Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET ALC10C153EF063 is a 15000uF, 63V aluminum electrolytic capacitor with 5.67mA leakage current and 7020mA ripple current. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 85°C.
Median Price
$22.440
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Farnell
1+ parts
$17.200
100+ parts
$12.500
1k+ parts
$11.410
10k+ parts
-
Mouser Electronics
$16.310
$13.020
DigiKey
$15.921
$13.027
Element14
$27.780
$21.360
$20.510
Nova Conductors
$14.195
Vyrian
VNN
Ampacity Inc.
$11.130
Netroflash
$13.911
Continental Prestige Electronics
$15.070
$11.900
Argo Parts USA
Perfect Parts
Aluminum electrolytic capacitors have high capacitance values and can handle high ripple currents, making them suitable for filtering applications.
Low leakage current indicates high insulation resistance and helps maintain the charge stored in the capacitor for longer durations.
Cylindrical packages are easy to mount and provide a compact solution for various applications.
High ripple current rating allows the capacitor to handle fluctuations in electrical inputs without significant loss in performance.
Having 4 terminals provides secure connections and ensures proper functionality of the capacitor in circuit applications.
Snap-in package style makes installation and replacement of the capacitor convenient and efficient.
Snap-in terminals offer easy and reliable connections, reducing the risk of loose connections or malfunctioning.
A negative tolerance of 20% ensures that the actual capacitance value is within the stated range, providing consistency in performance.
With a maximum operating temperature of 85°C, this capacitor can withstand high temperatures and operate reliably in demanding environments.
Aluminum electrolytic capacitors offer high capacitance values and are suitable for applications requiring high energy storage.
The capacitor can function effectively in low-temperature environments, providing versatility in various operating conditions.
Polarization ensures proper orientation during installation, preventing damage and ensuring correct functionality in the circuit.
The compact diameter allows for space-efficient installation and integration into various electronic designs.
Low ESR value indicates efficient energy storage and discharge capabilities, contributing to the capacitor's performance.
Through-hole mounting provides secure placement and stability of the capacitor in PCBs or electronic assemblies.
The length of the capacitor provides adequate capacitance while maintaining a compact form factor for efficient installation.
The positive tolerance of 20% ensures that the capacitor's actual capacitance does not exceed the specified range, maintaining accuracy in circuit performance.
High capacitance value of 15000 uF allows the capacitor to store and release a large amount of electrical energy, suitable for power supply and filtering applications.
With a rated DC voltage of 63V, the capacitor can handle high voltage applications and ensures reliable operation in various electrical circuits.
Fixed Capacitors ALC10C153EF063 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Terminal Shape:
ALC10C153EF063 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.55
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
0402B103K250CT
Walsin Technology
0402B103K250CT by Walsin Technology is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It has X7R temperature characteristics, -55 to 125°C operating range, and multi-layer design. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
EEEFTE221XAP
Panasonic EEEFTE221XAP is a 220uF aluminum electrolytic capacitor with 25V URdc. It has a tan delta of 0.14 and ripple current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
12065C104K4T2A
KYOCERA AVX
12065C104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated DC voltage of 50V, and X7R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact dimensions of 3.2mm x 1.6mm x 0.94mm.
CC0402KRX5R9BB104
Yageo
Yageo CC0402KRX5R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, and X5R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high temperature range from -55°C to 85°C.
GRM219R61C226ME15L
Murata Manufacturing
GRM219R61C226ME15L by Murata is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
M39006/22-0350
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
UMK212B7104KGHT
Taiyo Yuden
UMK212B7104KGHT by Taiyo Yuden is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It features X7R temperature characteristics and has a compact SMT package style suitable for surface mount applications. With a negative tolerance of 10%, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
GRM155R62A104KE14D
GRM155R62A104KE14D by Murata is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact rectangular package design.
08055C473JAT2A
08055C473JAT2A by KYOCERA AVX is a ceramic capacitor with 0.047uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications due to its compact size (2.01x1.25x0.94mm) and wraparound terminals for easy mounting in various electronic devices.
EEEFK1H470P
Panasonic EEEFK1H470P is a 47uF aluminum electrolytic capacitor with 50V URdc. It has a tan delta of 0.10 and leakage current of 0.0235mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
C3216X7R1H106K160AC
TDK
TDK C3216X7R1H106K160AC is a 1206 SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
CL32B226KAJNNNE
Samsung Electro-mechanics
CL32B226KAJNNNE by Samsung Electro-mechanics is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact rectangular package.
CL10B103KB8NCNC
Samsung Electro-mechanics CL10B103KB8NCNC is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1210C475K5RACTU
KEMET C1210C475K5RACTU is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
BFC241648203
Vishay Intertechnology
Vishay Intertechnology BFC241648203 is a film capacitor with capacitance of 0.082uF, rated DC voltage of 63V, and negative tolerance of 2%. It is used in applications requiring fixed capacitors with polypropylene dielectric material and rectangular package shape for temperatures ranging from -55°C to 85°C.
LMK325BJ107MM-T
Taiyo Yuden's LMK325BJ107MM-T is a ceramic capacitor with 100uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for surface mount applications in various electronic devices.
T491X107K025AT
T491X107K025AT by KEMET: Tantalum capacitor with 100uF capacitance, 25V rated DC voltage, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling in compact SMT designs.
VJ0805Y103KXACW1BC
Vishay Intertechnology VJ0805Y103KXACW1BC is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
GRT31CR61H106KE01L
Murata Manufacturing's GRT31CR61H106KE01L is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package design.
UMK107BJ105KA-T
UMK107BJ105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, 10% negative tolerance, and 15% temp coef. Ideal for SMT applications, this rectangular package measures 1.6mm x 0.8mm x 0.8mm and operates b/w -55°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALC10A471DF450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
Aerovox
ALC10C331ED450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10A680BC550
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 550 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10A681DL500
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10A102EP550
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 550 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10C103EC063
ALC10C103EC063 by KEMET Corp is a 10000 uF aluminum electrolytic capacitor with a rated DC voltage of 63 V. It has a leakage current of 3.78 mA and ripple current of 4580 mA, making it suitable for applications requiring high capacitance and low ESR. Its cylindrical snap-in package style allows for easy through-hole mounting.
ALC10A102EL450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10A102EL450 by KEMET is a 1000 uF aluminum electrolytic capacitor with a rated DC voltage of 450 V. It has a leakage current of 2.7 mA and a ripple current of 4950 mA, making it suitable for applications requiring high capacitance and voltage stability.
ALC10A331EE550
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 550 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10C152EG250
KEMET ALC10C152EG250 is a 1500uF, 250V aluminum electrolytic capacitor with -40 to 85°C operating range. It features 2.25mA leakage current, 5290mA ripple current, and 89mohm ESR. Ideal for applications requiring high capacitance and voltage stability in industrial electronics.
ALC10A561DF450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10A681DL450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10C102EE250
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10D331DD400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALC10A102DF250
ALC10E102EL450
ALC10C471DF450
ALC10C153EB040
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 15000 uF; Rated DC Voltage (URdc): 40 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved