Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
12065C475KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 4.7uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Median Price
$0.232
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.137
100+ parts
$0.130
1k+ parts
10k+ parts
-
Mouser Electronics
$0.410
$0.193
$0.143
$0.111
DigiKey
$1.460
$0.700
$0.565
Distrelec
$1.806
$1.416
$1.276
Future Electronics
$0.365
TTI Europe
$0.089
Newark
$0.776
$0.612
Arrow
$0.121
Verical
TTI
$0.078
Element14
$0.334
$0.135
Farnell
$0.109
Chip1Stop
Nova Conductors
Ozdisan Elektronik
$0.156
TME
$0.400
$0.106
Bristol Electronics
$0.487
$0.244
$0.098
$0.073
IBS Electronics
$1.332
$1.177
$0.515
Maritex
$1.583
$0.368
$0.252
$0.218
NAC Semi
$0.740
Vyrian
ComSIT Distribution GmbH
Component Sense
LWI Electronics Inc
North Shore Components
Rutronik
$0.070
Sensible Micro Corp
Goldney Electronics S.L.
VNN
Technoshack Inc.
Atlantic Semiconductor
Martec Srl
Prism Electronics
South Electronics
Elcom Components
Semicontronic
$0.037
$0.036
Ampacity Inc.
$0.065
Argo Parts USA
$0.117
Corohmni
$0.133
Modulus Dynamics
$0.134
$0.129
Advanced Electronics
Continental Prestige Electronics
$0.247
$0.138
$0.118
Aztec Data Supply Inc.
$0.305
Benley Electronics
$0.750
Abacus Technologies
Futuretech Components
Authorized Procurement Solutions
Eastek
GreenTree Electronics
Netroflash
$0.119
$0.115
$0.113
Robosynatics
$1.025
Lucentia Tech
FE SAS
Ceramic material provides high insulation resistance and stable performance over a wide temperature range, making it a reliable choice for various applications.
Rectangular shape allows for efficient use of space on circuit boards, enabling a compact design for electronic devices.
Multi-layer construction increases capacitance density and reduces package size, enhancing the efficiency of the capacitor.
Two terminals facilitate easy connection to the circuit, simplifying the installation process.
High capacitance value allows for storing and releasing a significant amount of electrical energy, making it suitable for filtering and energy storage applications.
With a high rated voltage, this capacitor can withstand higher voltage levels without compromising performance, ensuring reliability in demanding environments.
Fixed Capacitors 12065C475KAT2A attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
12065C475KAT2A Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification (PDF)
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Diodes Incorporated
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
M39006/21-0159
Vishay Intertechnology
Vishay Intertechnology's M39006/21-0159 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 0.37 Tan Delta. It is MIL-PRF-39006/21 compliant and suitable for applications requiring high reliability in harsh environments due to its wet tantalum construction. With a temperature range of -55°C to 125°C, it is ideal for military, aerospace, and industrial electronics.
CGA9N3X7S2A106K230KB
TDK
TDK CGA9N3X7S2A106K230KB is a ceramic capacitor with 10uF capacitance, 100V rated DC voltage, and X7S temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and operating temperatures ranging from -55°C to 125°C.
TAJC476K016RNJ
KYOCERA AVX
TAJC476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 188mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
M39006/22-0639
Vishay Intertechnology's M39006/22-0639 is a TANTALUM CAPACITOR with 86uF capacitance, 100V URdc, and 0.1 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (486mA) and low leakage current (0.009mA). With a tubular package shape, it operates b/w -55 to 125 °C in through-hole mounts.
CL21A226MAQNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL21A226MAQNNNE is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage requirements.
T491C106K025AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T491D106K050AT
KEMET Corporation
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
202R18W102KV4E
Johanson Dielectrics
202R18W102KV4E by Johanson Dielectrics is a ceramic capacitor with 0.001 uF capacitance and 2000 V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its rectangular package shape and surface mounting feature.
CC0402MRX5R5BB475
Yageo CC0402MRX5R5BB475 is a 4.7uF ceramic capacitor with X5R temp characteristics, 6.3V URdc, and 20% tolerance. Ideal for SMT applications in electronics due to its compact size (1x0.5x0.5mm) and temperature coefficient of 15%/°C.
C1206C475K3RACTU
KEMET C1206C475K3RACTU is a ceramic capacitor with 4.7uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GCM21BR71E225KA73L
Murata Manufacturing
Murata Manufacturing's GCM21BR71E225KA73L is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CGA8P1X7R1E226M250KC
TDK's CGA8P1X7R1E226M250KC is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT package shape and wraparound terminals facilitate easy surface mount installation.
M39006/25-0220
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
K104K15X7RF53L2
Vishay Intertechnology's K104K15X7RF53L2 is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. With X7R temperature coefficient and -55 to 125°C operating range, it suits applications requiring stable performance in harsh environments like automotive electronics and industrial equipment.
CGA6M3X7S2A475K200AB
TDK's CGA6M3X7S2A475K200AB is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT rectangular package with wraparound terminals ensures easy surface mount installation.
C1206C106K4RACTU
KEMET C1206C106K4RACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
C1206C105K5RACTU
The KEMET C1206C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CL32B106KBJNNWE
Samsung Electro-mechanics' CL32B106KBJNNWE is a 1210 size ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring stable performance in various electronic devices.
UCD1H221MNL1GS
Nichicon
Nichicon UCD1H221MNL1GS is a 220uF aluminum electrolytic capacitor with 50V URdc. It has low tan delta of 0.10 and leakage current of 0.11mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current rating of 350mA.
M39006/220565
M39006/220565 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 10uF capacitance, 50V URdc, and 0.04 Tan Delta. It has a leakage current of 0.001mA and operates b/w -55 to 125 °C. Ideal for applications requiring high ripple current handling in through-hole mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12065C104JAT2A
12065C104JAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring compact, surface mount fixed capacitors with high reliability and low tolerance requirements.
12061C104KAT2A
12061C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 100V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
12065C104KAT2A
12065C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 3.2mm x 1.6mm x 0.94mm and wraparound terminals.
1206GC102KAT1A
1206GC102KAT1A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 2000 V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high voltage handling capabilities.
12065C223KAT2A
12065C223KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.022 uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring compact, high-performance capacitors in surface mount technology.
12063D106KAT2A
12063D106KAT2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 25V URdc, and X5R temp characteristics. Ideal for SMT applications due to its compact size and surface mounting feature. Suitable for use in electronic devices requiring stable performance in a wide temperature range.
12065C104K4T2A
12065C104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated DC voltage of 50V, and X7R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact dimensions of 3.2mm x 1.6mm x 0.94mm.
12061C103KAT2A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
12063C106KAT2A
12063C106KAT2A by KYOCERA AVX is a 10uF ceramic capacitor with X7R temperature characteristics, suitable for SMT mounting. It has a 10% negative tolerance and operates b/w -55 to 125°C. Ideal for applications requiring stable capacitance in compact electronic devices.
12061C105KAT2A
12061C105KAT2A by KYOCERA AVX is a 1206 SMT ceramic capacitor with 1uF capacitance, rated for 100V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for applications requiring stable performance in harsh environments. Its compact size and surface mount feature make it suitable for various electronic devices.
1206GC102KAT2A
1206GC102KAT2A by KYOCERA AVX is a ceramic capacitor with 0.001uF capacitance and 2000V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high voltage tolerance and stable performance in a compact rectangular package.
12061Z475KAT2A
12061Z475KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 4.7 uF and rated DC voltage of 100 V. It has X7S temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic devices.
1206B102K202CT
Knowles Precision Devices
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Fenghua Advanced Technology
CERAMIC CAPACITOR; Capacitance: .001 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Size Code: 1206;
Walsin Technology
American Accurate Components
CERAMIC CAPACITOR; Capacitance: .001 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Length: 3.2 mm;
12065C105KAT2A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
12065C102KAT2A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
12065C474KAT2A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
12065C475KAZ9A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved