Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
T491X476K035ATAUTO by KEMET: Tantalum capacitor with 47uF capacitance, 35V rated DC voltage, and 0.06 Tan Delta. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range. SMT package style with J bend terminals for surface mounting feature.
Median Price
$1.451
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.230
100+ parts
$1.746
1k+ parts
-
10k+ parts
Mouser Electronics
$3.290
$1.980
$1.550
TTI Europe
$1.362
TTI
$1.540
Farnell
$1.310
$1.080
Chip1Stop
$1.230
Arrow
Verical
Nova Conductors
$1.760
Vyrian
Electronics Depot
Aztec Data Supply Inc.
$0.430
Semicontronic
$1.040
$1.014
$1.009
Ampacity Inc.
Corohmni
$1.673
Advanced Electronics
$1.723
$1.637
Continental Prestige Electronics
$1.740
$1.705
Argo Parts USA
Netroflash
$1.672
Tantalum capacitors have high capacitance per volume, making them ideal for applications where size is a constraint.
Low tan delta indicates low dielectric losses, ensuring efficient energy storage and delivery.
Low leakage current means minimal power loss and enhanced reliability of the product.
With a high maximum operating temperature, this capacitor can withstand harsh environmental conditions.
The high capacitance value allows for storing more energy in a smaller package.
Fixed Capacitors T491X476K035ATAUTO attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Tan Delta:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
Width:
T491X476K035ATAUTO Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
General Semiconductor
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Frontier Electronics
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
First Components International
1554216004
Molex
WIRE AND CABLE;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Cheng-yi Electronic
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
GRM216R71H103KA01D
Murata Manufacturing
Murata Manufacturing's GRM216R71H103KA01D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, with ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
BFC237076104
Vishay Intertechnology
Vishay Intertechnology BFC237076104 is a film capacitor with 0.1 uF capacitance, 63 V rated DC voltage, and 40 V rated AC voltage. It features polyester dielectric material, radial package style, and through hole mount for automotive applications meeting AEC-Q200 standard.
0402B103K250CT
Walsin Technology
0402B103K250CT by Walsin Technology is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It has X7R temperature characteristics, -55 to 125°C operating range, and multi-layer design. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
C0603C103K3RACTU
KEMET Corporation
The KEMET C0603C103K3RACTU is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and multi-layer design.
EMVY101ARA101MKE0S
Nippon Chemi-con
EMVY101ARA101MKE0S by Nippon Chemi-con is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 100V. It features a tan delta of 0.1 and leakage current of 0.1mA, making it suitable for applications requiring high ripple current handling capabilities. With a cylindrical package shape and surface mounting feature, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
VJ0603Y103KXACW1BC
Vishay Intertechnology's VJ0603Y103KXACW1BC is a ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact, high-performance capacitors.
M39006/22-0345
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C103K5RACAUTO7411
KEMET Corporation's C0603C103K5RACAUTO7411 is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.01 uF capacitance. Ideal for automotive applications due to AEC-Q200 standard compliance, rated at 50V DC voltage, and compact SMT package style for surface mounting feature.
M39006/25-0052
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
BFC242041502
Vishay Intertechnology BFC242041502 is a film capacitor with 0.0015uF capacitance, rated for 630V DC and 160V AC. With polypropylene dielectric material, it operates b/w -55 to 85°C and has ±2% tolerance. Ideal for applications requiring fixed capacitors in bulk packaging with through-hole mounting.
M39006/25-0236
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/22-0351
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
VY1222M47Y5UQ63V0
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .0022 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Temperature Characteristics Code: Y5U;
C0603C105K4RACTU
KEMET C0603C105K4RACTU is a ceramic capacitor with 1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C).
06035A102JAT2A
KYOCERA AVX
06035A102JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring high precision and stability in a compact SMT package. Operating b/w -55 to 125 °C, it suits various electronic devices needing reliable performance.
C0805C474K5RACTU
KEMET Corporation's C0805C474K5RACTU is a ceramic capacitor with 0.47uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications, this rectangular package capacitor has a negative tolerance of 10%.
04025C104KAT2A
04025C104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, X7R temp code, and ±10% tolerance. Ideal for surface mount applications in electronics due to its compact size (1mm x 0.5mm x 0.71mm) and temperature coefficient of 15ppm/°C.
ECWF4104HL
Panasonic
The Panasonic ECWF4104HL is a film capacitor with capacitance of 0.1uF and rated DC voltage of 400V. It has a negative tolerance of 3% and operates b/w -40°C to 105°C. Ideal for applications requiring fixed capacitors in bulk packaging, with through-hole mounting feature.
M39006/22-0377
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
VJ0603Y104KXXAC
Vishay Intertechnology's VJ0603Y104KXXAC is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 150 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T491A105K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
KEMET Corporation's T491A105K016AT is a 1uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and Ripple Current of 35mA. Ideal for applications requiring compact SMT capacitors with high ESR and low leakage current in a wide temperature range from -55 to 125°C.
T491A106K016AT
KEMET T491A106K016AT is a 10uF, 16V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 63mA. Ideal for applications requiring compact SMT capacitors with high reliability and low leakage current.
T491A106K010AT
T491A106K010AT by KEMET is a 10uF TANTALUM CAPACITOR with a rated DC voltage of 10V. It has a low Tan Delta of 0.06 and leakage current of 0.001mA, making it suitable for applications requiring high reliability and stability in a compact size.
T491C106K025AT
KEMET T491C106K025AT is a 10uF, 25V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 108mA. Ideal for surface mount applications in electronics requiring stable capacitance at temperatures ranging from -55 to 125°C.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T491B106K016AT
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
KEMET T491B106K016AT is a 10uF, 16V tantalum capacitor with low Tan Delta of 0.06 and high ripple current of 82mA. Ideal for applications requiring compact SMT components with high reliability in temperatures ranging from -55 to 125°C.
T491D106K035AT
KEMET T491D106K035AT is a 10uF, 35V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and performance in a wide temperature range from -55°C to 125°C.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T491B226K016AT
KEMET Corporation's T491B226K016AT is a 22uF, 16V Tantalum Capacitor with low ESR of 2200mohm. Ideal for applications requiring high ripple current (79mA) and low leakage current (0.0035mA). SMT package style makes it suitable for surface mounting in various electronic devices.
T491X107K025AT
T491X107K025AT by KEMET: Tantalum capacitor with 100uF capacitance, 25V rated DC voltage, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling in compact SMT designs.
T491B476K010AT
KEMET Corporation's T491B476K010AT is a 47uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0047mA, and Ripple Current of 117mA. Ideal for applications requiring compact SMT capacitors with high capacitance and low ESR like power supplies and consumer electronics.
T491D107K016AT
KEMET Corporation's T491D107K016AT is a TANTALUM CAPACITOR with 100uF capacitance, 16V URdc, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling up to 185mA, such as power supplies and voltage regulators in electronic devices.
T491D106K025AT
KEMET T491D106K025AT is a 10uF, 25V tantalum capacitor with low Tan Delta of 0.06 and ESR of 1000mohm. Ideal for applications requiring high ripple current (155mA) and operating temperatures from -55 to 125°C in SMT packages.
T491D106K050AT
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
T491B106K020AT
KEMET T491B106K020AT is a 10uF, 20V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 80mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
T491A475K016AT
KEMET T491A475K016AT is a 4.7uF, 16V tantalum capacitor with low ESR of 4000mohm and tan delta of 0.06. Ideal for applications requiring high ripple current (55mA) in compact SMT designs with operating temperatures from -55 to 125°C.
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved