Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
C1206C104K1RAC7215 by KEMET is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55 to 125°C, making it suitable for various applications requiring stable performance in a compact SMT package. With a rectangular shape and wraparound terminals, this multi-layer capacitor is ideal for surface mounting in electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$0.010
Aztec Data Supply Inc.
$0.275
Corohmni
$0.411
Semicontronic
$1.010
$0.985
$0.980
AZTECH Wire
$12.612
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Ceramic capacitors have excellent stability over temperature, making them suitable for a wide range of applications.
Rectangular shape helps in efficient placement on a circuit board, saving space.
Multi-layer design allows for higher capacitance values in a compact form factor.
Secure packaging ensures safe transportation and storage of the capacitors.
Having only two terminals simplifies installation and connection in circuits.
Surface mount technology allows for easy and automated assembly of the capacitors onto PCBs.
X7R capacitors offer stable capacitance over a wide temperature range, providing consistent performance.
With a high maximum operating temperature, these capacitors can withstand demanding operating conditions.
The capacitance value of 0.1uF is suitable for filtering applications and decoupling in electronic circuits.
With a high rated voltage, these capacitors can handle voltage spikes and fluctuations in the circuit.
Fixed Capacitors C1206C104K1RAC7215 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
C1206C104K1RAC7215 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.24.00.20
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
1552200168
Molex
WIRE AND CABLE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Semiconductor
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
NXP Semiconductors
Micro Commercial Components
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Kec
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M39006/25-0236
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
EEEFK1H221P
Panasonic
Panasonic EEEFK1H221P is a 220uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 502.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
GRM033R61A104KE15D
Murata Manufacturing
Murata Manufacturing's GRM033R61A104KE15D is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
M39006/22-0639
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM188R61C475KAAJD
Murata Manufacturing's GRM188R61C475KAAJD is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CGA4J1X7R1V475K125AE
TDK
CGA4J1X7R1V475K125AE by TDK is a ceramic capacitor with 4.7uF capacitance, rated at 35V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
GRM188Z71A106KA73D
GRM188Z71A106KA73D by Murata is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
T491A475K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
M39006/25-0143
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM21BR61A226ME51L
Murata Manufacturing's GRM21BR61A226ME51L is a ceramic capacitor with 22uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for SMT applications due to its compact size and surface mounting feature.
BFC237036472
Vishay Intertechnology's BFC237036472 is a rectangular package film capacitor with a capacitance of 0.0047 uF. It has a rated AC voltage of 160 V and a rated DC voltage of 250 V. This capacitor is commonly used in applications requiring fixed capacitors, such as automotive electronics or industrial equipment.
EEEFT1C101AR
Panasonic EEEFT1C101AR is a 100uF Aluminum Electrolytic Capacitor with 16V URdc. It has 0.16 Tan Delta and 156mA Ripple Current, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
EEEFP1H101AP
Panasonic EEEFP1H101AP is a 100uF, 50V Aluminum Electrolytic Capacitor with 0.10 Tan Delta and 435.5mA Ripple Current. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105 °C operating temperature range.
C0603C105K4RACTU
KEMET Corporation
KEMET C0603C105K4RACTU is a ceramic capacitor with 1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C).
CC1206KKX7RDBB102
Yageo
CC1206KKX7RDBB102 by Yageo is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This fixed capacitor is commonly used in surface mount applications.
CC0603ZRY5V9BB104
Yageo CC0603ZRY5V9BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, and -30 to 85°C operating range. Ideal for compact electronic devices requiring high capacitance in a small footprint.
M39006/22-0377
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/21-0159
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1812C105K5RACTU
KEMET C1812C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C1206C104J5RACTU
KEMET C1206C104J5RACTU is a ceramic capacitor with 0.1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics code. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
C1206C105K3RACTU
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C1206C104K1RACTU
C1206C104K1RACTU by KEMET is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact dimensions of 3.2mm x 1.6mm x 0.78mm.
C1206C106K3PACTU
KEMET C1206C106K3PACTU is a 10uF ceramic capacitor with X5R temp characteristics, 25V rated DC voltage. Ideal for SMT applications, it has a compact size of 1.6mm x 1.6mm x 3.2mm and operates b/w -55°C to 85°C, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
C1206C105K5RACTU
The KEMET C1206C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C1206C471J5GACTU
KEMET C1206C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style and matte tin finish, it is ideal for surface mount installations in various electronic devices.
C1206F104K5RACTU
C1206F104K5RACTU by KEMET: Ceramic capacitor with 0.1uF capacitance, 50V URdc, X7R temp code. SMT package style for surface mount applications. Operating range -55 to 125 °C, with 10% tolerance.
C1206C106K3RACTU
KEMET C1206C106K3RACTU is a ceramic capacitor with 10uF capacitance, 25V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range. Ideal for SMT applications requiring compact size and high reliability.
C1206C475K5RACTU
C1206C475K5RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C1206C102KGRACTU
KEMET C1206C102KGRACTU is a ceramic capacitor with 0.001uF capacitance and 2000V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high voltage and stable performance.
C1206C106K4RACTU
KEMET C1206C106K4RACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
C1206C476M8PACTU
KEMET C1206C476M8PACTU is a ceramic capacitor with 47uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact size of 3.2x1.6x1.6mm.
C1206C225K5RACTU
KEMET C1206C225K5RACTU is a ceramic capacitor with 2.2uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in electronics requiring compact fixed capacitors.
C1206C226M8RACTU
KEMET C1206C226M8RACTU is a ceramic capacitor with 22uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package shape and wraparound terminals.
C1206C475K5PACTU
KEMET Corporation's C1206C475K5PACTU is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with multi-layer design.
C1206C107M9PACTU
KEMET Corporation's C1206C107M9PACTU is a ceramic capacitor with 100uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package and wraparound terminals. Operating temperature range from -55°C to 85°C makes it suitable for various electronic devices.
C1206F105K5RACTU
KEMET C1206F105K5RACTU is a ceramic capacitor with 1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
C1206C103K5RACTU
C1206C103K5RACTU by KEMET is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved