Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIRECTIONAL COUPLER;
Median Price
$17.740
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$12.150
1k+ parts
$11.000
10k+ parts
-
Authorized Procurement Solutions
RF/Microwave Couplers FPC06302 attributes and parameters. Explore more RF/Microwave Couplers devices from Knowles Precision Devices
RF or Microwave Device Type:
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
DBTC-9-4L+
Mini-circuits
The Mini-circuits DBTC-9-4L+ is a 50 ohm directional coupler with max input power of 30 dBm and VSWR of 1.6. With a wide frequency range from 5 MHz to 1000 MHz, it is ideal for RF/Microwave applications requiring low insertion loss up to 2 dB in temperatures ranging from -40°C to 85°C.
752
Filtronic Solid State
90 DEGREE HYBRID COUPLER; Minimum Operating Frequency: 1000 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Construction: COAXIAL; Maximum Insertion Loss: .1 dB; Maximum Operating Frequency: 2000 MHz;
CP0805A1747ASTR
KYOCERA AVX
CP0805A1747ASTR by KYOCERA AVX is a RF/Microwave Coupler with max input power of 34.77 dBm and max VSWR of 1.4. It operates in the frequency range of 1710-1785 MHz and is suitable for directional coupling applications.
CP0805B1747ASTR
CP0805B1747ASTR by KYOCERA AVX is a RF directional coupler with 50 ohm impedance, operating from 1710-1785 MHz. It offers low insertion loss of 0.25 dB and can handle up to 34.77 dBm CW power. Ideal for RF/Microwave applications requiring precise power monitoring in temperatures ranging from -40 to 85°C.
R433.464.000
Radiall S A
750
Api Technologies
750 by Api Technologies is a RF/Microwave Coupler with max input power of 60 dBm, VSWR of 1.2, and insertion loss of 0.1 dB. Ideal for applications requiring a 90° hybrid coupler in the frequency range of 250-500 MHz.
XEC24A6-03GR1
Ttm Technologies
XEC24A6-03GR1 by Ttm Technologies is a 90° Hybrid Coupler with max input power of 57.78 dBm, VSWR of 1.22, and insertion loss of 0.15 dB. Ideal for RF applications in the frequency range of 2400-2500 MHz, this surface mount component offers high isolation at 20 dB and operates b/w -55°C to +95°C.
749
Api Technologies' 749 is a COAXIAL RF/Microwave Coupler with 60 dBm CW power, 1.2 VSWR, and 0.1 dB insertion loss. Ideal for applications requiring a 90° HYBRID COUPLER operating b/w 125-250 MHz frequencies.
DBTC-17-5L
Mini-circuits' DBTC-17-5L is a 50 ohm directional coupler with max input power of 33.01 dBm and VSWR of 1.3. Ideal for RF/Microwave applications from 50 MHz to 2 GHz, it has low insertion loss at 1.6 dB making it suitable for various high-frequency systems.
3-10
Tyco Electronics M/a-com
DIRECTIONAL COUPLER; Minimum Operating Frequency: 75000 MHz; Maximum Operating Frequency: 110000 MHz; Construction: WAVEGUIDE; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Insertion Loss: 1.4 dB;
90 DEGREE HYBRID COUPLER; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Insertion Loss: .1 dB; Minimum Operating Frequency: 125 MHz; Maximum Operating Frequency: 250 MHz; Additional Features: N-F;
C2023J5003AHF
Anaren
90 DEGREE HYBRID COUPLER; Maximum Input Power (CW): 36.02 dBm; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2300 MHz;
11303-3
90 DEGREE HYBRID COUPLER; Maximum Insertion Loss: .35 dB; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 520 MHz;
772D
Broadcom
BI-DIRECTIONAL COUPLER; Maximum Input Power (CW): 46.99 dBm; Maximum Operating Frequency: 18000 MHz; Additional Features: N-F, I/P POWER-MAX(PEAK)=250WATT; Maximum Voltage Standing Wave Ratio: 1.4; Construction: COAXIAL;
JPS-2-1W
The Mini-circuits JPS-2-1W is a 180° Hybrid Coupler with max CW input power of 30 dBm, VSWR of 1.1, and max insertion loss of 1.4 dB. Ideal for RF applications requiring high isolation (min 16 dB) and operating frequency range from 3 MHz to 750 MHz. Suitable for surface mount installations in various RF/Microwave systems.
101020010
Krytar
The Krytar 101020010 RF/Microwave Coupler has a max input power of 43.01 dBm and VSWR of 1.35, ideal for frequencies b/w 1000-20000 MHz. With COAXIAL construction, it offers low insertion loss at 1.4 dB making it suitable for directional coupling applications in environments ranging from -54 to 85 °C.
27000
Lockheed Martin Microwave
DIRECTIONAL COUPLER; Minimum Operating Frequency: 2000 MHz; Maximum Voltage Standing Wave Ratio: 1.6; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: .5 dB;
856
L-3 Narda-miteq
DIRECTIONAL COUPLER; Mounting Feature: PANEL MOUNT; Construction: COAXIAL/WAVEGUIDE; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 5850 MHz; Maximum Operating Frequency: 8200 MHz;
30110
30110 by Ttm Technologies is a COAXIAL 180° HYBRID COUPLER with 50 ohm impedance. It offers low 0.6 dB insertion loss, handles up to 53.01 dBm CW power, and has VSWR of 1.27 for RF/Microwave applications b/w 600-1200 MHz.
3-42
DIRECTIONAL COUPLER; Maximum Operating Frequency: 26500 MHz; Construction: WAVEGUIDE; Maximum Insertion Loss: .6 dB; Maximum Voltage Standing Wave Ratio: 1.05; Minimum Operating Frequency: 18000 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved