Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Rated Current: 10 A; Capacitance: 22000 uF; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; Terminal Finish: SILVER;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters SFJNL5000223MX1 attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Diameter (mm):
Filter Type:
Height:
Inductance:
Maximum Insertion Loss:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
SFJNL5000223MX1 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Crystalonics
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
HI1812V101R-10
Laird Technologies
HI1812V101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C and has a DC resistance of 0.007 ohm. With dimensions of L4.5XB3.2XH1.4 (mm), it's ideal for applications requiring filtering in the frequency range of 25-1000 MHz at an output impedance of 125 OHM.
NFE31PT471F1E9L
Murata Manufacturing
Murata Manufacturing's NFE31PT471F1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 470uF capacitance. It operates b/w -40 to 85 °C and has matte tin over nickel terminal finish. Ideal for surface mount applications requiring up to 6A current filtering.
BLM15EG121SN1D
Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.
BKP0603HS121-T
Taiyo Yuden
BKP0603HS121-T by Taiyo Yuden is a 0201 multilayer chip ferrite data line filter with dimensions of L.6XB.3XH.3 (mm). It has a max operating temperature of 85°C and min frequency of 100 MHz, making it ideal for surface mount applications requiring noise suppression in electronic circuits.
742792656
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 742792656 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and an output impedance of 750 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies ranging from 100 MHz to 150 MHz.
50105C
The Murata Manufacturing 50105C is a data line filter with 2 functions and 4 terminals. It has an inductance of 1000 uH, max DC resistance of 0.3 ohm, and a rated current of 0.7 A. This surface mount filter is commonly used for noise suppression in data transmission applications.
MI0805K400R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; Minimum Operating Temperature: -55 Cel; Length: 2 mm; Dimensions: L2.0XB1.25XH0.9 (mm)/L0.079XB0.049XH0.035 (inch);
BLM15AG700SN1D
Murata Manufacturing's BLM15AG700SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a max frequency of 100MHz and DC resistance of 0.15 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 70 ohm and rated current of 0.6A.
ACM70V-701-2PL-TL00
TDK
ACM70V-701-2PL-TL00 by TDK is a data line filter with 2 functions and a rated voltage of 80V. It has a min insulation resistance of 10 Mohm and is suitable for applications requiring AEC-Q200 compliance.
MPZ1608R391ATA00
TDK's MPZ1608R391ATA00 is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has an output impedance of 390 ohms and can handle a rated current of 1.2A.
BLM21PG600SN1J
Murata Manufacturing's BLM21PG600SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for data line filtering applications, this ferrite chip is rated for a current of 3A and features tin terminal finish in surface mount packaging.
742792095
Wurth Elektronik 742792095 is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It operates b/w -55 to 125 °C, with dimensions of L2.0xB1.2xH0.9 (mm). Featuring a max frequency of 100 MHz and output impedance of 2700 OHM, it has a DC resistance of 0.6 ohm and rated current of 0.2 A.
P0420NLT
Pulse Electronics
Pulse Electronics P0420NLT is a data line filter with 2 functions, AEC-Q200 screening. It has inductance of 1320uH, max operating temp of 120°C, and rated current of 3.3A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L19.56xB17.02xH9.91mm).
NFM18CC102R1C3D
Murata Manufacturing's NFM18CC102R1C3D is a data line filter with 1000uF capacitance, 16V rated voltage, and 0.6A rated current. It features FEED THROUGH CAPACITOR type for noise suppression in electronic circuits. Ideal for applications requiring high insulation resistance and operating temperatures from -55 to 125°C.
AWCU00453228201XTE
Yageo AWCU00453228201XTE is a Data Line Filter with 2 functions, AEC-Q200 screening. Features 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and -40 to 125 °C Operating Temp. Ideal for automotive applications requiring noise suppression in data lines.
DLW5BSN302SQ2L
DLW5BSN302SQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It operates b/w -40 to 85°C, offering high insulation resistance of 10 Mohm. Ideal for applications requiring filtering in data lines with surface mount installation.
PBY201209T-600Y-N
Yageo's PBY201209T-600Y-N chip bead filter features 2 terminals, matte tin finish, and 60 ohm output impedance. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for data line filtering applications at frequencies ranging from 100 MHz to DC resistance of 0.03 ohm. This surface mount component has a rated current of 3 A and is packed in tape and reel format for easy installation.
BLM18SG700TN1D
Murata's BLM18SG700TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers an output impedance of 70Ω and rated current of 4A. Ideal for surface mount applications, this ferrite chip filter has a max frequency of 100MHz, making it suitable for noise suppression in electronic circuits.
MPZ2012S221AT
The TDK MPZ2012S221AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.04 ohm, it is ideal for applications requiring noise suppression in electronic circuits. Its compact dimensions make it suitable for surface mount installations in various devices.
504-6
West Coast Magnetics
504-6 by West Coast Magnetics is a data line filter with 2 functions and 4 terminals. It has an inductance of 110 uH and max DC resistance of 0.0024 ohm. This surface mount filter is used for noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved