Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
R60ER51005040J by KEMET: 10uF Film Capacitor with 63V URac, -55 to 105°C operating temp. Ideal for through-hole mounting in various electronic applications. Features POLYETHYLENE TEREPHTHALATE dielectric material and TRAY packing method.
Median Price
$3.880
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$2.380
1k+ parts
$2.010
10k+ parts
$1.970
DigiKey
$5.060
$3.108
$2.578
$2.446
Mouser Electronics
$5.140
$3.080
$2.560
-
Element14
$6.460
$5.050
$3.300
$3.270
Chip1Stop
$2.798
Arrow
$2.316
$2.272
Verical
$3.102
Nova Conductors
$2.404
Vyrian
LIBRA Elektronik GmbH
Corohmni
$0.296
Aztec Data Supply Inc.
$0.513
Semicontronic
$2.320
$2.309
Ampacity Inc.
Continental Prestige Electronics
$2.356
Argo Parts USA
Netroflash
$2.284
$2.236
High-quality dielectric material ensures reliable performance and long lifespan.
Simple two-terminal design for easy installation and connectivity.
Suitable for applications requiring up to 63 volts of AC power.
Capable of handling up to 100 volts of DC power, making it versatile for various uses.
Offers a capacitance of 10 microfarads, ideal for filtering and energy storage applications.
Can withstand high temperatures up to 105°C, suitable for demanding environments.
Operates effectively even in low temperatures as low as -55°C.
Convenient through-hole mounting design for secure and stable installation.
Wire terminals provide a reliable connection and easy integration with existing systems.
Tin finish on terminals for improved conductivity and corrosion resistance.
Fixed Capacitors R60ER51005040J attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated AC Voltage (URac):
Rated DC Voltage (URdc):
Terminal Finish:
Terminal Pitch:
Terminal Shape:
Width:
R60ER51005040J Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.70
SB
PCN Design/Specification - Mult Series Marking 25/Jun/2021
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
American Power Devices
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Hy Electronic
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
GRM155R61C104KA88D
Murata Manufacturing
Murata Manufacturing's GRM155R61C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
GRM32ER60J107ME20L
Murata Manufacturing's GRM32ER60J107ME20L is a ceramic capacitor with 100uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics code. Ideal for surface mount applications in electronics due to its compact size and high reliability in a wide temperature range from -55°C to 85°C.
M39006/25-0248
KEMET Corporation
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/30-0038
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C104K8RACTU
KEMET Corporation's C0603C104K8RACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with wraparound terminals.
0603YC104K4T2A
KYOCERA AVX
0603YC104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact size and surface mounting feature.
12105C106K4Z2A
12105C106K4Z2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, X7R temperature characteristics. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact rectangular package design.
C2012X5R1A476M125AC
TDK
The TDK C2012X5R1A476M125AC is a 0805 size ceramic capacitor with a capacitance of 47 uF and a rated DC voltage of 10 V. It is suitable for surface mount applications and has a temperature coefficient of 15% (ppm/°C).
GRM188R60J106KE47D
Murata Manufacturing's GRM188R60J106KE47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
CL05A106MP5NUNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05A106MP5NUNC is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
M39006/22-0360
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
12105C475K4Z2A
12105C475K4Z2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact, high-performance capacitors with negative tolerance of 10%.
M39006/25-0143
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
EEEFK1H221P
Panasonic
Panasonic EEEFK1H221P is a 220uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 502.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
C0603C104K5RAC7411
KEMET C0603C104K5RAC7411 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its small size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
VJ0603Y104KXXCW1BC
Vishay Intertechnology
Vishay Intertechnology's VJ0603Y104KXXCW1BC is a ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has a temperature coefficient of 15% and operates b/w -55 to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and high reliability.
C1608X7R1H104M080AA
TDK C1608X7R1H104M080AA is a 0603 size ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for filtering, decoupling, and energy storage purposes.
CC0603KRX7R9BB473
Yageo
Yageo CC0603KRX7R9BB473 is a SMT ceramic capacitor with 0.047uF capacitance, 50V URdc, X7R temp code. Ideal for applications requiring compact design and high reliability in temperature-sensitive environments. Features include 10% neg/pos tolerance, -55 to 125°C operating range, and multi-layer construction.
M39006/25-0220
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
ESG475M400AH2AA
ESG475M400AH2AA by KEMET Corporation is a 4.7 uF aluminum electrolytic capacitor with a rated DC voltage of 400 V. It has a tan delta of 0.24 and a leakage current of 0.123 mA. This capacitor is commonly used in applications requiring high capacitance and low impedance, such as power supplies and audio amplifiers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R60EW61005000K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60EI42205030J
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60EN4470AA30J
KEMET Corporation's R60EN4470AA30J is a 4.7uF film capacitor with 63V AC and 100V DC ratings. It has a temperature range of -55 to 105°C, suitable for AEC-Q200 automotive applications. The radial package style with wire terminals makes it ideal for through-hole mounting in bulk packaging.
R60EN4330AA30K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 3.3 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60ER5220AA40K
R60ER5220AA40K by KEMET Corporation is a 22uF film capacitor with a rated AC voltage of 63V and a rated DC voltage of 100V. It is commonly used in applications requiring fixed capacitors, such as through-hole mounting in electronic circuits.
R60ER4470AA30K
R60ER4470AA30K by KEMET Corporation is a rectangular package film capacitor with a capacitance of 4.7 uF and a rated DC voltage of 100 V. It is commonly used in applications that require fixed capacitors, such as through hole mounting in electronic devices.
R60EI41005030J
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60EI422040L0K
R60ER5100AA40K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60ER5100503-J
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYESTER;
R60ER5100504-J
R60ER5100DQ3-J
R60ER51005040K
R60ER51005040M
R60ER5100AA40J
R60ER5100CK40J
R60ER5100JA40J
R60ER5100JB40J
R60ER5100JB40K
R60ER5100JE40M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved