Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIRECTIONAL COUPLER; Minimum Operating Frequency: 4000 MHz; Maximum Insertion Loss: .3 dB; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; Maximum Operating Frequency: 8000 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Couplers FPC06149 attributes and parameters. Explore more RF/Microwave Couplers devices from Knowles Precision Devices
Characteristic Impedance:
Construction:
Maximum Insertion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
M39029/58-360
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Leshan Radio
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
National Semiconductor
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
753
Sage Laboratories
90 DEGREE HYBRID COUPLER; Maximum Insertion Loss: .1 dB; Construction: COAXIAL; Additional Features: N-F; Minimum Operating Frequency: 2000 MHz; Maximum Operating Frequency: 4000 MHz;
SYDC-20-62HP+
Mini-circuits
Mini-circuits SYDC-20-62HP+ is a RF/Microwave Bi-directional Coupler with 43.98 dBm CW power, 1.1 VSWR, and 0.6 dB insertion loss. Ideal for applications requiring high-power handling and precise signal monitoring in the frequency range of 10 MHz to 540 MHz.
HMR
Emc Technology & Florida Rf Labs
HMR by Emc Technology & Florida Rf Labs is a 90° Hybrid Coupler with max input power of 53.01 dBm, VSWR of 1.2, and insertion loss of 0.14 dB. Ideal for RF applications in the frequency range of 3400-3600 MHz due to its high-quality construction and characteristic impedance of 50 ohm.
30110
Anaren
180 DEGREE HYBRID COUPLER; Maximum Input Power (CW): 53.01 dBm; Maximum Insertion Loss: .6 dB; Additional Features: N-F; Minimum Operating Frequency: 600 MHz; Maximum Voltage Standing Wave Ratio: 1.27;
751
Spectrum Control
DIRECTIONAL COUPLER; Minimum Operating Frequency: 500 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Insertion Loss: .1 dB; Maximum Operating Frequency: 1000 MHz; Maximum Input Power (CW): 60 dBm;
750
Filtronic Solid State
90 DEGREE HYBRID COUPLER; Additional Features: N-F; Maximum Insertion Loss: .1 dB; Minimum Operating Frequency: 250 MHz; Maximum Voltage Standing Wave Ratio: 1.2; Construction: COAXIAL;
4859
L-3 Narda-miteq
DIRECTIONAL COUPLER; Mounting Feature: PANEL MOUNT; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Frequency: 15000 MHz; Additional Features: SMA-F; Construction: COAXIAL/WAVEGUIDE;
DBTC-12-4L
The Mini-circuits DBTC-12-4L is a 50 ohm directional coupler with max input power of 30 dBm and VSWR of 1.3. Ideal for RF/Microwave applications, it operates from -40 to 85 °C, with freq range of 5-1000 MHz and insertion loss of 1.6 dB.
1D1304-6
Anaren 1D1304-6 is a RF directional coupler with max input power of 51.76 dBm, VSWR of 1.17, and insertion loss of 0.25 dB. Ideal for RF/Microwave applications in the frequency range of 800 MHz to 1200 MHz due to its high temperature tolerance (-55°C to +85°C).
C2023J5003AHF
Ttm Technologies
C2023J5003AHF by Ttm Technologies is a 90° Hybrid Coupler with 50Ω impedance, operating from 2-2.3 GHz. It offers low insertion loss of 0.4 dB and can handle up to 36.02 dBm CW power. Ideal for RF applications requiring precise signal splitting in temperatures ranging from -55°C to 85°C.
ADC-10-4
Mini-circuits ADC-10-4 is a 50 ohm directional coupler with max insertion loss of 1.5 dB, suitable for RF/Microwave applications. It can handle up to 30 dBm of CW input power and has a max VSWR of 1.2. Operating temperature range is -40 to 85 °C.
DBTC-12-4L+
The Mini-circuits DBTC-12-4L+ is a 50 ohm RF directional coupler with max input power of 30 dBm and VSWR of 1.2. Ideal for RF/Microwave applications, it operates from -40 to 85°C with insertion loss of 1.8 dB, covering frequencies from 5 MHz to 1000 MHz.
C-115
Crane Aerospace & Electronics
C-115 by Crane Aerospace & Electronics is a 50 ohm bi-directional coupler with max input power of 30 dBm and VSWR of 1.5. It operates b/w -55°C to 85°C, with insertion loss up to 1 dB. Ideal for RF/Microwave applications from 5 MHz to 500 MHz.
DBTC-12-4LX+
Mini-circuits' DBTC-12-4LX+ is a 30 dBm RF directional coupler with 1.5 VSWR, ideal for frequencies ranging from 5 MHz to 1000 MHz. Featuring a max insertion loss of 1.8 dB, this module operates b/w -40°C to 85°C, making it suitable for various RF and microwave applications.
752
90 DEGREE HYBRID COUPLER; Maximum Insertion Loss: .1 dB; Additional Features: N-F; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Frequency: 2000 MHz; Construction: COAXIAL;
11303-3
11303-3 by Ttm Technologies is a RF/Microwave Coupler with max input power of 50.97 dBm, VSWR of 1.28, and insertion loss of 0.35 dB. Ideal for applications requiring a 90° hybrid coupler in the frequency range of 380-520 MHz with operating temperatures from -55°C to 85°C.
R433524000
Radiall S A
R433524000 by Radiall S A is a COAXIAL directional coupler with 50 ohm impedance. It operates b/w 1700-4200 MHz, handling up to 46.99 dBm CW power with a max VSWR of 1.2. Ideal for RF/Microwave applications requiring precise signal direction and low insertion loss (0.4 dB).
90 DEGREE HYBRID COUPLER; Maximum Insertion Loss: .35 dB; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 520 MHz;
DBTC-7-152L+
The Mini-circuits DBTC-7-152L+ is a 50 ohm directional coupler with max input power of 30 dBm and VSWR of 1.4. It operates from 10 MHz to 1500 MHz, with max insertion loss of 3.2 dB. Ideal for RF/Microwave applications requiring precise signal monitoring and power distribution in a compact form factor.
X3C09P1-05S
DIRECTIONAL COUPLER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved