Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET T520V476M016ATE0707280 is a 47uF, 16V Tantalum Capacitor with low ESR of 70mohm. Ideal for SMT applications, it offers Tan Delta of 0.1 and Ripple Current of 400mA. Suitable for use in electronics requiring compact size and high reliability.
Median Price
$1.246
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$1.128
Arrow
Verical
Vyrian
Nova Conductors
Ampacity Inc.
$0.960
AZTECH Wire
$11.110
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Tantalum solid polymer dielectric material ensures high reliability and stable performance, making this product suitable for various applications.
Low tan delta value indicates low loss factor, which means the capacitor has a high efficiency and minimal energy dissipation.
Low leakage current ensures that the capacitor retains its charge for longer durations, making it reliable for critical applications.
High ripple current rating allows the capacitor to handle fluctuations in current without compromising its performance, making it suitable for demanding power supply applications.
Embossed plastic packaging provides protection and ease of handling during transportation and installation, ensuring the capacitor remains intact and functional.
With a capacitance value of 47 uF, this capacitor offers sufficient storage capacity for charge, making it ideal for filtering and smoothing applications.
Fixed Capacitors T520V476M016ATE0707280 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
T520V476M016ATE0707280 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New England Semiconductor
Db Lectro
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
BFC241841503
Vishay Intertechnology
Vishay Intertechnology BFC241841503 is a film capacitor with 0.015 uF capacitance, 250 V rated DC voltage, and 25 V rated AC voltage. It features polypropylene dielectric material and is designed for applications requiring reliable performance in temperatures ranging from -55 to 85 °C. Ideal for through hole mounting in various electronic circuits.
M39006/30-0038
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC1206KRX7R9BB104
Yageo
Yageo CC1206KRX7R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
CL21B472KBANNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL21B472KBANNNC is an 0805 SMT ceramic capacitor with 0.0047 uF capacitance and 50V URdc. With X7R temp characteristics, it operates from -55 to 125 °C, making it ideal for surface mount applications requiring high temp stability.
C3225X7S1H106M250AB
TDK
TDK C3225X7S1H106M250AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7S temp code. Ideal for surface mount applications in electronics due to its compact size and high temp range (-55 to 125 °C). Features include multi-layer design, matte tin finish, and negative/positive tolerance of 20%.
CC0402JRNPO9BN330
Yageo CC0402JRNPO9BN330 is a 0402 SMT ceramic capacitor with capacitance of 0.000033 uF, rated for 50V. With C0G temp characteristics and 5% tolerance, it's ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. Its compact size and multi-layer design make it suitable for various electronic devices.
M39006/250143
Cornell Dubilier Electronics
M39006/250143 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 330uF capacitance, 50V URdc, and 741mA ripple current. Ideal for MIL-C-39006/25 applications requiring -55 to 125 °C operating temperature range and polarized mounting via THROUGH HOLE MOUNT.
1210YC226KAT2A
KYOCERA AVX
1210YC226KAT2A by KYOCERA AVX is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GMJ316BB7106KLHT
Taiyo Yuden
Taiyo Yuden GMJ316BB7106KLHT is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2mm x 1.6mm x 1.6mm dimensions.
T491B226K016AT
KEMET Corporation
KEMET Corporation's T491B226K016AT is a 22uF, 16V Tantalum Capacitor with low ESR of 2200mohm. Ideal for applications requiring high ripple current (79mA) and low leakage current (0.0035mA). SMT package style makes it suitable for surface mounting in various electronic devices.
M39006/21-0159
Vishay Intertechnology's M39006/21-0159 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 0.37 Tan Delta. It is MIL-PRF-39006/21 compliant and suitable for applications requiring high reliability in harsh environments due to its wet tantalum construction. With a temperature range of -55°C to 125°C, it is ideal for military, aerospace, and industrial electronics.
EEUFR1H102B
Panasonic
Panasonic EEUFR1H102B is a 1000uF, 50V aluminum electrolytic capacitor with tan delta of 0.12 and ripple current of 2490mA. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 105°C.
C1206C104K1RACTU
C1206C104K1RACTU by KEMET is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact dimensions of 3.2mm x 1.6mm x 0.78mm.
C1608X5R0J226M080AC
C1608X5R0J226M080AC by TDK is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for SMT applications requiring compact size and high reliability. With a negative tolerance of 20%, this multi-layer capacitor is suitable for various electronic devices.
T491D106K050AT
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
GRM155R71E104KE14D
Murata Manufacturing
Murata Manufacturing's GRM155R71E104KE14D is a ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications due to its compact rectangular package design.
12101C475KAT2A
12101C475KAT2A by KYOCERA AVX is a 4.7uF ceramic capacitor with 10% tolerance, X7R temperature code, and 100V rated DC voltage. Ideal for surface mount applications in electronics due to its compact size (3.3mm x 2.5mm x 2.79mm) and high operating temperature range (-55°C to 125°C).
C0402C470K5GACTU
KEMET C0402C470K5GACTU is a ceramic capacitor with 0.000047uF capacitance, rated for 50V. With C0G temperature characteristics and 10% tolerance, it's ideal for SMT applications in a wide temp range (-55 to 125°C). Its compact size (1x0.5x0.5mm) makes it suitable for various electronic devices.
CK05BX104K
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
EEEFT1H331AP
Panasonic EEEFT1H331AP is a 330uF aluminum electrolytic capacitor with 50V URdc. It has a tan delta of 0.1 and ripple current of 585mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105°C operating temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T520A106M010ATE080
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B107M006ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B106M016ATE100
KEMET T520B106M016ATE100 is a 10uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.08, Leakage Current of 0.016mA, and Ripple Current of 275mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 105°C.
T520B476M010ATE035
KEMET T520B476M010ATE035 is a 47uF, 10V tantalum capacitor with low ESR of 35mohm. Ideal for SMT applications, it has a compact size of 3.5x2.8x1.9mm and operates b/w -55 to 105°C. Suitable for high ripple current circuits due to its low tan delta of 0.08 and low leakage current of 0.047mA.
T520D227M010ATE018
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520V337M2R5ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520A107M006ATE045
KEMET T520A107M006ATE045 is a 100uF, 6.3V tantalum capacitor with low ESR of 45mohm and tan delta of 0.08. Ideal for SMT applications, it operates b/w -55 to 105°C, suitable for power supply filtering due to its high ripple current rating of 400mA.
T520B227M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B337M2R5ATE015
KEMET Corporation's T520B337M2R5ATE015 is a TANTALUM CAPACITOR with 330uF capacitance, 2.5V URdc, and 0.08 Tan Delta. Ideal for applications requiring high ripple current (725mA) and low leakage current (0.0825mA), such as power supplies and voltage regulators in electronics.
T520A226M010ATE080
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B476M006ATE070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520W337M2R5ATE025
T520D337M006ATE045
KEMET T520D337M006ATE045 is a 330uF, 6.3V tantalum capacitor with low ESR of 45mohm and tan delta of 0.1. Ideal for SMT applications, it operates b/w -55 to 105°C, offering high ripple current of 550mA for power supply circuits in various electronic devices.
T520B476M006ATE0707280
T520D157M010ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520D227M010ATE0187280
T520D107M010ATE018
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520D107M010ATE055
T520Y477M006ATE010
KEMET T520Y477M006ATE010 is a 470uF, 6.3V tantalum capacitor with low ESR of 10mohm. Ideal for SMT applications due to its compact size (7.3x4.3x3.8mm) and high ripple current handling capacity of 1225mA, making it suitable for power supply circuits in various electronic devices.
T520Y477M006ATE0107280
KEMET Corporation's T520Y477M006ATE0107280 is a 470uF, 6.3V tantalum capacitor with Tan Delta of 0.1 and ESR of 10mohm. Ideal for applications requiring high ripple current (1225mA) and low leakage current (0.2961mA), such as power supplies and voltage regulators in electronics.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved