Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Maximum DC Resistance: .5 ohm; Rated Current: 1 A; Height: 1.6 mm; Terminal Finish: Tin (Sn); Length: 3.2 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters SBSPP1000471MCB attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
SBSPP1000471MCB Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sangdest Microelectronics (Nanjing)
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Won-top Electronics
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Jiangsu Changjiang Electronics Technology
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Changzhou Galaxy Century Microelectronics
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
TCK-050
Traco Electronic Ag
Traco Electronic Ag's TCK-050 is a Data Line Filter with 2 functions, inductance of 325uH, and max DC resistance of 0.035 ohm. It is used for noise suppression in data lines, measuring L11.0xB11.0xH8.8mm and rated for 3.3A current flow through THROUGH HOLE MOUNT installation.
B82789C0104N002
TDK
TDK B82789C0104N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 100uH. It operates b/w -55°C to 125°C, has matte tin over nickel finish, and dimensions of L4.5xB3.2xH3.0mm. Ideal for applications requiring filtering in data lines with a max current rating of 0.15A.
74270044
Wuerth Elektronik & Kg
Wurth Elektronik 74270044 is a FERRITE BEAD Data Line Filter with 451 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, and it has a diameter of 15.85 mm. Ideal for applications requiring noise suppression in electronic circuits.
744212510
The Wurth Elektronik 744212510 is a data line filter with a rated voltage of 80V and inductance of 51uH. It has a max operating temperature of 105°C and is suitable for surface mount applications.
USBUF02W6
STMicroelectronics
USBUF02W6 by STMicroelectronics is a DATA LINE FILTER with 6 terminals, UL approved, and MIL-STD-883E screened. It has a max operating temperature of 125°C and min of -40°C. With a capacitance of 100uF, it is ideal for data line filtering applications in various electronic devices.
DR331-513AE
Bourns
Bourns DR331-513AE is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. With dimensions of L7.3xB5.4xH4.7 (mm), it's ideal for surface mount applications in temperature range -40 to 135°C, offering max DC resistance of 0.3 ohm and rated current of 0.5A.
ACT45B-510-2P-TL001
The TDK ACT45B-510-2P-TL001 is a data line filter with 2 functions, rated at 50V and 0.2A. It offers a min insulation resistance of 10 Mohm and operates b/w -40 to 150 °C. Ideal for applications requiring noise suppression in data lines.
BKP1005HS221-TV
Taiyo Yuden
Taiyo Yuden's BKP1005HS221-TV is a FERRITE CHIP filter with 2 terminals, rated for 0.8A current. With dimensions of L1.0XB0.5XH0.5 (mm), it offers an output impedance of 220 OHM and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications due to its compact size and high resistance capabilities.
MMZ1608Y601BT
The TDK MMZ1608Y601BT is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it's ideal for surface mount applications in electronic devices requiring noise suppression and EMI filtering at temperatures ranging from -55 to 125°C.
NZF220DFT1G
Onsemi
NZF220DFT1G by Onsemi is a Data Line Filter with 2 functions and 5 terminals. Featuring FERRITE CHIP filter type, it has a width of 1.35mm and max DC resistance of 110 ohm. Ideal for applications requiring a compact surface mount solution with an output impedance of 50 OHM.
DLM11SN900HY2L
Murata's DLM11SN900HY2L is a Data Line Filter with 2 functions, rated at 5V. It offers a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring filtering in data lines due to its compact dimensions of L1.25xB1.0xH0.5 mm and surface mounting type.
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
2425-001-X5U0-102AALF
Cts
Cts 2425-001-X5U0-102AALF is a FEED THROUGH CAPACITOR with 1000uF capacitance, 100V rated voltage, and 2 terminals. It operates b/w -55 to 125 °C and has a min insulation resistance of 10,000 Mohm. Ideal for PCB mounting in data line filtering applications.
BLM03AX102SN1D
Murata Manufacturing's BLM03AX102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 1.25 ohm, output impedance of 1000 OHM, and rated current of 0.2 A. Ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions L0.6XB0.3XH0.3 (mm).
MMZ1608B601CT
The TDK MMZ1608B601CT is a 0603 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 600 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
DLW21SN371SQ2L
Murata Manufacturing's DLW21SN371SQ2L is a data line filter with 2 functions, rated at 50V and 0.28A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring high impedance filtering in compact spaces.
NFL21SP107X1C3D
Murata Manufacturing's NFL21SP107X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.135 uH inductance and 44 uF capacitance, it operates b/w -55 to 125 °C. Ideal for surface mount applications, this filter has three terminals and is packed in tape format.
BKP1608HS101-T
BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.
NFM21PC224R1C3D
Murata Manufacturing's NFM21PC224R1C3D is a data line filter with 16V rated voltage, 220000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications where high insulation resistance and temperature tolerance are required.
BMB2A1000LN2
TE Connectivity
TE Connectivity's BMB2A1000LN2 is an 0805 multilayer chip data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.3 ohm, it has an output impedance of 1000 OHM and rated current of 0.35 A. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved