Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALA8DA511DE450 by KEMET Corp is a 510uF, 450V aluminum electrolytic capacitor with 0.6885mA leakage current and 2700mA ripple current. Ideal for automotive applications meeting AEC-Q200 standard, it has -40 to 105°C operating temp range and snap-in package style.
Median Price
$8.140
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Distrelec
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$7.780
Vyrian
VNN
Aztec Data Supply Inc.
$0.130
Corohmni
$0.485
Semicontronic
$6.920
$6.747
$6.712
Continental Prestige Electronics
$7.624
Netroflash
$7.391
$7.235
AZTECH Wire
$13.417
Ampacity Inc.
$15.060
Argo Parts USA
Aluminum electrolytic capacitors are known for their high capacitance values and ability to handle high ripple currents, making them suitable for various applications.
Low leakage current ensures efficient operation and minimal power loss in the circuit.
High ripple current rating allows the capacitor to handle fluctuations in the input voltage without compromising performance.
Snap-in package style makes installation and replacement of the capacitor quick and easy, saving time and effort during assembly.
With a high maximum operating temperature, this capacitor can withstand elevated temperatures without failure, ensuring reliability in demanding environments.
High capacitance value provides ample storage capacity for charge, suitable for applications requiring filtering or energy storage.
This capacitor can handle high DC voltage levels, making it suitable for use in circuits with higher voltage requirements.
Fixed Capacitors ALA8DA511DE450 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Terminal Shape:
ALA8DA511DE450 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.40
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM358N
Kec
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
CGA5L1X7R1V106K160AC
TDK
TDK's CGA5L1X7R1V106K160AC is a 1206 SMT ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.
M39006/22-0351
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C105K3PACTU
KEMET Corporation
KEMET C0603C105K3PACTU is a 1uF ceramic capacitor with 10% tolerance, X5R temp coefficient, and 25V rated voltage. Ideal for SMT applications, it operates b/w -55°C to 85°C. Suitable for various electronic devices requiring compact and reliable capacitors.
M39006/250072
Cornell Dubilier Electronics
M39006/250072 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 702mA ripple current. It is polarized, has a tan delta of 0.37, and operates b/w -55 to 125 °C. Ideal for applications requiring high reliability in military or aerospace sectors.
ECA1CHG102B
ECA1CHG102B by Panasonic is a 1000uF aluminum electrolytic capacitor with 16V rated DC voltage. It features tan delta of 0.20, leakage current of 0.16mA, and ripple current of 560mA, making it ideal for automotive applications meeting AEC-Q200 standard.
NACE4R7M50V5X5.5TR13F
Nic Components
NACE4R7M50V5X5.5TR13F by Nic Components is a 4.7uF, 50V aluminum electrolytic capacitor with tan delta of 0.10 and leakage current of 0.003mA. It is used in SMT applications due to its compact size (5x5.3x5.5mm) and high ripple current capacity of 23mA, suitable for various electronic devices requiring stable capacitance performance at temperatures ranging from -40°C to 85°C.
C1206C103K5RACTU
C1206C103K5RACTU by KEMET is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CL10C102JB8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL10C102JB8NNNC is a ceramic capacitor with 0.001uF capacitance and 50V URdc. With C0G temp characteristics, it operates b/w -55 to 125 °C, ideal for SMT applications requiring compact size and high reliability. Its multi-layer design and matte tin finish make it suitable for various electronic circuits.
EEEFK1H470P
Panasonic EEEFK1H470P is a 47uF aluminum electrolytic capacitor with 50V URdc. It has a tan delta of 0.10 and leakage current of 0.0235mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
GRM188R60J476ME15D
Murata Manufacturing
Murata Manufacturing's GRM188R60J476ME15D is a ceramic capacitor with 47uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
M39006/25-0052
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
EEHZA1V470P
Panasonic EEHZA1V470P is a 47uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 60mohm, tan delta of 0.12, and ripple current of 195mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and solid polymer dielectric material.
CL21B105KBFNNNE
Samsung Electro-mechanics' CL21B105KBFNNNE is a ceramic capacitor with 1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0603C104K5RACAUTO7411
KEMET Corporation's C0603C104K5RACAUTO7411 is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
M39006/25-0248
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C3216X5R1A107M160AC
TDK C3216X5R1A107M160AC is a SMT ceramic capacitor with 100uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for surface mount applications in electronics requiring compact components with high capacitance and low temperature coefficient.
BFC237035223
Vishay Intertechnology
Vishay Intertechnology BFC237035223 is a 0.022 uF film capacitor with 160V AC and 250V DC ratings. It features polyester dielectric, radial package style, and tin terminal finish. Ideal for applications requiring reliable performance in temperatures ranging from -55 to 105 °C, such as automotive electronics meeting AEC-Q200 standards.
GCM188R71H104KA57D
Murata Manufacturing's GCM188R71H104KA57D is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
CL10A105KO8NNNC
CL10A105KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for various applications requiring stable performance in a compact SMT package.
GMK316AB7106KL-TR
Taiyo Yuden
Taiyo Yuden's GMK316AB7106KL-TR is a ceramic capacitor with 10uF capacitance and 35V rated DC voltage. Featuring X7R temperature characteristics, it has a negative tolerance of 10% and tan delta of 0.1. Ideal for SMT applications, this rectangular package capacitor operates b/w -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALA8DA561DF450
ALA8DA561DF450 by KEMET is a 560uF, 450V aluminum electrolytic capacitor with 0.756mA leakage current and 3000mA ripple current. Ideal for automotive applications meeting AEC-Q200 standard, it has -40 to 105 °C operating temperature range and snap-in package style.
ALA8DA271CC400
ALA8DA271CC400 by KEMET is a 270uF aluminum electrolytic capacitor with 400V rated DC voltage. It features a leakage current of 0.324mA, ripple current of 1700mA, and ESR of 558mohm. Ideal for applications requiring high capacitance and voltage stability in automotive electronics.
ALA8DA431CF450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DF431DF500
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA201CC500
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 200 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA431DF500
ALA8DA431DF500 by KEMET Corporation is a snap-in aluminum electrolytic capacitor with a capacitance of 430 uF and a rated DC voltage of 500 V. It has a max operating temperature of 105°C and is commonly used in automotive applications due to its AEC-Q200 reference standard compliance.
ALA8DE431DF500
ALA8DF431CF450
ALA8DF431CF450 by KEMET Corporation is a snap-in aluminum electrolytic capacitor with a capacitance of 430 uF and a rated DC voltage of 450 V. It has a max operating temperature of 105 °C and an equivalent series resistance (ESR) of 318 mohm. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard compliance.
ALA8DA391DC400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 390 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA361CD400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 360 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA361DC450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 360 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA361DE500
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 360 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA431CE400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA431DD450
ALA8DA471DD400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA561DE400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA561EE450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA561EF500
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA681EE400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
ALA8DA681EF450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved