Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PMR209MC6100M470R30 by KEMET Corp is a RC network with 470 ohm resistance, 0.1 uF capacitance, and 630V URdc. It is used in applications requiring isolated networks with 30% resistance tolerance and 20% capacitance tolerance. Ideal for through-hole mounting in various electronic circuits.
Median Price
$2.940
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Element14
1+ parts
$1.770
100+ parts
$1.240
1k+ parts
$1.090
10k+ parts
Mouser Electronics
$1.780
$1.540
DigiKey
$2.076
$1.667
$1.380
Newark
$4.230
$2.550
$2.330
$2.110
Distrelec
-
Nova Conductors
$3.270
Vyrian
Ampacity Inc.
$1.500
Continental Prestige Electronics
$2.630
$1.350
$1.030
Bastille Electronics
$3.106
$2.951
$2.910
Authorized Procurement Solutions
Perfect Parts
The rectangular package shape allows for easy installation and configuration in various electronic devices.
The RC network type provides a combination of resistance and capacitance in one compact component, saving space on the circuit board.
The isolated network type ensures that each terminal is electrically independent, preventing interference and ensuring accurate performance.
With 2 terminals, this resistor & capacitor network is easy to connect and integrate into electronic circuits.
The wire terminal shape allows for secure and reliable connections to other components or the circuit board.
The wide terminal pitch of 20.3 mm makes it easy to solder the resistor & capacitor network onto the circuit board.
With a tolerance of 30%, this resistor & capacitor network can still provide accurate performance even with slight variations in resistance.
The compact width of 11.3 mm allows for space-efficient placement on the circuit board.
The through hole mounting feature makes it easy to securely attach the resistor & capacitor network to the circuit board for reliable performance.
Resistor & Capacitor Networks PMR209MC6100M470R30 attributes and parameters. Explore more Resistor & Capacitor Networks devices from KEMET Corporation
Resistance Tolerance:
Rated DC Voltage (URdc):
First Element Resistance:
Capacitance:
Negative Capacitance Tolerance:
Positive Capacitance Tolerance:
Package Shape:
Maximum Seated Height:
Width:
Length:
Mouting Type:
Terminal Finish:
Terminal Shape:
Terminal Pitch:
Network Type:
Resistor/Capacitor Network Type:
No. of RC Elements:
No. of Capacitor Elements:
No. of Resistor Elements:
No. of Terminals:
No. of Functions:
Packing Method:
Minimum Operating Temperature:
Maximum Operating Temperature:
Additional Features:
JESD-609 Code:
PMR209MC6100M470R30 Passive Component Networks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.10
SB
8532.21
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
Bourns
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Silicon Transistor
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
CR0805-FX-10R0ELF
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
PMR209MC6220M068R30
KEMET Corporation
KEMET's PMR209MC6220M068R30 is a RC network with 68 ohm resistance, 0.22 uF capacitance, and 630 V rated DC voltage. Ideal for applications requiring isolated networks with 20% tolerance at temperatures ranging from -40 to 85 °C. RECTANGULAR PACKAGE design with THROUGH HOLE MOUNT feature makes it versatile for various electronic systems.
XE1201
Okaya Electric Industries
XE1201 by Okaya Electric Industries is a rectangular RC network with 2 wire terminals. It has a capacitance of 0.1 uF, resistance of 120 ohm, and can handle up to 250V. Ideal for applications requiring isolated networks with a working temperature range from -40°C to 100°C.
XEB1201
XEB1201 by Okaya Electric Industries is a RC network with 120 ohm resistance, 0.1 uF capacitance, and 250V working voltage. It is used for chassis mount applications in isolated networks requiring flexible wire terminals.
PMR209MC6100M047R30
KEMET's PMR209MC6100M047R30 is a RC network with 47 ohm resistance, 30% tolerance, and 0.1 uF capacitance. Ideal for applications requiring isolated networks in bulk packaging, it operates b/w -40 to 85 °C with a rated voltage of 630 V.
PMR209MC6220M100R30
KEMET's PMR209MC6220M100R30 is a RC network with 100 ohm resistance, 0.22 uF capacitance, and 630V URdc. Ideal for applications requiring isolated networks with 20% tolerance at -40 to 85 °C operating temperatures. RECTANGULAR PACKAGE design with THROUGH HOLE MOUNT feature makes it versatile for various electronic systems.
PMR210MB5220M100R30
PMR210MB5220M100R30 by KEMET Corp is a RC network with 100 ohm resistance, 0.022 uF capacitance, and 30% tolerance. It is used in applications requiring isolated networks with through-hole mounting, operating b/w -40 to 85 °C.
104M06QC22
Paktron
BUSSED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 600 V; Capacitance: .1 uF;
PMR209MC6220M047R30
KEMET's PMR209MC6220M047R30 is a RC network with 47 ohm resistance, 0.22 uF capacitance, and 30% tolerance. Ideal for applications requiring isolated networks in bulk packaging, it operates b/w -40 to 85 °C with URdc of 630 V.
PMZ2035RE6100K150R30
KEMET Corporation's PMZ2035RE6100K150R30 is a RC network with 150 ohm resistance, 0.1 uF capacitance, and 1000 V working voltage. Ideal for applications requiring isolated networks with 2 terminals, such as power supplies and industrial electronics. Operating temperature range from -40 to 85 °C.
PMR205AB6100M100R30
KEMET's PMR205AB6100M100R30 is a Metal Film RC Network with 100 ohm resistance, 30% tolerance, and 0.1 uF capacitance. Ideal for applications requiring a working voltage of 125V, rated power dissipation of 0.5W, and operating temperatures from -40 to 85 °C.
PMR205AB6100M220R30
KEMET Corporation's PMR205AB6100M220R30 is a metal film RC network with 220 ohm resistance, 30% tolerance, and 0.1 uF capacitance. It operates b/w -40 to 85 °C and has a working voltage of 125 V. Ideal for through hole mounting applications requiring isolated network type with two wire terminals.
Evox Rifa Group Oyj
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Technology: METAL FILM; Rated DC Voltage (URdc): 250 V;
PMR209MC6100M100R30
KEMET's PMR209MC6100M100R30 is a RC network with 100 ohm resistance, 20% tolerance, and 0.1 uF capacitance. Ideal for through-hole mounting applications in electronics, it operates b/w -40 to 85 °C with a rated voltage of 630 V.
PMR209ME6470M047R30
PMR209ME6470M047R30 by KEMET Corp is a RC network with 47 ohm resistance, 0.47 uF capacitance, and 630V URdc. It is used in applications requiring isolated networks with 20% tolerance at -40 to 85 °C operating temperatures. Ideal for through-hole mounting with rectangular package shape.
P410QM223M250AH101
KEMET's P410QM223M250AH101 is a RC network with 100 ohm resistance, 0.022 uF capacitance, and 20% tolerance. Ideal for through-hole mounting applications in electronics requiring isolated network type with bulk packaging. Operating temperature range from -40 to 85 °C suits various industrial needs.
104M06QC220
Cornell Dubilier Electronics
104M06QC220 by Cornell Dubilier Electronics is a CARBON COMPOSITION RC NETWORK with 220 ohm resistance, 0.1 uF capacitance, and 600 V working voltage. It is used in applications requiring isolated network type components with through hole mounting for power dissipation up to 0.5 W.
PMR209MB5470M047R30
PMR209MB5470M047R30 by KEMET is a RC network with 47 ohm resistance and 0.047 uF capacitance. It has 20% tolerance, URdc of 630V, and operates b/w -40 to 85 °C. Ideal for through-hole mounting applications requiring isolated networks in rectangular packages.
104M06QC100
104M06QC100 by Cornell Dubilier Electronics is a RC network with 100 ohm resistance and 0.1 uF capacitance. It has a working voltage of 600 V, ideal for applications requiring isolated networks in through hole mounting configurations. With a temperature range from -55 to 85 °C, it offers reliable performance in various electronic systems.
F43PN3250ZF01K
KEMET Corporation's F43PN3250ZF01K is a METAL FILM RC NETWORK with 220 ohm resistance and 0.25 uF capacitance. It has a max operating temperature of 100°C and rated DC voltage of 630 V. Ideal for applications requiring isolated network type, such as industrial electronics and power supplies.
F43KN3100ZB01K
F43KN3100ZB01K by KEMET Corp is a RC network with 100 ohm resistance, 0.1 uF capacitance, and 10% tolerance. It is used in applications requiring isolated networks with wire terminals, operating b/w -40 to 100°C. Ideal for through-hole mounting with rectangular package shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PMR209MB5470M100R30
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Packing Method: BULK;
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; No. of Capacitor Elements: 1;
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Maximum Seated Height: 16.5 mm;
PMR209MC6100M022R30
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Resistance Tolerance: 30 %;
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Package Shape: RECTANGULAR PACKAGE;
PMR209MC6220M022R30
PMR209MC6220M220R30
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Additional Features: RATED AC VOLTAGE(V): 250;
PMR209MC6100M033R30
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; No. of RC Elements: 1;
PMR205AB6100M033R30
PMR205AB6100M047R30
PMR209MC6100M220R30
KEMET Corporation's PMR209MC6100M220R30 is a RC network with 220 ohm resistance, 30% tolerance, and 0.1 uF capacitance. It operates b/w -40 to 85 °C, suitable for through-hole mounting applications requiring isolated networks with bulk packaging.
PMR209MC6100M100R033G
KEMET's PMR209MC6100M100R033G is a RC network with 100 ohm resistance, 0.1 uF capacitance, and 630V URdc. Ideal for applications requiring isolated networks with 20% tolerance, it operates b/w -40 to 85 °C in through-hole mounts. With rectangular packaging at 24mm length, it suits various electronic designs.
PMR209MC6100M100R06
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Length: 24 mm;
PMR209MC6100M100R19T0
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Capacitance: .1 uF;
PMR209MC6100M470R19T0
ISOLATED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Resistor or Capacitor Network Type: RC NETWORK; Rated DC Voltage (URdc): 630 V; Width: 11.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved