Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BAND PASS FILTER;
Median Price
$32.180
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
TTI
1+ parts
-
100+ parts
$34.860
1k+ parts
$34.170
10k+ parts
Chip1Stop
$29.500
Vyrian
Nova Conductors
VNN
Ampacity Inc.
$13.630
Aranea Global
General Purpose Electronic Filters BP0EA4363A700 attributes and parameters. Explore more General Purpose Electronic Filters devices from KYOCERA AVX
Filter Type:
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
ACPF-7024-BLK
Broadcom
BAND PASS FILTER; Width (mm): 1.6; Packing Method: TAPE; Dimensions: L2.0XB1.6XH0.95 (mm)/L0.079XB0.063XH0.037 (inch); JESD-609 Code: e4; Minimum Operating Temperature: -30 Cel;
LTC1069-6IS8#TRPBF
Analog Devices
LTC1069-6IS8#TRPBF by Analog Devices is an 8-terminal LOW PASS FILTER with a max frequency of 0.02 MHz. Operating temp range: -40 to 85 °C. Ideal for general purpose electronic filtering in surface mount applications.
HMC895LP4E
Analog Devices' HMC895LP4E is a 24-terminal band pass filter with a center frequency of 9700 MHz and input impedance of 50 ohms. Operating b/w -40°C to 85°C, it handles average power of 0.0063W. Ideal for electronic applications requiring precise signal filtering in compact spaces.
LP0805A1747ASTR
KYOCERA AVX
KYOCERA AVX LP0805A1747ASTR is a LOW PASS FILTER with 4 terminals. It offers 30 dB attenuation at min frequency of 3495 MHz and 20 dB at max frequency of 5242.5 MHz. Ideal for applications requiring impedance of 50 OHM, such as RF communication systems.
ACPF-8420-BLK
ACPF-7124-BLK
HMC890LP5E
Analog Devices' HMC890LP5E is a 32-terminal BAND PASS FILTER with a center frequency of 1500 MHz and 50 OHM impedance. Operating b/w -40 to 85 °C, it's ideal for electronic applications requiring precise signal filtering in compact spaces. With matte tin finish and surface mounting type, it offers reliable performance at 0.01 W power input.
LTC6602IUF#PBF
LTC6602IUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temperatures from -40 to 85°C. With dimensions of L4.0xB4.0xH0.75 mm, it's ideal for surface mount applications in general purpose electronic filters.
ACPF-7141-BLK
BAND PASS FILTER; No. of Terminals: 3; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Width (mm): 1.6;
LFL212G45TC1A007
Murata Manufacturing
Murata Manufacturing's LFL212G45TC1A007 is a 2450 MHz BAND PASS FILTER with 0.5 dB Max Insertion Loss. With dimensions of 2x1.25x0.95 mm, it is ideal for surface mount applications in electronic devices requiring precise frequency filtering.
LFB212G45BA1A220
Murata Manufacturing's LFB212G45BA1A220 is a Band Pass Filter with 3.8 dB Max Insertion Loss, 2450 MHz Center Frequency, and -40 to 85°C Operating Temp. Ideal for electronic applications requiring surface mount filters in the 2.4 GHz range.
BP0FA1100A700
BP0FA1100A700 by KYOCERA AVX is a 31-terminal BAND PASS FILTER with 1100 MHz Center Frequency, 5 dB Max Insertion Loss, and 50 OHM Impedance. Ideal for electronic applications requiring filtering at temperatures ranging from -55 to 85 °C, it comes in a ceramic package for surface mounting using waffle pack method.
IP4338CX24/LF,135
Nexperia
LOW PASS FILTER; Minimum Operating Temperature: -30 Cel; No. of Terminals: 25; Length: 2.01 mm; Height: .66 mm; Minimum No. of Sections: 1;
HMC882ALP5E
Analog Devices' HMC882ALP5E is a LOW PASS FILTER with 32 terminals, operating from -40 to 85 °C. It offers a frequency range of 0-6900 MHz, VSWR of 1.58, and input/output impedance of 50 OHM. Ideal for applications requiring precise signal filtering in electronic systems.
ACPF-7A24-TR1
BAND PASS FILTER; Width (mm): 0.585; Packing Method: TR, 7 INCH; No. of Terminals: 4; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Mounting Type: SURFACE MOUNT;
LTC6603CUF#TRPBF
LTC6603CUF#TRPBF by Analog Devices is a 24-terminal low pass filter with dimensions of L4.0xB4.0xH0.75 mm, suitable for surface mount applications. It operates b/w 0-70 °C and has matte tin terminal finish, making it ideal for general purpose electronic filtering tasks in various electronic devices.
HMC891LP5E
Analog Devices' HMC891LP5E is a 32-terminal band pass filter with a center frequency of 2950 MHz and input impedance of 50 ohms. Operating b/w -40°C to 85°C, it handles up to 0.01W power. Ideal for applications requiring surface mount filters in electronic systems.
ACPF-8041-BLK
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3; Minimum No. of Sections: 1; Maximum Insertion Loss: 1.8 dB; Output Impedance (ohm): 50 OHM;
DEA166200BT-2356A3
TDK
DEA166200BT-2356A3 by TDK is a 3-terminal BAND PASS FILTER with 6200 MHz Center Frequency, 2.1 dB Max Insertion Loss, and -40 to 90 °C Operating Temp. Ideal for electronic applications requiring high-frequency filtering in compact spaces.
LFB212G45SG8A127
Murata Manufacturing's LFB212G45SG8A127 is a 2450 MHz Band Pass Filter with 1.5 dB Max Insertion Loss, ideal for General Purpose Electronic applications. This surface mount filter has dimensions of 2x1.25x0.95 mm (LxWxH) and features Tin terminal finish for efficient performance in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BP0EA4649A700
BP0EA4649A7TR
BP0EA4649A7TR\250
BP0EA4680A700
BAND PASS FILTER; Package Material: CERAMIC; Length: 11.684 mm; Terminal Finish: Gold (Au); Center/Cutoff Frequency (fo/fc): 4680 MHz; Width (mm): 4.318;
BP0EA4440A700
BAND PASS FILTER; Maximum Insertion Loss: 5 dB; Mounting Type: SURFACE MOUNT; No. of Terminals: 30; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel;
BP0EA4600A700
BAND PASS FILTER; JESD-609 Code: e4; Terminal Finish: Gold (Au); Maximum Operating Temperature: 85 Cel; No. of Terminals: 30; Mounting Type: SURFACE MOUNT;
BP0EA4600A7TR\250
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Height: .5588 mm; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; JESD-609 Code: e4;
BP0EA4600A7TR
BAND PASS FILTER; No. of Terminals: 30; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 5 dB; Impedance (Input): 50 OHM;
BP0EA4680A7TR\250
BAND PASS FILTER; Minimum Operating Temperature: -55 Cel; Center/Cutoff Frequency (fo/fc): 4680 MHz; Terminal Finish: Gold (Au); No. of Terminals: 30; Maximum Insertion Loss: 5 dB;
BP0EA4680A7TR
BAND PASS FILTER; Length: 11.684 mm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 30; Output Impedance (ohm): 50 OHM; JESD-609 Code: e4;
BP0EA4363A7TR\250
BP0EA4260A700
BP0EA4260A7TR
BP0EA4260A7TR\250
BP0EA4583A7TR\250
BP0EA4363A7TR
BP0EA4583A700
BP0EA4550A700
BP0EA4550A7TR
BP0EA4550A7TR\250
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved