Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET T520D227M010ATE018 is a 220uF, 10V tantalum capacitor with low ESR of 18mohm. Ideal for SMT applications, it operates b/w -55 to 105 °C and has a ripple current of 875mA. Suitable for power supplies, filtering circuits, and decoupling in various electronic devices.
Median Price
$1.446
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.330
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$1.680
$0.761
$0.742
$0.662
RS Americas
$1.760
$1.400
$1.140
Farnell
$2.059
$1.129
Mouser Electronics
$2.470
$1.290
$1.120
TTI Europe
$0.775
$0.760
TTI
$1.260
DigiKey
$1.121
$1.018
Arrow
Verical
Avnet
$0.973
$0.880
Element14
$1.700
$1.520
Nova Conductors
$1.080
Ozdisan Elektronik
$1.144
Component Electronics Inc.
$1.540
$1.150
$1.000
Bristol Electronics
$1.875
$0.694
$0.487
TME
$2.200
$1.070
$0.750
ComSIT Distribution GmbH
MRC Electronics
Vyrian
Sensible Micro Corp
Cyclops Electronics Ltd
Chip Stock
Rutronik
$0.509
$0.504
IBS Electronics
$1.075
NAC Semi
$2.590
$2.360
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
J2 Sourcing AB
Atlantic Semiconductor
Corel Iberica Componentes, S.L.
Sunrise Surplus Inc.
Connector Distribution Corp
Right Parts Inc.
M&R Communications
Goldney Electronics S.L.
Prism Electronics
Semtec, LLC
NexGen Digital
Modulus Dynamics
$0.091
Advanced Electronics
$0.145
$0.138
Aztec Data Supply Inc.
Corohmni
$0.382
Ampacity Inc.
$0.590
Semicontronic
$0.575
$0.572
Continental Prestige Electronics
$1.010
$0.990
Argo Parts USA
Netroflash
$1.026
$1.004
Perfect Parts
Robosynatics
Lucentia Tech
$0.180
$0.177
GreenTree Electronics
Abacus Technologies
Authorized Procurement Solutions
Futuretech Components
Glotronic Ltd.
Kepictronics
Cyclops Electronics Ltd (Excess)
Assy Fe
SIE Connect GmbH (Excess)
Resion (Excess)
The use of tantalum solid polymer as the dielectric material ensures superior stability and reliability, making this capacitor a reliable choice for various applications.
The low tangent delta value indicates minimal energy loss within the capacitor, resulting in efficient operation and high performance.
The low leakage current of 0.22 mA signifies excellent insulation and reliable retention of charge, ensuring long-term functionality.
With a high ripple current rating of 875 mA, this capacitor can effectively handle fluctuations in current, making it suitable for demanding applications.
The capacitance of 220 uF provides ample charge storage capacity, making this capacitor ideal for filtering and decoupling applications.
Fixed Capacitors T520D227M010ATE018 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
T520D227M010ATE018 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Bytesonic Electronics
Silicon Standard
Frontier Electronics
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
VJ0805Y104KXACW1BC
Vishay Intertechnology
Vishay Intertechnology's VJ0805Y104KXACW1BC is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic devices.
0603B104K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
M39006/30-0038
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM32EC81C476KE15L
Murata Manufacturing
Murata Manufacturing's GRM32EC81C476KE15L is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. With X6S temperature characteristics, it operates b/w -55 to 105 °C, making it ideal for SMT applications requiring high reliability in compact designs. Its multi-layer design and matte tin over nickel terminal finish ensure stable performance in various electronic devices.
06035A101JAT2A
KYOCERA AVX
06035A101JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. Its SMT package style makes it suitable for surface mounting feature.
M39006/25-0248
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL05A475MO5NUNC
Samsung Electro-mechanics
CL05A475MO5NUNC by Samsung Electro-mechanics is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability.
CK05BX104K
Cornell Dubilier Electronics
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
BFC241642004
Vishay Intertechnology BFC241642004 is a film capacitor with capacitance of 0.2uF, rated DC voltage of 63V, and operating temperature range from -55 to 85°C. It is used in applications requiring fixed capacitors with polypropylene dielectric material and through hole mounting feature.
T491A105K035AT
KEMET Corporation
KEMET Corporation's T491A105K035AT is a 1uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and Ripple Current of 40mA. Ideal for applications requiring compact SMT capacitors with high ESR and operating temperatures ranging from -55 to 125°C.
CGA5L3X5R1H106K160AB
TDK
TDK's CGA5L3X5R1H106K160AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X5R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and compact 3.2x1.6x1.6mm size for surface mounting feature.
M39006/22-0351
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
GRM31CR61H106KA12L
GRM31CR61H106KA12L by Murata is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X5R temperature characteristics. It is used in surface mount applications for its compact size and high reliability in a wide temperature range from -55 to 85°C.
C2012X7R1V475K125AC
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
GRM155R61C104KA88D
Murata Manufacturing's GRM155R61C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
T491B105K035AT
KEMET T491B105K035AT is a 1uF, 35V Tantalum Capacitor with low Tan Delta of 0.04 and high Ripple Current of 52mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
GRM188R71H103KA01D
The Murata Manufacturing GRM188R71H103KA01D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it has a negative tolerance of 10% and positive tolerance of 10%. This SMT capacitor is ideal for applications requiring compact size and high reliability in electronic circuits.
VJ0805Y104JXAAT
Vishay Intertechnology's VJ0805Y104JXAAT is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 150°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
UCD1H221MNL1GS
Nichicon
Nichicon UCD1H221MNL1GS is a 220uF aluminum electrolytic capacitor with 50V URdc. It has low tan delta of 0.10 and leakage current of 0.11mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current rating of 350mA.
M39006/30-0040
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 850 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T520A106M010ATE080
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B107M006ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B106M016ATE100
KEMET T520B106M016ATE100 is a 10uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.08, Leakage Current of 0.016mA, and Ripple Current of 275mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 105°C.
T520B476M010ATE035
KEMET T520B476M010ATE035 is a 47uF, 10V tantalum capacitor with low ESR of 35mohm. Ideal for SMT applications, it has a compact size of 3.5x2.8x1.9mm and operates b/w -55 to 105°C. Suitable for high ripple current circuits due to its low tan delta of 0.08 and low leakage current of 0.047mA.
T520V337M2R5ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520A107M006ATE045
KEMET T520A107M006ATE045 is a 100uF, 6.3V tantalum capacitor with low ESR of 45mohm and tan delta of 0.08. Ideal for SMT applications, it operates b/w -55 to 105°C, suitable for power supply filtering due to its high ripple current rating of 400mA.
T520B227M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B337M2R5ATE015
KEMET Corporation's T520B337M2R5ATE015 is a TANTALUM CAPACITOR with 330uF capacitance, 2.5V URdc, and 0.08 Tan Delta. Ideal for applications requiring high ripple current (725mA) and low leakage current (0.0825mA), such as power supplies and voltage regulators in electronics.
T520A226M010ATE080
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520B476M006ATE070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520W337M2R5ATE025
T520D337M006ATE045
KEMET T520D337M006ATE045 is a 330uF, 6.3V tantalum capacitor with low ESR of 45mohm and tan delta of 0.1. Ideal for SMT applications, it operates b/w -55 to 105°C, offering high ripple current of 550mA for power supply circuits in various electronic devices.
T520B476M006ATE0707280
T520D157M010ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520D227M010ATE0187280
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520D107M010ATE018
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T520D107M010ATE055
T520Y477M006ATE010
KEMET T520Y477M006ATE010 is a 470uF, 6.3V tantalum capacitor with low ESR of 10mohm. Ideal for SMT applications due to its compact size (7.3x4.3x3.8mm) and high ripple current handling capacity of 1225mA, making it suitable for power supply circuits in various electronic devices.
T520Y477M006ATE0107280
KEMET Corporation's T520Y477M006ATE0107280 is a 470uF, 6.3V tantalum capacitor with Tan Delta of 0.1 and ESR of 10mohm. Ideal for applications requiring high ripple current (1225mA) and low leakage current (0.2961mA), such as power supplies and voltage regulators in electronics.
T520D227M010ANE040
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved