Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX TAJD107K020RNJ is a 100uF Tantalum Capacitor with 20V URdc. It features Tan Delta of 0.06, Leakage Current of 0.02mA, and Ripple Current of 219mA. Ideal for applications requiring high capacitance in compact SMT designs with operating temperatures ranging from -55 to 125°C.
Median Price
$0.632
Lifecycle Status
Suppliers In-Stock
47
In-Stock Inventory
1k+
Farnell
1+ parts
$1.270
100+ parts
$0.598
1k+ parts
$0.586
10k+ parts
-
Mouser Electronics
$1.640
$0.842
$0.623
$0.564
TTI
$0.684
Element14
$1.020
$0.738
Newark
$0.606
Future Electronics
$1.100
$1.090
Arrow
$0.492
DigiKey
$0.622
Verical
$0.471
$0.437
TTI Europe
$0.458
Avnet
Chip1Stop
$0.563
$0.422
Nova Conductors
$0.518
TME
$1.310
$0.693
$0.574
$0.551
Component Electronics Inc.
$1.540
$1.150
$1.000
Cyclops Electronics Ltd
IBS Electronics
$0.617
NAC Semi
$2.880
Vyrian
ComSIT Distribution GmbH
Rutronik
$0.638
$0.602
Bristol Electronics
Partservice
$0.912
$0.397
PC Components Company LLC
J & M Industries LLC
Micros sp.j. W. Kędra i J. Lic
$0.959
$0.417
Cogito LLC
Micros
$0.431
Sensible Micro Corp
LIBRA Elektronik GmbH
J2 Sourcing AB
Goldney Electronics S.L.
Schukat
$0.808
$0.474
EZ Electronic Parts
ACDS - Activité Composants Distribution Service
Ashlea Components Ltd
Classic Components Corporation
Semi Source
Lantek
Sea View Technologies
Rebound Electronics
EMSNET
Contempo Components LLC
Resion
Holdelec - ElecDif-Pro
Martec Srl
Prism Electronics
Ampacity Inc.
$0.295
Semicontronic
$0.288
$0.286
Argo Parts USA
$0.469
$0.455
Aztec Data Supply Inc.
$0.495
Corohmni
$0.537
Advanced Electronics
$0.553
$0.525
GreenTree Electronics
Eastek
Glotronic Ltd.
Continental Prestige Electronics
$0.585
$0.512
Futuretech Components
Authorized Procurement Solutions
iodParts Technologies Inc.
Computer Components Inc. - USA
Cyclops Electronics Ltd (Excess)
Bastille Electronics
Speed Components Ltd (Excess)
Tantalum capacitors are known for their high capacitance per volume, low leakage current, and long-term stability, making them a reliable choice for various electronic applications.
Low tan delta indicates minimal loss in the capacitor, ensuring efficient energy storage and delivery in the circuit.
Low leakage current leads to better performance and reliability of the capacitor by minimizing power losses.
High ripple current rating allows the capacitor to withstand fluctuations in current, making it suitable for applications with varying loads.
With a rated DC voltage of 20V, this capacitor can safely operate in circuits with voltage levels up to 20V, offering a wide range of application possibilities.
Fixed Capacitors TAJD107K020RNJ attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TAJD107K020RNJ Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
NSN
5910-01-653-6340, 5910016536340
NIIN
016536340
PCN Part Number - TAJ Series Suffix 08/Dec/2008
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Panjit International
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Diodes Incorporated
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
VJ0805Y104JXAAT
Vishay Intertechnology's VJ0805Y104JXAAT is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 150°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/25-0143
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
BFC237035103
Vishay Intertechnology BFC237035103 is a film capacitor with 0.01 uF capacitance, 160 V rated AC voltage, and 250 V rated DC voltage. It is used in applications requiring a fixed capacitor with polyester dielectric material, such as automotive electronics and industrial equipment due to its AEC-Q200 and IEC60384-2 compliance.
12105C106K4Z2A
12105C106K4Z2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, X7R temperature characteristics. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact rectangular package design.
C0603C221J5GACTU
KEMET Corporation
The KEMET C0603C221J5GACTU is a ceramic capacitor with 0.00022uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over a wide temperature range. With SMT package style and compact dimensions of 1.6mm x 0.8mm x 0.8mm, it is ideal for space-constrained electronic devices.
CL10C470JB8NNNC
Samsung Electro-mechanics
CL10C470JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.000047uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance across temperatures. With a compact SMT package style, it is ideal for surface mounting in various electronic devices.
M39006/25-0220
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM188R61C475KAAJD
Murata Manufacturing
Murata Manufacturing's GRM188R61C475KAAJD is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1210C106K3RACTU
KEMET Corporation's C1210C106K3RACTU is a ceramic capacitor with 10uF capacitance, 25V URdc, and X7R temperature code. Ideal for SMT applications with -55 to 125 °C operating range. Features multi-layer design in a rectangular package for various electronic circuits.
0805B104K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
T491A105K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL10A475KP8NNNC
Samsung Electro-mechanics' CL10A475KP8NNNC is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for SMT applications requiring compact size and high reliability. The capacitor's tan delta of 0.1 ensures low dissipation factor for efficient performance in various electronic devices.
06035A220JAT2A
06035A220JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.000022uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact size and high reliability in electronic circuits.
GRM188R71E105KA12D
Murata Manufacturing's GRM188R71E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact rectangular package design.
0402YD104KAT2A
0402YD104KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
C1608X7R1C105K080AC
TDK
TDK C1608X7R1C105K080AC is a 0603 SMT ceramic capacitor with 1uF capacitance, 16V URdc, X7R temp characteristics. Ideal for surface mount applications in electronics due to its compact size, high operating temperature of 125°C, and low temperature coefficient of 15 ppm/°C.
T491A106K016AT
KEMET T491A106K016AT is a 10uF, 16V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 63mA. Ideal for applications requiring compact SMT capacitors with high reliability and low leakage current.
C5750X7R1C476M230KB
The TDK C5750X7R1C476M230KB is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and surface mounting feature.
C0603C104K5RAC7411
KEMET C0603C104K5RAC7411 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its small size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C1608X5R1H104K080AA
The TDK C1608X5R1H104K080AA is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TAJD106K035RNJ
TAJD106K035RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and low ESR in a wide temperature range from -55 to 125 °C.
TAJD227K010RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD107K016RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD106K035RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD106K050RNJ
TAJD106K050RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 50V URdc. It features Tan Delta of 0.06, Leakage Current of 0.005mA, and ESR of 800mohm. Ideal for applications requiring high ripple current handling in compact SMT designs at temperatures ranging from -55 to 125 °C.
TAJD226K035RNJ
TAJD226K035RNJ by KYOCERA AVX is a 22uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0077mA, and Ripple Current of 163mA. Ideal for applications requiring high reliability in a compact SMT package with a temperature range from -55 to 125 °C.
TAJD476K016RNJ
TAJD476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 163mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125 °C.
TAJD107K016RNJV
KYOCERA AVX TAJD107K016RNJV is a 100uF TANTALUM CAPACITOR with 16V URdc. It has low Tan Delta of 0.06, high Ripple Current of 200mA, and ESR of 600mohm. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
TAJD107K010RNJ
TAJD107K010RNJ by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring low leakage current (0.01mA), it features a compact SMT design with J BEND terminals for easy surface mounting in various electronic devices.
TAJD106K050RNJV
KYOCERA AVX TAJD106K050RNJV is a 10uF TANTALUM CAPACITOR with 50V URdc. It has Tan Delta of 0.06, Leakage Current of 0.005mA, and Ripple Current of 173mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
TAJD227K010RNJV
TAJD477K006RNJ
KYOCERA AVX TAJD477K006RNJ is a 470uF, 6.3V TANTALUM CAPACITOR with Tan Delta of 0.12 and Leakage Current of 0.028mA. Ideal for applications requiring high ripple current handling in compact SMT designs due to its small size (7.3x4.3x2.9mm) and low ESR (400mohm).
TAJD477K006RNJV
KYOCERA AVX TAJD477K006RNJV is a 470uF, 6.3V TANTALUM CAPACITOR with Tan Delta of 0.12 and ESR of 400mohm. Ideal for applications requiring high ripple current (245mA) and low leakage current (0.028mA), such as power supplies and filtering circuits in electronics.
TAJD226K035RNJV
TAJD226K035RNJV by KYOCERA AVX is a 22uF tantalum capacitor with a rated DC voltage of 35V. It features low tan delta of 0.06 and leakage current of 0.0077mA, making it ideal for applications requiring high ripple current tolerance in compact SMT designs.
TAJD107K010RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD107K010RNJY
TAJD107K010RNJY by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance, 10% tolerance, and 10V rated DC voltage. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronics requiring reliable energy storage. The rectangular package with J BEND terminals ensures secure installation and efficient performance.
TAJD336K035RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 33 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD106K025RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJD336K035RNJV
TAJD336K035RNJV by KYOCERA AVX is a 33uF tantalum capacitor with a rated DC voltage of 35V. It has a low tan delta of 0.06 and leakage current of 0.0116mA, making it suitable for applications requiring high reliability and stability in a compact size.
TAJD107K020HNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved