8mm x 0.8mm, featuring wraparound terminals with matte tin finish for easy surface mounting.
GRM1885C1H101JA01D
Murata Manufacturing's GRM1885C1H101JA01D is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style, it is ideal for compact electronic devices.
GRM216R71H103KA01D
Murata Manufacturing's GRM216R71H103KA01D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, with ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
M39006/22-0377
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL10B103KB8NNNC
Samsung Electro-mechanics CL10B103KB8NNNC is a ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRM188Z71A106KA73D
GRM188Z71A106KA73D by Murata is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
GRM31CR60J107ME39L
Murata Manufacturing's GRM31CR60J107ME39L is a ceramic capacitor with 100uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics code. It is used in surface mount applications due to its compact rectangular package shape and wraparound terminals.
CL10B105KA8NNNC
Samsung Electro-mechanics' CL10B105KA8NNNC is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring compact size and high reliability.
C0402C103K3RACAUTO
KEMET C0402C103K3RACAUTO is a ceramic capacitor with 0.01uF capacitance, rated for 25V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it's a compact SMT component with wraparound terminals.
C3225X7S1H106K250AB
TDK
The TDK C3225X7S1H106K250AB is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. Featuring X7S temperature characteristics, it operates b/w -55 to 125 °C, with a 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TCJA106M016R0200
KYOCERA AVX
KYOCERA AVX's TCJA106M016R0200 is a TANTALUM CAPACITOR with 10uF capacitance and 16V rated DC voltage. It features low Tan Delta of 0.06, 200mA ripple current, and -55 to 125 °C operating temperature range. Ideal for applications requiring compact SMT capacitors with high reliability and low leakage current.
Kyocera
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA476M004R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 4 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA107M002R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA106M006R0300
KYOCERA AVX's TCJA106M006R0300 is a 10uF TANTALUM CAPACITOR with 6.3V URdc, ideal for SMT applications. Features include Tan Delta of 0.06, Leakage Current of 0.006mA, and Ripple Current of 200mA, making it suitable for compact electronic devices requiring reliable performance in a wide temperature range.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA106M006R0300E
TCJA106M020R0150E
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA107M006R0150E
KYOCERA AVX's TCJA107M006R0150E is a TANTALUM CAPACITOR with 100 uF capacitance and 6.3 V rated DC voltage. It has a compact size of 1.6 mm x 1.6 mm x 1.6 mm, making it suitable for surface mount applications where space is limited. With low tan delta (0.1) and leakage current (0.06 mA), it ensures efficient performance in various electronic devices.
TCJA106M025R0150E
KYOCERA AVX's TCJA106M025R0150E is a 10uF Tantalum Capacitor with 25V URdc. It features low Tan Delta of 0.06, high Ripple Current of 400mA, and low Leakage Current of 0.025mA. Ideal for applications requiring compact SMT capacitors with reliable performance in temperatures ranging from -55°C to 105°C.
TCJA106M025R0150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA476M006R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA106M010R0300
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA106M010R0200
TCJA107M006R0150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJA226M006R300
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved