Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TAJD226M016RNJV by KYOCERA AVX is a TANTALUM CAPACITOR with 22uF capacitance and 16V rated DC voltage. It features low Tan Delta of 0.06, high ripple current of 148mA, and low leakage current of 0.0035mA, making it ideal for applications requiring stable performance in temperatures ranging from -55 to 125°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$0.010
Corohmni
$0.098
Aztec Data Supply Inc.
$0.484
AZTECH Wire
$14.236
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Tantalum capacitors are known for their high reliability, stable capacitance, and low impedance, making this product a good choice for applications requiring a dependable capacitor.
The high capacitance value of 22uF allows for efficient energy storage and smooth voltage regulation, making this capacitor suitable for various electronic circuits.
The low leakage current ensures minimal power loss and high efficiency in the circuit, making this capacitor a reliable choice for power-sensitive applications.
With a high ripple current rating, this capacitor can handle fluctuating currents and maintain stable performance in applications where smooth power delivery is essential.
The high maximum operating temperature of 125°C allows this capacitor to be used in demanding environments without compromising its performance, making it a versatile choice for different applications.
The SMT package style offers space-saving benefits and easy integration into surface mount technology designs, making this capacitor suitable for compact electronic devices.
Fixed Capacitors TAJD226M016RNJV attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TAJD226M016RNJV Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Infineon Technologies
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Telefunken Microelectronics
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM555CM
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358AN
Samsung
BFC237036472
Vishay Intertechnology
Vishay Intertechnology's BFC237036472 is a rectangular package film capacitor with a capacitance of 0.0047 uF. It has a rated AC voltage of 160 V and a rated DC voltage of 250 V. This capacitor is commonly used in applications requiring fixed capacitors, such as automotive electronics or industrial equipment.
EEEFTH101XAP
Panasonic
Panasonic EEEFTH101XAP is a 100uF aluminum electrolytic capacitor with 50V URdc. It features low Tan Delta of 0.1 and high Ripple Current of 227.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and wide operating temperature range (-55 to 105 °C).
VJ0805Y104JXAAT
Vishay Intertechnology's VJ0805Y104JXAAT is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 150°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CL10C101JB8NNNC
Samsung Electro-mechanics
CL10C101JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With its compact SMT package style and surface mounting feature, this capacitor is ideal for use in electronic devices where space is limited.
C0603C103J3GACTU
KEMET Corporation
KEMET Corporation's C0603C103J3GACTU is a ceramic capacitor with capacitance of 0.01uF, rated for 25V. With a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C, making it ideal for surface mount applications in various electronic devices.
T491B105K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CGA8P1X7R1E226M250KC
TDK
TDK's CGA8P1X7R1E226M250KC is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT package shape and wraparound terminals facilitate easy surface mount installation.
C2012X5R1V226M125AC
The TDK C2012X5R1V226M125AC is a ceramic capacitor with 22uF capacitance and 35V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring reliable energy storage.
1210B475K500CT
Walsin Technology
1210B475K500CT by Walsin Technology is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
CGA2B3X7R1H104K050BD
TDK's CGA2B3X7R1H104K050BD is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C0402C473K4RACAUTO
KEMET C0402C473K4RACAUTO is a ceramic capacitor with 0.047uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and matte tin terminal finish.
M39006/21-0159
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM155R71E473KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71E473KA88D is a ceramic capacitor with capacitance of 0.047uF and rated DC voltage of 25V. It has a temperature coefficient of 15% per °C and operates b/w -55 to 125°C. This SMT capacitor with wraparound terminals is ideal for various electronic applications requiring stable performance in a compact package.
440LS10-R
Vishay Intertechnology's 440LS10-R is a ceramic capacitor with 0.01 uF capacitance, rated at 760 V AC. It has a temperature coefficient of -56/+22% and operates b/w -30 to 125 °C. Ideal for applications requiring fixed capacitors in bulk packaging with radial terminal style.
0402ZD105KAT2A
KYOCERA AVX
0402ZD105KAT2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. SMT package for surface mount applications in electronics requiring compact design and reliable performance.
C1608X5R0J226M080AC
C1608X5R0J226M080AC by TDK is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for SMT applications requiring compact size and high reliability. With a negative tolerance of 20%, this multi-layer capacitor is suitable for various electronic devices.
M39006/25-0248
C0805C105K3RACTU
KEMET C0805C105K3RACTU is a ceramic capacitor with 1uF capacitance, 25V URdc, and X7R temperature characteristics. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Operating range from -55°C to 125°C makes it suitable for various electronic devices.
VJ0805Y104KXATW1BC
Vishay Intertechnology's VJ0805Y104KXATW1BC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
GRM155R61A106ME11D
GRM155R61A106ME11D by Murata is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TAJD106K035RNJ
TAJD106K035RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and low ESR in a wide temperature range from -55 to 125 °C.
TAJD227K010RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD107K016RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD106K035RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD106K050RNJ
TAJD106K050RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 50V URdc. It features Tan Delta of 0.06, Leakage Current of 0.005mA, and ESR of 800mohm. Ideal for applications requiring high ripple current handling in compact SMT designs at temperatures ranging from -55 to 125 °C.
TAJD226K035RNJ
TAJD226K035RNJ by KYOCERA AVX is a 22uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0077mA, and Ripple Current of 163mA. Ideal for applications requiring high reliability in a compact SMT package with a temperature range from -55 to 125 °C.
TAJD476K016RNJ
TAJD476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 163mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125 °C.
TAJD107K016RNJV
KYOCERA AVX TAJD107K016RNJV is a 100uF TANTALUM CAPACITOR with 16V URdc. It has low Tan Delta of 0.06, high Ripple Current of 200mA, and ESR of 600mohm. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
TAJD107K010RNJ
TAJD107K010RNJ by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring low leakage current (0.01mA), it features a compact SMT design with J BEND terminals for easy surface mounting in various electronic devices.
TAJD106K050RNJV
KYOCERA AVX TAJD106K050RNJV is a 10uF TANTALUM CAPACITOR with 50V URdc. It has Tan Delta of 0.06, Leakage Current of 0.005mA, and Ripple Current of 173mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
TAJD227K010RNJV
TAJD477K006RNJ
KYOCERA AVX TAJD477K006RNJ is a 470uF, 6.3V TANTALUM CAPACITOR with Tan Delta of 0.12 and Leakage Current of 0.028mA. Ideal for applications requiring high ripple current handling in compact SMT designs due to its small size (7.3x4.3x2.9mm) and low ESR (400mohm).
TAJD477K006RNJV
KYOCERA AVX TAJD477K006RNJV is a 470uF, 6.3V TANTALUM CAPACITOR with Tan Delta of 0.12 and ESR of 400mohm. Ideal for applications requiring high ripple current (245mA) and low leakage current (0.028mA), such as power supplies and filtering circuits in electronics.
TAJD226K035RNJV
TAJD226K035RNJV by KYOCERA AVX is a 22uF tantalum capacitor with a rated DC voltage of 35V. It features low tan delta of 0.06 and leakage current of 0.0077mA, making it ideal for applications requiring high ripple current tolerance in compact SMT designs.
TAJD107K010RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD107K010RNJY
TAJD107K010RNJY by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance, 10% tolerance, and 10V rated DC voltage. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronics requiring reliable energy storage. The rectangular package with J BEND terminals ensures secure installation and efficient performance.
TAJD107K020RNJ
KYOCERA AVX TAJD107K020RNJ is a 100uF Tantalum Capacitor with 20V URdc. It features Tan Delta of 0.06, Leakage Current of 0.02mA, and Ripple Current of 219mA. Ideal for applications requiring high capacitance in compact SMT designs with operating temperatures ranging from -55 to 125°C.
TAJD336K035RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 33 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD106K025RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD336K035RNJV
TAJD336K035RNJV by KYOCERA AVX is a 33uF tantalum capacitor with a rated DC voltage of 35V. It has a low tan delta of 0.06 and leakage current of 0.0116mA, making it suitable for applications requiring high reliability and stability in a compact size.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved