Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED;
Median Price
$0.358
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$0.565
100+ parts
$0.335
1k+ parts
$0.298
10k+ parts
-
Newark
$0.629
$0.340
$0.256
$0.201
TTI Europe
$0.276
$0.222
Element14
$0.356
$0.334
RS (Exports)
$0.354
Bürklin Elektronik
$0.360
$0.300
Vyrian
Rapid Electronics
$0.247
$0.225
Nova Conductors
Continental Prestige Electronics
$0.515
$0.218
$0.179
Argo Parts USA
Bastille Electronics
Visible LEDs L-7104SRC-J4 attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Optoelectronic Type:
L-7104SRC-J4 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Alpha & Omega Semiconductor
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Bourns
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
VLMRGB6112-00-GS08
Vishay Intertechnology's VLMRGB6112-00-GS08 is a 3-element LED with built-in Zener diode, featuring peak wavelengths of 630/518/468nm. With a max forward current of 0.03A and viewing angle of 60°, it's ideal for applications requiring triple color illumination in compact spaces. Suitable for surface mount installations, this LED has a nominal luminous intensity of 730.0/1030.0/230.0mcd.
HSMH-C190
Broadcom
HSMH-C190 by Broadcom is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications, it offers red light with luminous intensity of 17.0mcd, making it suitable for various lighting and display purposes.
QS83XXR24
Apem Components
Visible LEDs;
150141RV73100
Wuerth Elektronik & Kg
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
597-7721-207F
Dialight
Dialight's 597-7721-207F is a dual-color LED with peak wavelengths of 586/565nm. It has a max forward current of 0.03A and a viewing angle of 120°, making it ideal for surface mount applications requiring yellow/green light emission. The LED's water-clear lens and compact size of 2.3876mm make it suitable for various optoelectronic designs.
JE2835AWT-00-0000-000A0HG830E
Cree Led
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Shape: RECTANGULAR; Color: WARM WHITE; Maximum Operating Temperature: 105 Cel;
TLHK5800
Vishay Intertechnology's TLHK5800 is a 5mm red LED with peak wavelength of 643nm, forward current of 0.03A, and luminous intensity of 2500mcd. Ideal for applications requiring single color illumination in environments ranging from -40°C to 100°C.
151051BS04000
151051BS04000 by Wurth Elektronik is a 4.9mm SINGLE COLOR LED with 0.03A forward current and peak wavelength of 465nm. Ideal for applications requiring blue light emission, such as indicator lights in electronic devices due to its diffused lens type and radial mount feature.
3030
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Lens Type: DIFFUSED; Configuration: SINGLE;
KP-1608SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
HLMP-4700
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Shape: ROUND; Peak Wavelength (nm): 635;
HSMS-C190
HSMS-C190 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light, it operates b/w -40 to 85 °C and has surface mounting feature.
HLMP-1719
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
LTST-C193TGKT-5A
Lite-on Technology
LTST-C193TGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 525nm. It has a max forward current of 0.02A and viewing angle of 130°. Ideal for surface mount applications, it emits green light with luminous intensity of 154.0mcd.
HSMY-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
XHP35B-00-0000-0D0HC20E8
KP-1608SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
LTL-4233
LTL-4233 by Lite-on Technology is a 5mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring diffused lighting, such as indicator lights in electronic devices. With a viewing angle of 36°, it offers a nominal luminous intensity of 19mcd for clear visibility.
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
L-934GD-5V
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15; Lens Type: DIFFUSED; Size: 3 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L-7104EC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 627;
Kingbright Electronic
The Kingbright Electronic L-7104EC is a 3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices. With WATER CLEAR lens type, it offers a viewing angle of 34° and nominal luminous intensity of 60.0mcd.
L-7104MD/2GD
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED GREEN; Configuration: SEPARATE, 2 ELEMENTS;
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED; Color: GREEN;
L-7104ZGC-G
L-7104GD-5V
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED; Peak Wavelength (nm): 565;
L-7104ID-12V
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED; T-code: T-1;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED RED; Configuration: SINGLE WITH BUILT-IN RESISTOR;
L-7104ZGC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9000.0; Lens Type: WATER CLEAR; Height: 4.6 mm;
L-7104ZGC by Kingbright Electronic is a 3mm green LED with a peak wavelength of 515nm. It has a max forward current of 0.025A and a viewing angle of 34°. This LED is commonly used in applications such as indicator lights and displays.
L-7104CGDK
L-7104ZGCK
L-710A8EW/1GD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED; Shape: ROUND;
L7104VGC/H
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11000.0; Lens Type: WATER CLEAR; Viewing Angle: 34 deg;
L-7104SRC-E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 800.0; Lens Type: WATER CLEAR; Height: 4.6 mm;
L-7104SRC-G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1300.0; Lens Type: WATER CLEAR; T-code: T-1;
L-7104SRD-F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 350.0; Lens Type: DIFFUSED RED; Terminal Pitch: 2.54 mm;
L-7104SRD-J4
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1500.0; Lens Type: DIFFUSED RED; Height: 4.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved